Malco 12F Folding Tool - Creates 3/8" and 1" Bends

Professional Sheet Metal Fabrication | Hand Sight Holes | Sturdy Design | Damascus OR 

🚨 Professional Sheet Metal Folding Tool!

Malco 12F folding tool creates precise 3/8" and 1" bends in sheet metal - essential for gutter and flashing fabrication!

Hand sight holes - Sturdy design - Damascus OR!

✨ What This Folding Tool Does:

• Creates Precise Bends: Forms accurate 3/8" and 1" bends in sheet metal for professional fabrication
• Dual Bend Capacity: Two bend depths (3/8" and 1") for versatile applications
• Hand Sight Holes: Built-in alignment holes allow you to see exactly where you're bending for precision work
• Sheet Metal Fabrication: Essential tool for creating custom flashing, gutter components, and metal trim
• Sturdy Construction: Heavy-duty design withstands repeated use in professional applications
• Malco Quality: Professional-grade tool from trusted sheet metal tool manufacturer
• Portable Design: Compact tool for on-site fabrication work

📋 Technical Specifications:

🏠 Professional Applications:

🔧 What is a Sheet Metal Folding Tool?

A sheet metal folding tool (also called a hand brake or bending tool) is a portable device that creates precise bends in sheet metal without requiring a large brake machine. The Malco 12F is specifically designed for creating two common bend depths: 3/8" and 1", which are standard dimensions used in gutter work, flashing fabrication, and metal trim applications.

How It Works: The folding tool clamps onto the edge of sheet metal and uses leverage to create a clean, precise bend. You position the metal in the tool at the desired bend line, clamp it down, and then fold the metal to the required angle. The tool's design ensures consistent bend depth and angle, which is critical for professional-looking results.

Hand Sight Holes: The built-in sight holes are a key feature that sets professional tools apart. These holes allow you to see through the tool to the metal below, so you can precisely align your bend line with marks on the metal. This is especially important when creating custom flashing or gutter components where accuracy is critical for proper fit and water shedding.

3/8" and 1" Bend Depths: These two bend depths cover the most common applications in gutter and flashing work. The 3/8" bend is perfect for creating drip edges, small flanges, and gutter end cap lips. The 1" bend is ideal for larger flanges on flashing, step flashing legs, and custom gutter components. Having both depths in one tool eliminates the need for multiple bending tools.

Why Gutter Contractors Need This: When installing gutters, you often need custom flashing pieces, modified end caps, or special trim pieces that aren't available as standard products. This folding tool allows you to fabricate these custom components on-site from flat sheet metal, saving time and ensuring perfect fit for each unique situation.

🔧 Usage Guide:

1. Mark bend line: Use a marker or scribe to mark where you want the bend on your sheet metal
2. Select bend depth: Choose 3/8" or 1" side of tool based on your needs
3. Position metal: Place sheet metal in tool with bend line aligned using sight holes
4. Clamp securely: Tighten tool to firmly grip the metal
5. Create bend: Fold the metal up to desired angle (typically 90 degrees)
6. Check alignment: Verify bend is straight and at correct location
7. Release and remove: Open tool and remove finished piece

⚠️ Safety Notice

Always wear safety glasses and gloves when working with sheet metal. Sharp edges can cause cuts. Ensure metal is securely clamped before bending. Keep fingers clear of pinch points. Follow proper sheet metal handling techniques.

🎯 GutterAll Professional Guarantee

Professional Malco folding tool quality guaranteed. This 12F model creates precise 3/8" and 1" bends in sheet metal with hand sight holes for accurate alignment - essential for custom flashing and gutter component fabrication.

🏢 Damascus, OR

Professional Gutter Installation & Supplies Since 2010