White aluminum 5-inch gutter wedge for slope correction and fascia support.
White aluminum 5-inch gutter wedge for slope correction and fascia support.
Galvanized 5-inch gutter wedge for sloped fascia alignment and water drainage.

5" Gutter Wedge Angled Fascia Adapter for 3/12-4/12 Pitch | GutterAll

$1.75

Shipping calculated at checkout

Available Now!
Alum. Brown
Alum. White
Alum. Brown Steep
Alum. White Steep
Galv. Regular
Galv. Steep

5" Professional Gutter Wedge | Angled Fascia Adapter

Levels Gutters on Slanted Fascia | 3/12 to 4/12 Pitch | Professional Grade Aluminum

Trusted by GutterAll.com

The Pacific Northwest's Premier Gutter Supply Partner Since 

Location:
19759 SE Sunnyside Rd
Damascus, OR 97089
Availability:
In Stock - Ready to Ship
Support:
(503) 496-7017

SOLVE THE "TILTED GUTTER" PROBLEM

The Problem: Angled or canted fascia boards (common on ranch-style homes) cause standard gutters to tilt forward. This leads to water overflow, poor drainage, and "tiger striping" stains on your gutters.

The Solution: Our 5" Gutter Wedge snaps onto the back of the gutter, creating a vertical surface that corrects the angle. It perfectly levels your gutter on 3/12 to 4/12 pitch roofs (approx. 20°), ensuring proper function and a professional look.

STOP OVERFLOW & PROTECT YOUR FASCIA TODAY

Why Professionals Use Our Gutter Wedges

📐

Perfect Leveling

Corrects the angle of canted fascia (approx. 20°) so your gutters hang perpendicular to the ground, not tilted.

💪

Structural Support

Reinforces the back of the gutter, preventing collapsing or twisting under heavy water or snow loads.

💧

Improved Flow

By leveling the gutter, water flows efficiently to downspouts instead of pooling or spilling over the front edge.

🛠️

Easy Installation

Simply snaps onto the back of standard 5" K-style gutters. No special tools required. Works with standard hangers.

How It Works: Angled Fascia Correction

ANGLED FASCIA WEDGE LEVEL GUTTER Creates Vertical Surface

The wedge fills the gap created by the angled fascia, providing a plumb surface for the gutter to rest against.

Technical Specifications

Product Type 5" Gutter Wedge / Fascia Adapter
Angle / Pitch 20 Degrees (Fits 3/12 to 4/12 Roof Pitch)
Material Professional Grade Aluminum
Compatibility Standard 5" K-Style Gutters
Recommended Spacing Every 24" (Place at every hanger location)
Application Angled/Canted Fascia, Ranch Style Homes

Frequently Asked Questions

How do I know if I need gutter wedges?
If your fascia board is slanted (angled) rather than vertical, your gutters will tilt forward without wedges. This tilt reduces the gutter's capacity and can cause water to spill over the front. If you have a ranch-style home with angled fascia trim, you likely need wedges.
How many wedges do I need?
We recommend installing one wedge at every hanger location. Standard hanger spacing is every 24 inches (2 feet). So, for a 40-foot run of gutter, you would need approximately 20 wedges.
Do these work with hidden hangers?
Yes! These wedges are designed to snap onto the back of the gutter profile. You install the wedge first, then install your hidden hanger and screw through both the hanger and the wedge into the fascia board for a secure hold.
What roof pitch does this fit?
This standard wedge has a 20-degree angle, which is designed for roof pitches between 3/12 and 4/12. This is the most common pitch for angled fascia on ranch-style homes.
Are they visible from the ground?
The wedges are installed behind the gutter. While a small portion of the side profile might be visible from certain angles, they are largely concealed by the gutter itself, maintaining a clean, professional appearance.