KWM Ironman 6 Inch K-Style Seamless Gutter Machine Commercial Grade
KWM Ironman 6 Inch K-Style Seamless Gutter Machine Commercial Grade
Couldn't load pickup availability
KWM Ironman 6" K-Style Seamless Gutter Machine
Commercial Grade Contractor Equipment | 35 ft/min Production Speed | 1,300 lb Heavy-Duty Frame | Four Package Options | Freight Shipping Nationwide
KWM Ironman 6" K-Style Seamless Gutter Machine — Complete Commercial System
The Pre-Formed Gutter Problem — Why Material Costs Eat Your Margins
Every gutter contractor faces the same math problem. Pre-formed gutter sections cost $3.25–$4.50 per linear foot. A typical residential job uses 150–200 linear feet. That material cost comes straight off the top before labor, overhead, and profit. On a 200-foot job, pre-formed material runs $650–$900. Multiply that across 20–30 jobs per month, and material costs consume a massive share of revenue.
The KWM Ironman 6" K-Style Seamless Gutter Machine — also called a gutter roll former, seamless gutter former, K-style profile machine, continuous gutter mill, on-site gutter forming system, and commercial gutter production line — eliminates the pre-formed markup. At $1.15–$1.75 per linear foot raw coil cost, the savings compound across every job. That same 200-foot job drops from $650–$900 to $230–$350. The difference flows directly to the bottom line.
Product Overview
The KWM Ironman 6" K-Style Seamless Gutter Machine is engineered for professional contractors who demand maximum productivity and superior quality. This commercial-grade gutter roll former produces perfect 6-inch K-style gutters at up to 35 feet per minute, cutting material costs by $2.10–$2.75 per linear foot compared to pre-formed sections. The 1,300 lb heavy-duty frame with .002 hard chrome plated forming rollers and polyurethane drive system delivers consistent results across aluminum, copper, steel, Galvalume, and ternecoat steel. The digital length controller with push-button entry/exit and jog function ensures precise measurements on every run.
Available for local pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089, local delivery in the Portland Metro area, or LTL freight shipping to all 48 contiguous states. Machine ships approximately 1,250 lbs in industrial-grade crating with full insurance and tracking. GutterAll supplies the KWM Ironman 6" gutter machine to gutter contractors throughout the Pacific Northwest and nationally. Contact sales@gutterall.com for package pricing and freight quotes. Monday through Friday 7am to 4pm, Saturday 9am to 12pm PST.
Key Benefits at a Glance
Eliminate pre-formed markup on every job. Savings compound across every linear foot produced.
Industry-leading speed. Produce 2,100 linear feet per hour at full output.
Typical payback period for active contractors. Material savings fund the investment.
Built for years of commercial production. Stable forming geometry for precision profiles.
Key Features
- 35 ft/min production speed — industry-leading output per shift
- Digital length controller with push-button entry/exit and jog function
- .002 hard chrome plated steel forming rollers for consistent profile geometry
- Front pull guillotine shear (standard); commercial guillotine upgrade available
- Polyurethane drive system for smooth, low-maintenance operation
- 3/4 HP, 110V single phase motor — standard outlet, no special wiring required
- 1,300 lb heavy-duty steel frame with reinforced tie-down points for transport
- Compatible with aluminum (.032 gauge), copper (16–20 oz), steel, Galvalume, ternecoat
- Maximum 15-inch coil width for standard residential and commercial profiles
- 3-year parts warranty, 1-year electrical warranty, lifetime phone support
- Freight ships nationwide — LTL crated, insured, tracked, 7–10 business day transit
- Local Damascus delivery available for Portland Metro area contractors
Package Options & Pricing
| Package | What's Included |
|---|---|
| 6" Commercial Machine Only |
Base 6" Ironman machine, digital controller, training materials, 3-yr parts & 1-yr electrical warranty, lifetime phone support |
| Basic Package | Everything in Machine Only + commercial run-out stand, professional tool kit, standard coil cradle (Position 1) |
| Professional Package Most Popular |
Everything in Basic + heavy-duty coil cradle upgrade, commercial guillotine cutter, hover hook system, FREE setup & installation ($1,995 value) |
| Ultimate Package | Everything in Professional + smart machine upgrade with diagnostics, hanger mark assembly, multiple material handling positions, FREE setup & installation ($1,995 value) |
All packages ship freight (LTL) — shipping cost calculated at checkout based on destination. Start a chat or email sales@gutterall.com for freight quotes and financing options.
Technical Specifications
| Production Speed | Up to 35 ft/min |
|---|---|
| Gutter Profile | 6" K-Style (OG) seamless |
| Dimensions | 122"L x 48"H x 24"W |
| Machine Weight | 1,300 lbs |
| Shipping Weight | ~1,250 lbs (crated LTL) |
| Power | 3/4 HP, 110V single phase |
| Drive System | Polyurethane |
| Forming Rollers | .002 hard chrome plated steel |
| Cutting System | Front pull guillotine shear |
| Controls | Digital, push-button + jog |
| Aluminum | .032 gauge (recommended) |
|---|---|
| Copper | 16–20 oz (3/4 hard) |
| Steel | 24 gauge painted, galvanized |
| Specialty | Galvalume, ternecoat steel |
| Coil Width (max) | 15 inches |
| Parts Warranty | 3 years |
| Electrical Warranty | 1 year |
| Support | Lifetime phone support |
| Workspace Required | Approx. 18' x 25' |
| Expected Service Life | 15-20+ years commercial use |
Contractor Applications
| Application | The Situation | Why It Helps |
|---|---|---|
| Residential New Construction | Builder spec work requiring consistent production | 35 ft/min meets tight schedules |
| Commercial Projects | Large-scale buildings requiring high volume | 16,000+ ft daily capacity |
| Residential Replacement | Tear-off and replacement jobs | On-site production = no delay |
| Custom Color Matching | Specialty colors not stocked pre-formed | Stock coil, run any color |
| Extended Seamless Runs | Long runs requiring no seams | Continuous gutter, any length |
Return on Investment
Cost Comparison (Per Linear Foot)
| Method | Material Cost | Speed |
|---|---|---|
| Pre-formed Gutters | $3.25–$4.50 | Standard |
| Ironman Machine | $1.15–$1.75 | 35% Faster |
Monthly ROI Projections
| Monthly Production | Monthly Savings | ROI Timeline |
|---|---|---|
| 5,000 linear feet | $2,500+ | 5–6 months |
| 10,000 linear feet | $5,000+ | 2–3 months |
Section 179 Advantage: Many contractors leverage Section 179 tax deductions to write off the full equipment purchase price in year one, accelerating the financial benefit of the investment.
Who Uses the KWM Ironman 6" Gutter Machine
Gutter Installation Contractors (Primary)
- Residential new construction
- Residential replacement and tear-off
- Commercial gutter installation
- Multi-family and HOA projects
- Builder spec work
- Custom color matching
Why it matters: Own production = own the margin. $2.10–$2.75/ft savings on every job.
General Contractors (Primary)
- New construction projects
- Commercial building work
- Multi-unit developments
- Renovation and remodeling
- Property management contracts
- Vertical integration strategy
Why it matters: Control the gutter portion of larger projects. No subcontractor scheduling.
DIY Homeowners (Secondary)
- Large property owners
- Farm and ranch operations
- Multi-building properties
- Shared equipment co-ops
- Serious hobbyist fabricators
- Secondary income opportunity
Why it matters: Large properties with ongoing needs can justify ownership. Some owners start gutter businesses.
Setup Guide — KWM Ironman 6" Gutter Machine
- Prepare workspace: Clear approximately 18' x 25' area with level flooring. Ensure adequate ventilation and lighting for production work.
- Position machine: Use forklift or appropriate lifting equipment to position the 1,300 lb machine. The Ironman includes reinforced tie-down points for transport.
- Level and secure: Ensure machine is level for proper material feed. Secure to floor or trailer if used for mobile production.
- Connect power: Plug into standard 110V outlet. The 3/4 HP single-phase motor requires no special wiring or dedicated circuits.
- Set up coil cradle: Position coil cradle (included in Basic and higher packages) at proper distance for smooth material feed.
- Load coil material: Mount coil on cradle with proper orientation. Thread leading edge through entry guide toward forming rollers.
- Configure controller: Set digital length controller for desired run length. Familiarize with push-button entry/exit and jog functions.
- Test run: Run 10–15 feet of material at reduced speed to verify profile geometry and controller operation.
- Adjust as needed: Fine-tune roller pressure and alignment if profile shows inconsistencies. Refer to training materials.
- Begin production: Run at full 35 ft/min speed. Monitor first several runs for consistent profile quality.
Pro Tip: Professional and Ultimate packages include FREE on-site setup and installation. GutterAll technicians handle machine positioning, configuration, and crew training — crews are production-ready immediately.
Shipping & Delivery
Local Delivery — Damascus, OR
- Free delivery within 50 miles of Damascus, OR
- Professional unloading and equipment positioning
- Same-day or next-day scheduling available
- On-site setup and training included with Professional & Ultimate Packages
- Serving Portland Metro, Gresham, Happy Valley, Oregon City, Clackamas
Nationwide LTL Freight Shipping
- Ships LTL freight — approximately 1,250 lbs in industrial-grade crating
- Full tracking and insurance coverage included
- Liftgate service available (additional fee)
- Typical transit: 7–10 business days after 2–5 business day handling
- Available to all 48 contiguous states
Freight cost calculated at checkout. Start a chat or email sales@gutterall.com for a freight quote before purchasing.
Warehouse Pickup
- Pick up at 19759 SE Sunnyside Rd, Damascus, OR 97089
- Monday–Friday, 7am–4pm PST | Saturday, 9am–12pm PST
- Bring appropriate flatbed or trailer (machine is 1,300 lbs / 122" long)
- Forklift available on-site for loading assistance
Warranty Coverage
| Coverage | Duration | Details |
|---|---|---|
| Parts Warranty | 3 years | All mechanical components against manufacturing defects |
| Electrical Warranty | 1 year | Complete electrical system and digital controller |
| Phone Support | Lifetime | Technical assistance for the life of the machine at (503) 850-6784 |
Why Buy from GutterAll?
The GutterAll team sells and uses gutter equipment daily. Practical, hands-on experience — not just spec sheets.
GutterAll handles LTL freight for heavy commercial equipment regularly. Machines ship fully crated, insured, and tracked to all 48 contiguous states.
Equipment financing from 24–60 months. Many contractors leverage Section 179 deductions to write off the full purchase price in year one.
Lifetime phone support, hands-on Damascus showroom demos, and a complete parts supply chain — support for as long as the machine runs.
Why Contractors Choose the KWM Ironman 6" Gutter Machine
- $2.10–$2.75/ft Material Savings: Eliminate pre-formed markup on every job
- 35 ft/min Production Speed: Industry-leading output per shift
- 2–6 Month ROI: Typical payback period for active contractors
- 1,300 lb Commercial Frame: Stable forming geometry for precision profiles
- .002 Hard Chrome Rollers: Consistent profiles through years of production
- Digital Length Controller: Precise measurements with push-button operation
- Multi-Material Capability: Aluminum, copper, steel, Galvalume, ternecoat
- 110V Single Phase: Standard outlet — no special wiring required
- Seamless Runs Any Length: No seams means fewer leak points
- On-Site Production: No supplier schedules, no transportation damage
- Four Package Options: Scale from core machine to complete system
- Commercial Guillotine Cutter: Clean cuts in Professional and Ultimate packages
- 3-Year Parts Warranty: Manufacturer confidence in long-term reliability
- Lifetime Phone Support: Technical assistance for the life of the machine
- Section 179 Eligible: Potential full deduction in year one
Frequently Asked Questions
What makes the KWM Ironman superior to other gutter machines?
The KWM Ironman features heavy-duty 1,300 lb construction, .002 hard chrome plated steel forming rollers, and a polyurethane drive system for superior durability. At 35 ft/min production speed with digital length control, it outperforms most competitors while maintaining precision. The 3-year parts warranty and lifetime phone support demonstrate confidence in the machine's long-term reliability.
How quickly will this machine pay for itself?
Most contractors see ROI within 2–6 months depending on volume. Material savings average $2.10–$2.75 per linear foot versus pre-formed gutters. Contractors producing 5,000+ feet monthly typically recover their investment in 5–6 months; high-volume operations at 10,000+ feet see ROI in 2–3 months.
Which package should I choose?
Machine Only suits contractors with existing support equipment. Basic Package is ideal for those entering the seamless gutter market. Professional Package (most popular) adds the commercial guillotine, hover hook system, and free setup. Ultimate Package is for high-volume operations needing smart diagnostics and multiple material handling positions. Start a chat or email sales@gutterall.com for package recommendations based on your operation.
What is the return policy?
GutterAll accepts returns within 30 days of purchase for machines in original condition. Return freight is the buyer's responsibility for non-defective returns. Defective machines are repaired or replaced under warranty at no charge. Contact sales@gutterall.com or call (503) 850-6784 to initiate a return or discuss warranty service.
How is the machine shipped?
The KWM Ironman ships LTL freight — approximately 1,250 lbs in an industrial-grade crate. It ships to all 48 contiguous states with full insurance and tracking. Liftgate service is available at an additional fee. Typical transit is 7–10 business days after a 2–5 business day handling period. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm and Saturday 9am to 12pm PST. Local delivery in the Portland metro area is also available.
What materials can the Ironman handle?
The Ironman handles .032 gauge aluminum (recommended), 16–20 oz copper (3/4 hard), 24 gauge painted and galvanized steel, Galvalume, and ternecoat steel. Maximum coil width is 15 inches. The digital controller maintains precision regardless of material type.
Customer Reviews
"The KWM Ironman transformed our operation. We went from buying pre-formed sections to producing seamless gutter on-site at 35 ft/min. ROI was under 4 months. GutterAll's team made the freight delivery and setup completely seamless."
"Bought the Professional Package. The commercial guillotine cutter and hover hook system were game changers for our crew. Freight arrived well-crated with zero damage. The nationwide shipping process was smooth from start to finish."
"We upgraded to the Ultimate Package and the smart diagnostics have eliminated downtime. GutterAll was responsive throughout the entire freight process and the setup assistance was thorough. Would not hesitate to recommend."
Equipment Safety Notice
The KWM Ironman is commercial manufacturing equipment with moving parts and cutting components. Always follow manufacturer safety guidelines. Wear appropriate PPE including safety glasses and hearing protection during operation. Keep hands clear of forming rollers and cutting mechanisms. Ensure adequate workspace clearance. Professional training is recommended before operating. The machine weighs 1,300 lbs — use appropriate lifting equipment for positioning and transport.
Related Products
Contact GutterAll — Start a Chat for Fastest Response
Sat 9am–12pm PST
Damascus, OR 97089
Start a chat or email sales@gutterall.com for freight quotes to your zip code. Serving Damascus, Portland Metro, Gresham, Happy Valley, Oregon City & Clackamas County locally. Nationwide freight shipping to all 48 states.
