Malco MAX 2000 Left Cut Aviation Snip
Cuts Left | 18 Gauge Steel Capacity | Alloy Steel Blades | Made in USA | Ships Nationwide
The Malco MAX 2000 Left Cut Aviation Snip (Model M2001EV) delivers professional-grade cutting performance for sheet metal up to 18 gauge. Featuring hardened alloy steel blades with serrated lower jaws for solid gripping power, compound handle-to-head linkage for maximum leverage, and all-new molded thermoplastic grips that fit any hand size. The ambidextrous one-hand-operation metal latch and fast-adjusting pivot bolt ensure reliability even after repetitive heavy gauge use. Starting at $54.99. In stock with nationwide shipping available.
+ Local pickup
Product & Pricing
| Model | UPC | Cut Direction | Available | Price |
|---|---|---|---|---|
| M2001EV | 686046532769 | Left Cut | In Stock | $54.99 |
Technical Specifications
| Tool Length | 10 in (254 mm) |
| Length of Cut | 1-3/8 in (34.9 mm) |
| Cutting Capacity | 18 gauge cold rolled steel |
| Blade Material | Hardened alloy steel |
| Lower Jaw | Serrated for solid gripping power |
| Cutting Application | Cuts Left |
| Handle Type | Molded thermoplastic (Red) |
| Latch | Ambidextrous one-hand-operation metal latch |
| Leverage | Compound handle-to-head linkage |
| Weight | 0.90 lbs |
| Brand | Malco (Made in USA) |
| UPC | 686046532769 |
Left Cut vs. Right Cut vs. Straight Cut
| Feature | Left Cut (M2001) | Right Cut (M2002) | Straight Cut (M2003) |
|---|---|---|---|
| Curve Direction | Cuts curves to the left | Cuts curves to the right | Cuts straight lines |
| Handle Color | Red | Green | Yellow |
| Best For | Clockwise circles, left curves | Counter-clockwise circles | Long straight cuts |
| Cutting Capacity | 18 gauge steel | 18 gauge steel | 18 gauge steel |
Common Applications
Cutting sheet metal duct sections, transitions, and fittings for residential and commercial HVAC installations.
Trimming aluminum and galvanized gutter sections, miters, and custom end caps for seamless installations.
Cutting metal roofing panels, drip edge, step flashing, and custom trim pieces for professional roofing work.
General purpose cutting in metal shops, custom fabrication, and automotive bodywork applications.
Material Compatibility
| Material | Gauge Range | Rating |
|---|---|---|
| Cold Rolled Steel | 18-26 gauge | Excellent — rated capacity |
| Galvanized Steel | 18-26 gauge | Excellent — primary use |
| Aluminum | 16-26 gauge | Excellent — gutter work |
| Vinyl & Plastics | Various | Very Good — fast cuts |
| Layered Metal | Multiple thin layers | Good — compound leverage |
| Stainless Steel | 22-26 gauge | Fair — requires more force |
How to Use the Malco MAX 2000 Left Cut Snip
- Mark your cut line on the sheet metal with a marker or scribe.
- Release the one-hand latch by pressing it from the top or side—accessible from either direction.
- Position the snip blades at the edge of the material with the cut line visible.
- For left curves and clockwise circles, keep the waste material to the right of the blades.
- Squeeze the handles firmly—the compound linkage multiplies your hand leverage.
- Make smooth, full strokes rather than short nibbling cuts for cleaner edges.
- Allow the serrated lower jaw to grip the material—do not force the cut.
- Continue cutting along the marked line, keeping the snip at a comfortable angle.
- For tight curves, use shorter strokes and reposition the material as needed.
- Close the latch after use to protect the blades and maintain spring tension.
Safety note: Always wear safety glasses and cut-resistant gloves when cutting sheet metal. Cut edges are sharp. Inspect blades before use and replace if damaged.
Frequently Asked Questions
What is the cutting capacity of the MAX 2000?
The Malco MAX 2000 M2001EV cuts up to 18 gauge cold rolled steel. It also handles aluminum, galvanized steel, vinyl plastics, and layered metals with ease thanks to the compound handle-to-head linkage.
What does "Left Cut" mean?
Left cut snips are designed to cut curves that turn to the left, or to make clockwise circular cuts. The blade geometry allows the waste material to curl away to the right while you cut. Red handles indicate left cut by industry standard.
What makes MAX 2000 different from standard aviation snips?
MAX 2000 snips feature hardened alloy steel blades with precision ground cutting edges for minimal force cuts and maximum service life. The compound linkage multiplies hand leverage, and the narrower grip opening accommodates both large and small hands.
Are the pivot bolt and latch durable?
Yes. The fast-adjusting, long-life pivot bolt holds desired adjustment even after repetitive use in heavy gauge metal. The all-metal latch design will not loosen or hang up with repetitive use, unlike plastic latches found on cheaper snips.
Is this product made in the USA?
Yes. The Malco MAX 2000 M2001EV is manufactured in the United States by Malco Products, SBC, a Minnesota-based company with over 70 years of tool manufacturing experience.
Ordering & Fulfillment
Ships to all 50 states. Most orders ship same or next business day. Free shipping available on qualifying orders.
Contractor pickup available at our location. Call ahead to confirm availability and hours.
Volume pricing available for contractors and distributors. Contact us for quantity discounts on larger orders.
Satisfaction guaranteed. Unused items may be returned within 30 days. Defective tools covered by manufacturer warranty.
