Good!!! 👍🏼👍🏼👍🏼
Just what I needed to replace broken clip on my downspout. Very hard to find this part. It took several google searches and pages to find it.
Good job.
Good timing for shipping to Hi , as promised
GA Midwest Tool Power Cutter Forged Aviation Snips PowerCutter Offset Long Cut Single Item – Professional Tools Hand Tool Sets, Wide Blade
GA Midwest Tool Power Cutter Forged Aviation Snips PowerCutter Offset Long Cut Single Item – Professional Tools Hand Tool Sets, Wide Blade
Quantity
Couldn't load pickup availability
Midwest Power Cutter Offset Aviation Snips
Professional-Grade Forged Steel Snips with Offset Design for Cutting Installed Gutters
Midwest Power Cutter Offset Aviation Snips
$43.50
Key Features for Gutter Installation
- Offset design keeps hands above work surface for cutting installed gutters
- 3-inch cutting length for faster gutter fabrication
- Wider blade opening accommodates thick gutter material
- Forged steel blades for superior durability
- Requires less force, reducing hand fatigue
- Clean, precise cuts prevent leaks and installation issues
- Ergonomic blue rubber handles for comfortable extended use
- Lightweight at 1.06 lb for easy ladder work
✓ Free Shipping
On orders over $50
✓ In Stock
Ships within 24 hours
✓ 30-Day Returns
Hassle-free returns
✓ Local Service
Portland, Oregon based
Why Choose Midwest Power Cutter Offset Snips for Gutter Work?
The Midwest Power Cutter Offset Aviation Snips are specifically designed for professional gutter installers who need to cut gutters that are already mounted on fascia boards. The offset design is the key differentiator - it positions your hands above the cutting blades, allowing you to make clean cuts on installed gutters without your hands interfering with the fascia or roof edge.
Unlike straight-cut snips that require you to work at awkward angles when cutting installed materials, these offset snips let you maintain a natural, comfortable hand position while the blades do the work below. This is especially valuable when you're on a ladder and need both precision and safety.
Offset Design Advantage
The offset configuration means the cutting blades are positioned below the handle plane. When cutting gutters already attached to fascia, this design allows the blades to access the material while your hands stay clear of obstructions. This is critical for:
- Trimming gutters to length after installation
- Cutting notches for inside and outside corners
- Modifying gutters around obstacles like downspout outlets
- Cutting fascia trim and metal flashing
3-Inch Cutting Length
The extended 3-inch cutting length means you can make longer cuts with each squeeze, significantly speeding up gutter fabrication work. Whether you're cutting 5-inch K-style gutters or 6-inch half-round gutters, the longer cutting length reduces the number of cuts needed and creates cleaner, straighter edges.
Wider Blade Opening
The Power Cutter features a wider blade opening compared to standard aviation snips. This wider opening easily accommodates:
- Standard .027" aluminum gutter material
- Thicker .032" commercial-grade gutters
- Multiple layers when cutting gutter guards
- Thick fascia trim and metal flashing
Reduced Cutting Force
The forged steel construction and precision-engineered blade geometry mean these snips require less hand force to make cuts. This is crucial for gutter installers who make hundreds of cuts per day. Less force means:
- Reduced hand and wrist fatigue during long jobs
- Better control and precision on every cut
- Safer operation when working on ladders
- Ability to work longer without discomfort
Technical Specifications
Cutting Length
Up to 3 inches per cut
Blade Material
Forged steel construction
Design Type
Offset (handles above blades)
Blade Opening
Wide opening for thick materials
Handle Type
Ergonomic rubber grip
Weight
1.06 lb (lightweight)
Material Capacity
Cuts aluminum gutter material easily
Cutting Force
Reduced force required
Gutter Installation Applications
Cutting Installed Gutters
The offset design is perfect for trimming gutters to length after they're already mounted on fascia. Your hands stay above the work surface while the blades access the gutter material below, making it easy to cut without interference from the roof edge or fascia board.
Corner Notching
Create clean miters and notches for inside and outside gutter corners. The 3-inch cutting length and precise blade geometry ensure accurate cuts that fit together perfectly, preventing leaks at corner seams.
Downspout Fabrication
Cut and shape downspout material with ease. The wider blade opening accommodates the thickness of downspout material, and the offset design allows you to work comfortably when cutting downspouts that are already attached to walls.
Gutter Guard Trimming
Trim gutter guards and screens to fit perfectly in your gutter system. The wide blade opening handles the thickness of gutter guard material, and the sharp forged blades cut cleanly without crushing or deforming the mesh.
Fascia Trim Work
Cut metal fascia trim and flashing with precision. The offset design is ideal for cutting trim that's already installed, allowing you to make modifications without removing the material from the building.
Outlet Modifications
Cut openings for downspout outlets and end caps. The 3-inch cutting length makes it easy to create the rectangular openings needed for outlet installation, and the clean cuts ensure proper fit and seal.
Built for Oregon's Demanding Weather
Oregon's climate presents unique challenges for gutter systems and the tools used to install them. With an average of 36-43 inches of rainfall annually in the Portland metro area, gutters work harder here than in most parts of the country. The Midwest Power Cutter Offset Snips are built to withstand the demands of working in Oregon's wet conditions.
The forged steel blades resist corrosion even when exposed to moisture during installation. The ergonomic rubber handles provide a secure grip even when wet, which is essential for safe ladder work during Oregon's frequent rainy periods. Many gutter installers in the Portland area work year-round, and these snips are designed to perform reliably in all weather conditions.
Oregon's mix of residential and commercial properties also means gutter installers need tools that can handle various materials and thicknesses. From standard residential .027" aluminum gutters to heavier commercial-grade .032" gutters, the Power Cutter's wide blade opening and reduced cutting force make it versatile enough for any job in the Portland, Beaverton, Hillsboro, or Lake Oswego areas.
What Gutter Professionals Say
"The offset design is a game-changer for cutting gutters that are already installed. I can trim gutters to exact length right on the fascia without my hands hitting the roof edge. These snips have become my go-to tool for modification work on existing gutter systems."
Gutter Installer, Tigard, OR
"I love the wide blade opening on these Power Cutters. When I'm installing gutter guards, I can cut through the thick mesh material in one clean pass. The 3-inch cutting length means I spend less time cutting and more time installing. My hands don't get tired even on full-day jobs."
Gutter Guard Specialist, Oregon City, OR
"These are the best snips I've used for downspout work. The offset design lets me cut downspouts that are already mounted to the wall, which saves me time on modification jobs. The forged steel blades stay sharp even after cutting hundreds of feet of aluminum. Worth every penny."
Gutter Contractor, West Linn, OR
Frequently Asked Questions
Offset snips have handles positioned above the cutting blades, which keeps your hands clear of the work surface. This design is essential for cutting materials that are already installed, like gutters mounted on fascia. Straight-cut snips have handles in line with the blades, which works well for cutting materials on a workbench but can be awkward when cutting installed materials.
These Power Cutter snips are designed primarily for aluminum gutter material (.027" to .032" thickness). While they can handle thin steel materials, they're optimized for aluminum, which is the standard material for residential and commercial gutters. For heavy-gauge steel, we recommend dedicated steel-cutting snips.
Keep the blades clean and dry when not in use. Occasionally apply a drop of light machine oil to the pivot point to ensure smooth operation. Wipe the blades clean after each use, especially if you've been cutting in wet conditions. The forged steel construction is durable, but proper maintenance will extend the life of your snips significantly.
Yes, the offset design and ergonomic handles work well for both right-handed and left-handed users. The symmetrical handle design provides comfortable grip regardless of which hand you use. Many left-handed gutter installers prefer these snips because the offset design doesn't favor one hand over the other.
The 3-inch cutting length means you can make longer cuts with each squeeze of the handles. This speeds up your work significantly - instead of making multiple small cuts, you can cut through gutter material in fewer passes. This creates cleaner, straighter edges and reduces hand fatigue because you're making fewer cutting motions overall.
Yes, we ship throughout Oregon and the entire United States. Orders over $50 qualify for free shipping. We're based in Portland, Oregon, so local customers can expect especially fast delivery. Most orders ship within 24 hours and arrive within 2-5 business days depending on your location.
Serving Portland's Gutter Professionals
GutterAll is your local source for professional gutter installation tools and supplies. Based in Portland, Oregon, we understand the unique demands of gutter work in the Pacific Northwest and stock the tools that local professionals rely on.
Portland, Oregon | (503) 555-RAIN | info@gutterall.com
