Drip edge is REQUIRED by IBC & IRC 2018 building codes, not just recommended. Codes mandate drip edge at eaves and rake edges with specific requirements: vertical leg ≥1.5" width, back extension ≥2", and minimum 2" overlap between sections. Most shingle manufacturers also require drip edge for warranty validity. Skipping drip edge violates code and voids warranties.

Aluminum never rusts or corrodes, while galvanized steel eventually fails when the zinc coating wears off. Aluminum is lighter, easier to install, and won't stain gutters or siding with rust streaks. It's also compatible with aluminum gutters without galvanic corrosion issues. The higher upfront cost pays for itself through decades of maintenance-free performance and no replacement costs.

The 30° bend angle provides optimal water direction away from the fascia while maintaining structural strength. Steeper angles can create water backup, while shallower angles don't direct water effectively. The 30° angle is engineered for maximum performance across all roof pitches and weather conditions, ensuring proper drainage without compromising installation ease.

Match your drip edge to either your roof color (for seamless integration) or gutter color (for coordinated appearance). White works with most light-colored roofs, while brown/bronze complement earth-tone shingles. For modern homes, consider charcoal or pewter gray. We offer 20+ colors including custom matches. Our team can provide color samples and recommendations based on your specific project.

While drip edge installation seems straightforward, it requires working at height with proper safety equipment and precise installation for code compliance. Professional roofers have the experience, tools, and insurance for safe installation. Improper installation can void warranties, fail inspections, and create water damage. We strongly recommend professional installation for safety and performance assurance.

Measure the linear feet of all eaves and rake edges that need protection. Add 10% for waste and overlaps (minimum 2" overlap per joint). A typical single-story home needs 100-200 linear feet, while two-story homes may require 200-400 feet. Our 10-foot sections make calculation easy - divide total footage by 10 and round up. Contact us for a free estimate based on your roof dimensions.

Use aluminum nails or screws to prevent galvanic corrosion. Fasteners must penetrate minimum 3/4" into solid wood. Space fasteners every 10-12 inches, avoiding within 4" of ends. "Hang" the drip edge rather than driving fasteners completely home to allow for thermal expansion. Never use steel fasteners with aluminum - they'll cause corrosion and staining.

Local delivery eliminates shipping damage risk, reduces costs, and provides faster availability. Long aluminum sections are prone to bending during shipping. Local delivery ensures perfect condition arrival and allows for immediate project start. We also provide local technical support and can coordinate delivery timing with your project schedule. Plus, you support local Damascus area business.

Without drip edge, water runs down the fascia causing rot, deck damage, and structural problems. You'll face code violations, failed inspections, voided shingle warranties, and expensive repairs. Insurance may deny water damage claims if code-required drip edge is missing. The small upfront investment in drip edge prevents thousands in future repair costs and ensures code compliance.

Quality aluminum drip edge with baked-on enamel finish lasts 30-50+ years with minimal maintenance. Unlike steel that rusts or vinyl that becomes brittle, aluminum maintains its properties indefinitely. The finish may fade slightly over decades, but the structural integrity remains intact. This makes aluminum drip edge a lifetime investment that outlasts multiple roof replacements.

Yes, we offer custom lengths and color matching for special projects. Custom orders require minimum quantities and longer lead times, but we can accommodate unique specifications. This is particularly valuable for historic renovations, architectural projects, or large developments requiring specific colors. Contact us with your requirements for custom pricing and availability.

We offer 30-day returns on unopened packages in original packaging. For color matching issues, we provide samples before large orders and work with customers to find acceptable solutions. Custom colors are non-returnable unless defective. We recommend ordering samples or single pieces for color verification before bulk purchases. Our goal is complete customer satisfaction with every order.