1-1/2" x 1-1/2" Professional Aluminum Drip Edge Flashing

30° Bend | Code Compliant | 20+ Colors | 10ft Sections

🚨 Professional 30° Bend Drip Edge!

Precision 30-degree bend for optimal water management and roof protection!

20+ colors - Building code compliant!

✨ Key Features:

• 30° Bend Angle: Precision angle for optimal water diversion
• 1-1/2" x 1-1/2" Dimensions: Standard size for most roofing applications
• Premium Aluminum: Lightweight, rust-resistant construction
• 20+ Colors: Wide selection to match any roof color
• Building Code Compliant: Meets local and national building standards
• 10ft Sections: Standard length for efficient installation

📋 Technical Specifications:

🏠 Professional Applications:

📐 Why 30° Bend Matters:

The 30-degree bend angle is engineered for optimal water diversion away from the fascia board. This specific angle ensures water flows smoothly into the gutter while preventing backflow under the roofing material.

🔧 Installation Guide:

1. Measure roof edge and calculate required sections
2. Install drip edge before underlayment on eaves
3. Install drip edge over underlayment on rakes
4. Overlap sections by 2 inches minimum
5. Secure with roofing nails every 12 inches
6. Ensure 30° bend faces away from fascia

⚠️ Safety Notice

Professional installation recommended. Roof work requires proper safety equipment and training. Always use OSHA-approved fall protection. Never work on roofs in wet or windy conditions.

🎯 GutterAll Professional Guarantee

Building code compliant and professional-grade quality guaranteed. This 30° bend aluminum drip edge flashing provides superior water management and roof edge protection.

🏢 Local Damascus OR Delivery

Professional Gutter Installation & Supplies Since 2010