GA 6K Hidden Gutter Hanger with Integrated Screw
Aluminum & Copper Finishes | With or Without Clip | Singles, 100-Packs & 250-Piece Bulk Boxes
The GA 6K Hidden Hanger with Screw is a professional-grade bracket engineered for 6-inch K-style seamless gutter systems. The integrated screw eliminates the need for a separate fastener, speeding up installation while ensuring a secure, concealed mount. Available in corrosion-resistant aluminum or premium copper, with an optional snap-on clip for added holding strength in demanding environments.
Pricing by Variant
Free shipping on orders $500+. Local pickup available Damascus, OR. Call (503) 496-7017 for contractor volume pricing.
Key Features
Integrated Screw Design
Built-in fastener eliminates the separate screw step, reducing install time and ensuring consistent hanger depth across the entire run.
Optional Clip System
Snap-on clip locks the gutter into the hanger for enhanced wind uplift resistance and added security in coastal or high-snow regions.
Hidden Installation
Bracket sits concealed inside the gutter profile, delivering a clean fascia line with no exposed hardware for a finished, professional appearance.
Aluminum & Copper Options
Aluminum provides maximum corrosion resistance and value. Copper develops a natural patina and is preferred for upscale architectural and historic restoration projects.
6-Inch K-Style Compatible
Engineered specifically for 6K seamless and sectional gutter systems — the most common profile on residential and commercial construction nationwide.
Contractor Bulk Packs
100-piece and 250-piece packs reduce per-unit cost for high-volume projects. The 250-box aluminum with-clip at $289.99 works out to $1.16 per hanger.
Technical Specifications
Professional Installation Guide
- Plan hanger layout: Mark hanger locations along the fascia at 24-inch centers (16-inch for heavy snow load regions).
- Set pitch: Snap a chalk line at the correct slope — typically 1/4 inch of drop per 10 feet toward the downspout outlet.
- Pre-drill if needed: For hard or engineered fascia materials, pre-drill pilot holes at each marked location.
- Drive the integrated screw: Position the hanger at the fascia line and drive the built-in screw using a hex-head driver or drill. Do not over-torque.
- Attach optional clip: Where specified, snap the clip into place over the hanger tongue before seating the gutter.
- Seat the gutter: Lower the 6K gutter section into the hanger row, engaging the front lip first, then pressing down the back edge until seated.
- Inspect and verify: Check slope, alignment, and that every hanger is flush and fully engaged before completing downspout connections.
Installation requirements vary by jurisdiction. Consult local building codes and always use OSHA-approved fall protection for work above 6 feet.
Applications & Climate Performance
Residential — Standard
New construction, reroof gutter replacement, and home remodel projects. Aluminum no-clip single or 100-pack recommended.
High-Wind & Coastal
With-clip option recommended. Aluminum resists salt air corrosion. Use 16-inch spacing for added uplift resistance.
Heavy Snow Load
Use with-clip at 16-inch spacing. Integrated screw provides positive mechanical attachment that holds under ice and snow weight.
Luxury & Architectural
Copper with-clip for upscale homes, historic restoration, and premium architectural design. Develops a natural patina over time.
How Many Hangers Do You Need?
Divide gutter run (ft) ÷ 2 = hangers needed
100 ft → 50 hangers
Divide gutter run (ft) ÷ 1.33 = hangers needed
100 ft → 75 hangers
- Single → repairs & samples
- 100-Pack → ~200 ft at 24″
- 250-Box → ~500 ft at 24″
Add 10–15% to your calculated count for corners, end adjustments, and any rejects during installation.
Why Choose GutterAll
Quality Assurance
Every GA hanger is inspected for dimensional accuracy, material thickness, and finish consistency before packaging. Defective units are replaced at no charge.
Contractor Pricing
Volume discounts available for orders above 500 units. Contact (503) 496-7017 or sales@gutterall.com for contractor account setup.
Fast Shipping
Most in-stock orders ship within 1–2 business days. Free shipping on orders over $500. Local pickup available same day at our Damascus, OR location.
Expert Support
Our team has hands-on gutter installation experience. Call or text (503) 496-7017 Mon–Fri 8am–4pm PT with questions about material selection or sizing.
Complete Your 6-Inch K-Style Gutter System
- 6-Inch K-Style Seamless Aluminum Gutters — Available in 25+ colors for new installations and replacements
- 6K Hidden Gutter Hangers (No Screw) — Alternative hidden hanger when screw is supplied separately
- 6K No Screw No Clip Hangers — Quick-install option for high-volume production crews
- #10-12 x 1.5″ Hex Washer Head Screws — Compatible fasteners for use with no-screw hanger variants
- 5-Inch K-Style Gutters & 5K Hangers — Complete 5-inch system components for smaller residential profiles
Customer Reviews
★★★★★"Installed 300 of these on a commercial project. The integrated screw makes alignment dead simple compared to separate fasteners. Clips added real peace of mind on the windward side of the building."
★★★★★"Ordered the 100-pack aluminum no-clip for a standard ranch home. Pricing per hanger is excellent and the quality is exactly what I expected from GutterAll. Fast shipping too."
★★★★★"Used the copper with-clip singles on a luxury home renovation. The copper looks incredible and the hidden installation gives a completely clean fascia line. Worth every penny for a premium project."
Frequently Asked Questions
Should I choose aluminum or copper?
Choose aluminum for most residential and commercial projects — it offers excellent corrosion resistance, a clean silver finish, and the best value. Choose copper for premium architectural applications where a natural patina and upscale appearance are priorities. Copper singles are $9.99; 100-packs are $879.99.
Do I need the clip or is the integrated screw enough?
The integrated screw provides strong, reliable support for most standard installations. Add the optional clip for high-wind coastal areas, heavy snow load regions, or commercial projects where local codes require enhanced gutter attachment.
How many hangers do I need?
Divide your total gutter run in feet by your spacing in feet. At 24-inch spacing: 100 feet of gutter requires approximately 50 hangers. Add 10–15% for corners and adjustments. The 100-piece pack covers roughly 200 feet at standard spacing; the 250-piece box covers approximately 500 feet.
Is local pickup available?
Yes. Local pickup is available at 19759 SE Sunnyside Rd, Damascus, OR 97089, Monday–Friday 8am–4pm Pacific Time. Call (503) 496-7017 ahead to confirm stock on your specific variant.
What screw size does the GA 6K integrated hanger use?
The GA 6K Hidden Hanger uses a #10 x 2-inch self-drilling hex-head screw integrated into the hanger body. No separate fastener is required. Drive with a 5/16-inch hex driver at moderate torque — do not over-torque as this can strip the fascia and reduce holding strength.
Can these hangers be used with sectional gutters or only seamless?
The GA 6K Hidden Hanger works with both seamless and sectional 6-inch K-style gutters. For sectional gutters, position hangers so they do not fall directly on a joint — offset by at least 2 inches from any gutter seam to maintain a secure connection.
