Wooster LockJaw Tool Holder | 160° Multi-Angle Grip

Reach Awkward Gutter and Fascia Areas Without Fighting the Tool Angle

Some jobs are not hard because the tool is wrong. They are hard because the tool is pointed the wrong way. The LockJaw gives compatible handled tools a secure angle on an extension pole, making it easier to work around gutter fronts, fascia edges, trim boards, roofline details, high walls, and inspection spots.

The main buying reason is simple: grip the tool, set the angle, lock it in place, and work with better reach control instead of constantly repositioning by hand.

Made for More Than Paint Work

The Wooster LockJaw is commonly used with handled tools such as paintbrushes, roller frames, scrapers, and flashlights. For gutter work, that same grip-and-angle function can help with inspection lights, brushes, scrapers, marking tools, cleaning tools, and other compatible hand tools that fit within the jaw limit.

Use it when the job needs controlled reach, not guesswork at the end of a pole.

Fit Check Before Ordering

The LockJaw is designed to hold compatible handled tools up to 1-3/8 in diameter. It works with threaded extension poles and Wooster Sherlock GT poles.

It is not a fall-protection device, not a tie-off point, and not intended for heavy powered tools. Check tool fit and locking engagement before raising it overhead.

Built for Reach, Control, and Faster Tool Positioning

Why This Tool Belongs in a Gutter Work Kit

Gutter work often happens in cramped, angled, overhead, or hard-to-reach areas. A scraper, inspection light, marking crayon holder, brush, or small compatible tool can be more useful when it can be locked to an extension pole at the right angle.

The LockJaw helps with that exact problem: it gives a non-threaded or awkwardly angled compatible tool a better way to work from a pole.

For installers, cleaners, maintenance crews, painters, and exterior repair pros, that means fewer awkward reach attempts and better control over the tool face.

How to Use It

1. Choose a compatible handled tool with a handle diameter up to 1-3/8 in.
2. Open the LockJaw and center the tool handle in the jaw.
3. Close the jaw firmly so the tool is held securely.
4. Set the working angle using one of the locking positions.
5. Attach the holder to a threaded extension pole or Wooster Sherlock GT pole.
6. Test the grip and angle before raising the tool overhead or using it near gutters, fascia, siding, or trim.
7. Clean the grip area after dusty, wet, or debris-heavy work so the mechanism stays easier to use.

Best-Fit Applications

LockJaw Tool Holder vs Holding Tools by Hand

Key Features

Quick Product Summary

Wooster LockJaw Tool Holder for compatible handled tools up to 1-3/8 in diameter. Locks in 9 positions across a 160° range and works with threaded or Wooster Sherlock GT extension poles. Useful for scrapers, brushes, roller frames, flashlights, inspection tools, and other compatible non-powered tools used in gutter work, exterior cleaning, fascia prep, trim touch-up, and maintenance tasks.

Key Benefits

• Helps angle compatible tools for gutter, fascia, trim, and exterior reach work
• Locks into 9 positions across a 160° working range
• Holds compatible handled tools up to 1-3/8 in diameter
• Works with threaded extension poles
• Works with Wooster Sherlock GT extension poles
• Useful with compatible scrapers, brushes, small rollers, flashlights, and inspection tools
• Helps reduce awkward wrist angles during certain reach tasks
• Helps keep the tool face better positioned against the work surface
• Useful for gutter cleaning, prep, inspection, and exterior maintenance
• Good fit for painters, gutter crews, handymen, maintenance teams, and DIY buyers
• Durable engineered plastic construction for repeated tool use
• Compact accessory that stores easily in a tool bag, truck, or shop kit
• Helps make non-threaded compatible tools more useful on extension poles
• Practical for exterior work where a fixed angle matters
• Available with fit support from GutterAll before ordering

Product Specifications

Who Uses the Wooster LockJaw?

Use and Safety Notice

Always confirm the tool handle fits securely before raising it overhead. Test the jaw grip, angle lock, and pole connection at ground level first.

Do not use this holder as a fall-protection device, tool tether, lifting point, or attachment for heavy powered tools.

Use stable ladder practices, safe extension pole handling, eye protection, gloves, and proper fall protection when working near rooflines, gutters, fascia, siding, or elevated areas.

Need Help Matching It to Your Pole or Tool?

The right setup depends on pole type, tool-handle diameter, working angle, and the task. Check availability and confirm fit before adding it to a gutter, painting, cleaning, or exterior maintenance kit.

Product Summary Box

Wooster LockJaw Tool Holder for compatible handled tools up to 1-3/8 in diameter. Locks in 9 positions across a 160° adjustment range and works with threaded or Wooster Sherlock GT extension poles. A practical reach accessory for gutter prep, gutter cleaning, exterior inspection, fascia work, trim touch-up, scraping, brushing, painting, and maintenance tasks.