IVY Classic 1/4 in x 6 in Magnetic Nut Setter 5 Pc
IVY Classic 1/4 in x 6 in Magnetic Nut Setter 5 Pc
Couldn't load pickup availability
1/4 in Socket | 6 in Reach | Magnetic Hold | Impact Rated | Chrome Vanadium Steel | 5-Pack
IVY Classic 1/4 in x 6 in Magnetic Nut Setter 5 Pc
Keep 1/4 in hex-head fasteners under control when you are driving gutter screws, downspout straps, roofing fasteners, brackets, clips, and sheet-metal hardware. This 6 in magnetic nut setter gives installers extra reach, stronger fastener hold, and impact-driver compatibility when the job calls for speed without sloppy screw starts.
Dropped Screws, Stripped Corners, and Short Bits Waste Time Fast
| Jobsite Problem | What It Can Cost | Product Advantage |
|---|---|---|
| Fasteners fall off the driver | Dropped screws, ladder frustration, slower installs, and repeated starts | Magnetic retention helps hold 1/4 in hex-head fasteners in place before driving. |
| Short nut setters cannot reach cleanly | Awkward angles, damaged finishes, poor engagement, and extra hand repositioning | 6 in reach helps access fasteners around gutters, downspout straps, brackets, trim, and tight exterior details. |
| Hex-head corners get rounded | Stripped fasteners, ugly hardware, removal headaches, and wasted time | Lobular design drives fasteners on the flats instead of the corners to help reduce corner stripping. |
| Only one driver bit on the truck | A lost, worn, or misplaced bit can slow the whole crew down | 5-pack keeps backup nut setters ready for tool bags, trucks, installers, and repair kits. |
Why Gutter Crews Keep 1/4 in Magnetic Nut Setters Ready
Better Fastener Control
The magnet helps hold 1/4 in hex-head screws while you line up downspout straps, gutter accessories, roofing fasteners, clips, and brackets.
6 in Reach
Longer reach helps access fasteners around gutter edges, trim returns, downspout runs, and awkward hardware locations where stubby drivers fight you.
Lobular Grip Design
The socket profile is designed to drive fasteners on the flat sides, helping reduce corner rounding when the bit is properly seated.
Crew-Friendly 5-Pack
Stock multiple trucks, give each installer a backup, or keep extras on hand for repair work without stopping the job over one missing bit.
Product Snapshot
| Product Detail | Specification | Why It Matters |
|---|---|---|
| Product Type | Magnetic hex nut setter / impact driver nut driver bit | Drives compatible hex-head fasteners used in gutter, roofing, downspout, and sheet-metal work. |
| Size | 1/4 in socket | Matches common 1/4 in hex-head screws and fasteners when properly verified. |
| Length | 6 in | Adds reach for gutter, roofing, bracket, strap, and exterior fastening tasks. |
| Pack Quantity | 5 pieces | Supports multiple tool bags, crews, service trucks, and backup inventory. |
| Best Gutter Uses | Gutter screws, downspout straps, roofing fasteners, clips, brackets, trim screws, sheet-metal work, and service repairs | Helps installers drive compatible fasteners with better control and fewer dropped screws. |
Product Details
| Product Detail | Specification | Installer Benefit |
|---|---|---|
| Brand | IVY Classic | Recognizable driver-bit and tool-accessory brand for contractor use. |
| Model | 45490 | Helps confirm the exact 1/4 in x 6 in magnetic nut setter 5-pack. |
| Socket Size | 1/4 in | Fits compatible 1/4 in hex-head fasteners used in gutter, roofing, and sheet-metal applications. |
| Length | 6 in | Gives better reach than short nut setters when working around gutters, trim, straps, and tight locations. |
| Shank | 1/4 in power hex shank | Fits compatible impact drivers, drill/drivers, and quick-change chucks. |
| Retention | Magnetic | Helps hold fasteners while positioning screws overhead, on ladders, or around exterior trim. |
| Magnet Support | Extra-strength magnet secured with splined brass bushing | Supports stronger fastener retention and a more durable magnetic hold. |
| Socket Design | Lobular design | Helps reduce corner stripping by driving fasteners on their flat sides. |
| Material | Chrome vanadium steel | Built for durability in repeated fastening tasks when used correctly. |
| Tool Rating | Impact-rated | Designed for use with impact drivers when the fastener, torque, and application are appropriate. |
| Quantity | 5-pack | Keeps extras ready for crews, service trucks, replacements, and high-use jobs. |
| Barcode | 738226446608 | Useful for accurate reorder and product matching. |
Gutter Installation Applications
| Application | Why This Nut Setter Helps | Pre-Use Check |
|---|---|---|
| Gutter screw fastening | Helps drive compatible 1/4 in hex-head screws with better engagement and control. | Confirm screw head size, torque setting, and that the bit is fully seated before driving. |
| Downspout straps and brackets | 6 in reach helps position screws around downspout runs, straps, clips, and exterior surfaces. | Confirm substrate, strap location, fastener length, and what is behind the drilling/fastening point. |
| Roofing and sheet-metal fasteners | Magnetic hold helps keep compatible fasteners on the bit while aligning sheet-metal connections. | Confirm fastener head size, sealing washer requirements, torque, and material compatibility. |
| Repair truck stock | 5-pack gives crews spares for multiple trucks, tool belts, and high-turnover repair work. | Replace worn, rounded, cracked, or magnet-weakened nut setters before they damage fasteners. |
| Tight exterior fastening points | Longer shaft improves access where short nut setters cannot reach cleanly. | Keep the bit aligned with the fastener to avoid rounding, wobble, or surface damage. |
How the Nut Setter Helps Drive Cleaner Fasteners
| Step | What Happens | Why It Matters |
|---|---|---|
| 1. Hold | The magnet helps hold the fastener inside the nut setter. | Better hold reduces dropped fasteners and repeated starts. |
| 2. Reach | The 6 in shaft helps reach fasteners around gutters, straps, trim, and brackets. | More reach can improve tool angle and reduce awkward hand placement. |
| 3. Engage | The lobular socket profile engages the fastener flats. | Driving on the flats helps reduce corner stripping when the bit is seated properly. |
| 4. Drive | The 1/4 in power hex shank works with compatible impact drivers and drill/drivers. | Crews can drive compatible fasteners with a familiar quick-change tool setup. |
Choose the Right Driver Setup
This Product: 1/4 in x 6 in Magnetic Nut Setter
Best for compatible 1/4 in hex-head fasteners where magnetic hold and 6 in reach make installation easier.
Short Nut Setters
Better when access is wide open and extra reach is not needed.
Different Socket Sizes
Required when the fastener head is not 1/4 in. Match the nut setter to the fastener, not the other way around.
Key Benefits
| Benefit | Plain-English Value |
|---|---|
| 1/4 in socket size | Fits compatible 1/4 in hex-head fasteners commonly used in gutter, roofing, and sheet-metal work. |
| 6 in length | Adds reach around gutters, brackets, downspout straps, trim, and tight fastening points. |
| Magnetic retention | Helps hold screws in place before driving, especially on ladders and overhead work. |
| Lobular socket design | Drives on fastener flats to help reduce corner stripping. |
| Chrome vanadium steel | Built for repeated fastening tasks when used with proper engagement and torque. |
| Impact-rated use | Designed for compatible impact-driver applications. |
| 1/4 in power hex shank | Fits common quick-change impact driver and drill/driver setups. |
| 5-pack quantity | Keeps backups ready for multiple installers, trucks, and service kits. |
| Gutter crew friendly | Useful for downspout straps, gutter accessories, brackets, fasteners, clips, and exterior repairs. |
| Cleaner workflow | Less fighting the fastener means faster, cleaner fastening and fewer dropped screws. |
Product Specifications
| Specification | Details |
|---|---|
| Product Name | IVY Classic 1/4 in x 6 in Magnetic Nut Setter 5 Pc |
| Product Type | Magnetic hex nut setter / impact driver nut setter / hex-head screw driver bit |
| Brand | IVY Classic |
| Model | 45490 |
| Socket Size | 1/4 in |
| Length | 6 in |
| Shank | 1/4 in power hex shank |
| Retention Type | Magnetic |
| Magnet Detail | Extra-strength magnet secured with splined brass bushing |
| Socket Design | Lobular design for driving fasteners on the flats |
| Material | Chrome vanadium steel |
| Tool Rating | Impact rated |
| Quantity | 5 pieces |
| Barcode | 738226446608 |
| Listed Weight | 1 lb |
| Primary Gutter Uses | Driving compatible 1/4 in hex-head gutter screws, roofing fasteners, downspout strap screws, clips, brackets, trim fasteners, and sheet-metal hardware |
| Common Accessories | Impact driver, drill/driver, compatible 1/4 in hex-head screws, downspout straps, gutter accessories, PPE, and replacement fasteners |
| Confirm Before Use | Fastener head size, tool fit, bit seating, torque setting, substrate, washer requirements, ladder position, and PPE |
| Not Intended For | Non-1/4 in fastener heads, rounded or damaged fasteners, sockets requiring deep mechanical retention, hand sockets, structural torque verification, or applications requiring a different driver size |
| Expected Service Life | Varies by torque, fastener fit, tool alignment, impact use, material condition, and installation technique. |
Who Uses This Magnetic Nut Setter?
Gutter Installers
For driving compatible 1/4 in hex-head gutter screws, downspout strap screws, clips, brackets, roofing fasteners, and sheet-metal hardware.
Repair and Service Crews
For truck stock, fastener replacement, loose downspout straps, exterior repair calls, and field work where reach and magnetic hold save time.
Roofing, Sheet-Metal, Maintenance, and Capable DIY Buyers
For compatible 1/4 in hex-head fasteners where the buyer can confirm driver size, fastener fit, torque, material, and safe use before ordering.
Setup and Use Guide
| Step | Action | Why It Matters |
|---|---|---|
| 1 | Confirm the fastener has a 1/4 in hex head. | Wrong size drivers round fasteners and damage the nut setter. |
| 2 | Inspect the fastener and nut setter before use. | Damaged fasteners or worn bits can slip, strip, or wobble. |
| 3 | Seat the 1/4 in power hex shank fully in the chuck. | Proper seating reduces wobble and helps transfer torque cleanly. |
| 4 | Place the compatible screw into the magnetic socket. | Magnetic hold helps position the fastener without fighting gravity. |
| 5 | Keep the bit square to the fastener. | Straight alignment helps prevent stripping, wobble, and surface damage. |
| 6 | Use controlled pressure and appropriate torque. | Overdriving can damage fasteners, washers, finishes, and substrates. |
| 7 | Stop once the fastener is seated correctly. | Proper seating helps avoid crushed washers, stripped heads, and distorted materials. |
| 8 | Check the connection after fastening. | A quick inspection catches loose, crooked, or overdriven screws. |
| 9 | Replace worn or damaged nut setters. | A worn socket can round fasteners and slow the crew down. |
| 10 | Store backups in tool bags, trucks, or repair kits. | The 5-pack keeps replacements close when a bit is lost, worn, or loaned into the void. |
Pro Tip
Magnetic hold helps, but alignment still matters. Keep the nut setter square to the fastener, let the lobular socket engage the flats, and avoid using impact torque like you are trying to win an argument with the screw.
Frequently Asked Questions
| Question | Answer |
|---|---|
| What is this magnetic nut setter used for? | It is used to drive compatible 1/4 in hex-head screws and fasteners with an impact driver or drill/driver. For gutter work, it is useful for gutter screws, downspout straps, roofing fasteners, brackets, clips, and sheet-metal hardware. |
| Will this fit an impact driver? | Yes. It has a 1/4 in power hex shank and is impact rated. Use appropriate torque and confirm the fastener is compatible before driving. |
| What does the magnet do? | The magnet helps retain compatible fasteners in the socket so installers can position screws more easily before driving, especially on ladders or overhead work. |
| What does lobular design mean? | The lobular socket design drives fasteners on their flat sides instead of their corners, helping reduce corner stripping when the bit is properly seated. |
| Why choose a 6 in nut setter? | The 6 in length gives extra reach around gutters, downspout straps, trim, brackets, and tight exterior fastening points where shorter bits may be awkward. |
| What is GutterAll's return policy for this product? | GutterAll offers a 30-day return window for unused standard products in original condition. Opened, used, worn, rounded, cracked, damaged, customer-damaged, or incorrectly selected nut setters may not be returnable unless defective. Confirm size, length, shank, application, and quantity before ordering. |
| What fulfillment options are available? | This compact tool accessory can ship when available through Shopify checkout. Local pickup and local delivery may also be available through GutterAll in Damascus, Oregon. Confirm current fulfillment options at checkout. |
Fastening and Safety Notice
Fastening with impact tools may involve torque reaction, slipping bits, flying fasteners, ladder work, overhead work, sharp metal, and surface damage risk. Use eye protection, gloves where appropriate, ladder safety, and jobsite PPE.
Confirm the fastener head is 1/4 in, the nut setter is fully seated, the fastener is not rounded, and the torque setting is appropriate for the material. Do not force damaged fasteners.
Do not use this nut setter as a hand socket, pry tool, structural torque-verification tool, or driver for non-matching fastener heads.
Need Help Matching the Nut Setter to the Fastener?
The right driver depends on fastener head size, tool fit, reach, torque setting, washer type, substrate, and access angle. Website chat is the fastest way to confirm fit before checkout.
Fastest Path
Start with website chat for fastener size, nut setter length, tool fit, pickup, local delivery, or shipping questions.
Complete the Setup
Pair with compatible gutter screws, roofing fasteners, downspout straps, clips, brackets, impact drivers, PPE, and replacement fasteners.
Avoid Fit Mistakes
Do not assume every hex-head fastener is 1/4 in. Confirm the fastener head before driving.
Product Summary Box
The IVY Classic 45490 1/4 in x 6 in Magnetic Nut Setter 5-Pack is an impact-rated driver accessory for compatible 1/4 in hex-head fasteners used in gutter, roofing, downspout, bracket, clip, and sheet-metal applications. It features a 1/4 in socket, 6 in length, 1/4 in power hex shank, magnetic retention, chrome vanadium steel construction, and lobular socket design that drives fasteners on the flats to help reduce corner stripping. Use it when fastener size, tool fit, torque, substrate, and safe working conditions are confirmed.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
