1.5 x 1.5 Aluminum Drip Edge 30° Bend - Sold by Foot
1.5 x 1.5 Aluminum Drip Edge 30° Bend - Sold by Foot
Couldn't load pickup availability
1.5 x 1.5 Aluminum Drip Edge | 30° Bend | 20+ Colors | Sold by Foot | 8 ft Max Ship Length
1.5 x 1.5 Aluminum Drip Edge 30° Bend - Sold by Foot
Give compact roof edges a cleaner water break before the gutter line starts doing the heavy lifting. This aluminum drip edge uses a 30° bend, a compact 1.5 x 1.5 profile, and 20+ color options for sharp-looking roof-edge, fascia, and gutter transition work.
Clear Pricing and Sizing
This aluminum drip edge is priced and sold by the foot. Enter the total number of linear feet needed for the roof edge, gutter run, repair section, eave, rake, fascia transition, or compact roofline detail. Quantity 12 equals 12 total linear feet.
Shipped pieces are limited to 8 ft maximum length. Long formed metal is expensive to package and more likely to bend during transit, so shipped orders are cut into pieces no longer than 8 ft.
Need longer pieces? Longer lengths may be available for in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.
A 30° Bend That Helps Create a Cleaner Roof-to-Gutter Transition
The 30° bend is the key profile detail here. It gives the drip edge a formed break that helps create separation at the roof edge, so compatible installations can guide runoff toward the gutter path instead of leaving the fascia edge looking unfinished or improvised.
Best fit: compact eave flashing, rake flashing, roof-edge flashing, gutter-edge flashing, fascia-side coverage, gutter replacement prep, exterior repair runs, and projects that need a small aluminum drip edge with a defined 30° bend.
Do Not Let a Small Roof Edge Turn Into an Expensive Fascia Mess
A clean gutter install can still look wrong if the roof edge above it is short, exposed, or poorly finished. This 1.5 x 1.5 aluminum drip edge gives installers a compact edge-metal option for jobs where a larger profile is not the right fit.
The result is a cleaner transition, better-looking edge detail, and a more intentional finish at the exact place customers notice when they look up.
Aluminum Construction with 20+ Color Options
The aluminum construction gives contractors a lightweight formed metal profile for exterior roof-edge and gutter-adjacent work. The 20+ color selection helps coordinate the flashing with gutters, fascia, trim, siding, roof accents, and exterior color schemes.
Confirm color, piece length, roof-edge fit, fastener method, and surrounding material compatibility before ordering.
Order by Total Feet, Not by Piece Count
This item is priced and ordered by linear foot. If the project needs 24 total feet, order 24. If the order ships, it may arrive as three 8 ft pieces or another cut combination that does not exceed the 8 ft shipping length limit.
For local pickup or local delivery, ask about available longer cuts before ordering.
Key Benefits at a Glance
30° Bend Profile
Creates a defined formed break for compact roof-edge and gutter transition work.
Compact 1.5 x 1.5 Fit
Works for smaller roof-edge details where a wider 3 in, 4 in, or 5 in roof leg is not required.
Color-Matched Finish Options
20+ colors help coordinate with gutters, fascia, trim, siding, and roof accents.
Ships up to 8 ft
Shipped pieces are limited to 8 ft or less to control long-item shipping cost and damage risk.
Profile Details
| Profile Area | Measurement | Why It Matters |
|---|---|---|
| Roof leg | 1.5 in | Works for compact roof-edge details where a wider roof leg is not required. |
| Face / drop | 1.5 in | Creates compact fascia-side coverage for smaller roof-edge and gutter-adjacent transitions. |
| Bend angle | 30° bend | Creates the defined drip edge break that separates this profile from flat trim metal. |
| Material | Aluminum | Gives installers a lightweight formed flashing profile for exterior roof-edge work. |
| Color options | 20+ colors | Helps match gutters, fascia, siding, trim, and roof accents. |
Pricing and Length Guide
| How It Works | What to Expect |
|---|---|
| Sold by foot | Quantity equals total linear feet ordered. |
| Shipping length | Maximum shipped piece length is 8 ft. |
| Local pickup | Longer pieces may be available for pickup at the Damascus, Oregon location. |
| Local delivery | Longer pieces may be available for local delivery depending on order size and route. |
| Example order | Order 20 ft and shipped pieces may be cut as 8 ft + 8 ft + 4 ft. |
Best-Fit Applications
| Application | Why It Fits |
|---|---|
| Compact roof-edge finishing | The 1.5 x 1.5 profile works for smaller eave and rake details where a larger roof leg is not required. |
| Gutter installation prep | Useful when the gutter install also needs a clean roof-edge transition before the gutter line is finished. |
| Fascia-side coverage | The 1.5 in face creates a compact vertical edge for smaller fascia-side details. |
| Color-matched exterior work | 20+ colors help coordinate with gutters, fascia, trim, siding, and roof accents. |
| Repair and replacement runs | Sold-by-foot ordering helps match the material quantity to measured job sections. |
1.5 x 1.5 Aluminum Drip Edge 30° Bend vs Wider Profiles
| 1.5 x 1.5 Aluminum Drip Edge 30° Bend | Wider Drip Edge Profiles |
|---|---|
| Compact 1.5 in roof leg for smaller compatible roof-edge details. | 3 in, 4 in, or 5 in roof legs may be better when broader roof-side coverage is needed. |
| 30° bend creates a defined drip edge break. | Other profiles may use different bend geometry, hems, taller faces, or wider roof legs. |
| Aluminum construction for lightweight handling. | Other profiles may use steel, copper, or other material depending on the project requirement. |
| Sold by foot for measured job planning. | May also be sold by foot, piece, or fixed-length section depending on item. |
Key Features
| Feature | Customer Benefit |
|---|---|
| 30° bend | Creates a defined roof-edge break for compact drip edge and gutter transition work. |
| Sold by foot | Order the total footage needed for the project. |
| 8 ft maximum shipped length | Keeps shipped flashing pieces within a more practical long-item shipping size. |
| 1.5 x 1.5 profile | Works for compact roof-edge details that do not need a wider profile. |
| Aluminum construction | Provides a lightweight formed flashing profile for exterior roof-edge work. |
| 20+ colors | Helps coordinate with gutters, fascia, trim, siding, and exterior finishes. |
Quick Product Summary
1.5 x 1.5 Aluminum Drip Edge 30° Bend for compact eave, rake, roof-edge, fascia, gutter-adjacent, and exterior transition work. This aluminum profile includes a 30° bend, 20+ color options, and sold-by-foot ordering for measured project runs. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Key Benefits
- 30° bend creates a defined drip edge break for compact roof-edge work
- Sold by foot for cleaner project quantity planning
- Shipped pieces limited to 8 ft for practical long-item delivery
- Longer pieces may be available for pickup or local delivery
- Compact 1.5 x 1.5 profile for smaller roof-edge details where compatible
- Aluminum construction for lightweight handling
- 20+ colors help match gutters, fascia, trim, siding, and roof accents
- Useful for eave, rake, roof-edge, fascia, gutter-adjacent, and trim transition details
- Helps guide roof runoff toward the gutter path when installed correctly
- Good option for gutter installers, roofers, remodelers, and exterior crews
- Helps create a cleaner finished appearance than improvised flat metal
- Practical for repair work, replacement work, and new exterior installations
- Makes quantity planning easier for measured roof-edge and fascia runs
- Works with compatible fasteners, sealants, roofing materials, and flashing methods
- Available from GutterAll in Damascus, Oregon
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 1.5 x 1.5 Aluminum Drip Edge 30° Bend - Sold by Foot |
| Product Type | Aluminum drip edge flashing, roof-edge flashing, gutter-edge flashing, fascia flashing, eave flashing, rake flashing |
| Profile Size | 1.5 x 1.5 nominal profile |
| Roof Leg | 1.5 in |
| Face / Drop | 1.5 in |
| Bend Angle | 30° bend |
| Material | Aluminum |
| Color Options | 20+ colors available; confirm current color options before ordering. |
| Sold As | Per linear foot |
| Pricing Basis | Quantity equals total linear feet selected in the purchase area. |
| Full Section Reference | 10 ft section reference; shipped pieces are limited to 8 ft or shorter. |
| Shipping Length Limit | Maximum 8 ft per shipped piece |
| Longer Pieces | Ask about longer pieces for pickup or local delivery before ordering. |
| Primary Uses | Compact roof-edge details, eave flashing, rake flashing, fascia protection, gutter-adjacent transitions, repair runs, and exterior water-control details |
| Best Fit | Projects needing a compact 1.5 x 1.5 aluminum drip edge with a 30° bend |
| Common Accessories | Compatible fasteners, sealant, snips, roof safety gear, underlayment, roofing materials, gutter components, and fascia repair materials as needed |
| Confirm Before Use | Roof-edge assembly, gutter position, fascia condition, overlap direction, fastening method, roof safety plan, color match, and whether a different flashing profile is required |
| Not Intended For | Applications requiring gutter apron, wall step flashing, metal roof-specific flashing, tile roof flashing, structural support, or installation that conflicts with local requirements or manufacturer instructions |
| Expected Service Life | Varies by finish condition, climate exposure, installation quality, cut edges, fastener choice, sealant use, drainage conditions, maintenance, and compatibility with surrounding materials. |
Who Uses This 30° Bend Aluminum Drip Edge?
Gutter Installers and Exterior Crews
- Preparing compact roof-edge details before or during gutter installation
- Using a 30° bend profile where a clean edge break is needed above the gutter line
- Ordering exact footage for repair, replacement, and project runs
Roofers, Remodelers, and Builders
- Using a compact aluminum drip edge profile for compatible roof-edge layouts
- Choosing from 20+ colors where exterior finish coordination matters
- Planning order footage around eaves, rakes, fascia runs, and repair sections
Experienced DIY Buyers
- Replacing compatible roof-edge flashing near gutter and fascia details
- Ordering smaller project quantities by the foot
- Using 8 ft or shorter shipped pieces for manageable handling
Setup and Planning Guide
- Measure the total eave, rake, roof-edge, fascia, repair, or gutter-adjacent transition footage needed.
- Order the total number of linear feet required.
- For shipped orders, plan around an 8 ft maximum piece length.
- For pickup or local delivery, ask about available longer pieces before ordering.
- Confirm the selected color works with the gutter, fascia, roof, siding, and trim.
- Confirm whether the 1.5 x 1.5 profile and 30° bend fit the actual roof-edge detail.
- Use proper flashing sequence, overlap direction, drainage clearance, and compatible surrounding materials.
- Use compatible fasteners and sealants for the roofing and gutter system.
- Check fit and water path before fastening the full run.
- Verify runoff is directed outward and toward the gutter path without running behind the fascia.
Installation and Ordering Notice
This flashing is sold per linear foot. Shipped pieces are limited to 8 ft maximum length because long formed metal is costly to ship and more likely to bend or damage during transit.
For longer pieces, use pickup or ask about local delivery availability before ordering.
Use proper flashing sequence, overlap, drainage clearance, compatible fasteners, and sealant practices for the roof and gutter system being worked on.
Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height. Cut metal can be sharp.
Need Help Planning Footage, Color, or Cut Lengths?
Use website chat for help planning total footage, shipped cut lengths, pickup options, local delivery availability, and whether this 1.5 x 1.5 aluminum drip edge with 30° bend is the right fit for the roof-edge detail.
Order by Footage
Quantity equals total linear feet needed for the project.
Ships up to 8 ft
Shipped pieces are cut to 8 ft or less for practical delivery.
Ask About Longer Pieces
Longer pieces may be available for pickup or local delivery.
Product Summary Box
1.5 x 1.5 Aluminum Drip Edge 30° Bend for compact eave, rake, roof-edge, fascia, gutter-adjacent, and exterior transition work. This aluminum profile includes a 30° bend, 20+ color options, and sold-by-foot ordering for measured project runs. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Frequently Asked Questions
What is 1.5 x 1.5 aluminum drip edge with a 30° bend used for?
It is used for compatible compact eave, rake, roof-edge, fascia, and gutter-adjacent details where an aluminum drip edge profile with a 30° bend fits the project.
How is this flashing priced and sized?
It is sold by the foot. The purchase quantity should match the total linear feet needed for the project. The profile is 1.5 x 1.5 nominal size with a 30° bend.
Can pieces longer than 8 ft be shipped?
No. Shipped pieces are limited to 8 ft because long formed metal is costly to package and more likely to bend during transit. Longer pieces should be arranged through pickup or local delivery where available.
Is this the same as gutter apron?
No. This is aluminum drip edge flashing. Gutter apron is a different roof-edge profile and may be better for certain roof-to-gutter details.
What is GutterAll's return policy for this product?
GutterAll offers a 30-day return window for unused standard products in original condition. Cut, bent, scratched, installed, altered, custom-length, custom-color, or customer-damaged flashing may not be returnable unless defective. Customers should confirm footage, piece length, color, profile, pickup, delivery, and shipping limits before ordering. Return shipping or return transport is the buyer's responsibility unless the return is due to defect or fulfillment error. Refunds are processed within 5 to 7 business days after approval and receipt.
What fulfillment options are available?
In-store pickup at GutterAll in Damascus, Oregon, local delivery where available, and shipping are available depending on selected piece length. Shipped pieces are limited to 8 ft. Typical small-order handling is 1 to 2 business days, and transit time is typically 3 to 7 business days depending on destination and carrier.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
