1.5 x 1.5 T-Metal Flashing 26ga - Sold by Foot

Clear Ordering Note: Sold by Foot, Shipping Length Limited to 8 ft

This T-metal flashing is priced and sold by the foot. Order the total linear footage needed for the roof-wall transition, trim run, fascia detail, sidewall repair, or gutter-adjacent water-control area.

• Sold by foot: the purchase quantity should equal the total linear feet needed.
• Maximum shipped piece length: 8 ft per piece because long metal is costly to package and ship safely.
• Need pieces longer than 8 ft? use in-store pickup or local delivery where available.
• Full-section reference: standard sections may be 10 ft before cutting, but shipped pieces must be 8 ft or shorter.
• Profile size: 1.5 in x 1.5 in equal-leg T-metal profile.
• Before checkout: confirm footage, piece length, color, roof-wall detail, siding condition, gutter location, and the best fulfillment method.

Key Benefits at a Glance

Roof-Wall Water Does Not Forgive Lazy Flashing

Roof-wall intersections, dormer edges, trim returns, fascia corners, and gutter-adjacent transitions can become leak points when water is not layered outward and redirected correctly. That is where staining, hidden wall moisture, soft trim, fascia damage, and callbacks start.

This 1.5 x 1.5 T-metal flashing gives compatible transitions a cleaner metal water-control detail: equal 1.5 in legs, 26ga steel construction, measured-by-foot ordering, color-match support, and clear piece-length planning before the job gets complicated.

Built for Roof-Wall, Trim, Fascia, and Gutter-Adjacent Details

1.5 x 1.5 T-Metal Flashing is a formed equal-leg metal flashing profile used where a compatible transition needs a clean 26ga steel water-control piece. The profile has two 1.5 in legs as shown in the profile drawing.

For gutter installers and roofline crews, the value is practical: water does not care whether the weak point is called roofing, siding, trim, fascia, or gutter work. If runoff slips behind the gutter line or enters the wall transition, the finished job still gets blamed.

Use this T-metal profile where the shape fits the project detail. It may be useful for compatible roof-wall transitions, sidewall repairs, trim transitions, fascia-edge work, dormer areas, and gutter-adjacent water-control details. It should not be treated as a universal substitute for required individual step flashing, kick-out flashing, counter flashing, drip edge, gutter apron, or custom-bent metal.

This product is sold by the foot. Shipped pieces must be 8 ft or shorter because long flashing is expensive to box, protect, and move through carriers. Longer pieces should be arranged through in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.

Use website chat first to confirm total footage, piece length, color, profile fit, roof-wall detail, and fulfillment option before ordering. Email and phone are available as secondary support options.

Why This Flashing Detail Matters

A gutter can move a lot of water, but it cannot fix a bad roof-wall transition. If water gets behind siding, fascia, trim, or wall flashing before it reaches the gutter, the system can still leak even when the gutter itself is installed correctly.

This equal-leg T-metal profile gives contractors a clean metal option for compatible transitions where water needs a controlled path. It is especially useful on repair work where roofline, wall, trim, and gutter details all meet in one tight corner.

The strongest order starts with three checks: total footage, maximum piece length, and whether the material is being shipped in 8 ft sections or handled locally in longer pieces.

Contractor Applications

How T-Metal Flashing Works

T-metal flashing is used as a formed metal transition piece where water needs to be redirected across a roof-wall, trim, or edge detail. In gutter-related work, the goal is to keep runoff layered outward and moving toward the gutter path instead of behind fascia, siding, or wall joints.

At roof-wall intersections, flashing details must be layered shingle-style so upper materials shed water over lower materials. Step flashing and kick-out flashing may be required in many wall-intersection details; this T-metal profile should only be used where the profile matches the project and does not replace a required diverter or individual flashing piece.

Installation sequence matters. Always follow governing local code, roof manufacturer guidance, wall drainage-plane requirements, fastener requirements, and inspector expectations for the specific roof and wall system.

Choose the Right Flashing Profile for the Job

Key Features

Summary

Choose 1.5 x 1.5 T-Metal Flashing when the job needs an equal-leg 26ga steel transition profile for compatible roof-wall, trim, fascia, or gutter-adjacent water-control work. Order by total linear feet, select piece lengths carefully, and keep shipped pieces at 8 ft or shorter.

Key Benefits

• Helps manage water at compatible roof-wall transition details
• Supports gutter-adjacent runoff control where water needs a cleaner path
• 1.5 x 1.5 equal-leg profile for compatible flashing conditions
• 26ga steel supports professional exterior metal work
• Sold by foot for measured ordering
• 8 ft shipping limit keeps long-piece freight expectations clear
• Longer pieces can be planned for pickup or local delivery where available
• Useful for roof-wall, sidewall, dormer, chimney, and trim transition work
• Useful during gutter replacement when adjacent flashing details also need attention
• Special colors may be preordered when project matching is needed
• Helps prevent wrong-profile mistakes that can create leaks and callbacks
• Can pair with compatible sealant, fasteners, roofing, siding, and gutter components
• Supports cleaner exterior finish when coordinated with roof, trim, and gutter colors
• Works as part of a complete roofline and gutter water-control system
• GutterAll can help confirm footage and length through website chat

Product Specifications

Who Uses This Flashing?

Setup and Application Guide

1. Measure the full transition run that needs flashing.
2. Choose the total linear footage needed in the purchase area.
3. Plan piece lengths before checkout, keeping shipped pieces at 8 ft or shorter.
4. Choose pickup or local delivery for longer pieces where available.
5. Confirm the 1.5 x 1.5 profile fits the roof-wall, trim, fascia, or gutter-adjacent detail.
6. Confirm whether the detail requires individual step flashing, kick-out flashing, counter flashing, drip edge, gutter apron, or custom-bent flashing instead.
7. Cut the flashing with appropriate metal tools and use gloves to handle sharp edges.
8. Layer the flashing so upper materials shed water over lower materials and do not create a reverse lap.
9. Fasten and seal only as required by the roof, wall, gutter, or project specification.
10. After installation, verify runoff is directed toward the gutter or safe drainage path without entering the wall, fascia, trim, or roof deck assembly.

Pro Tip

Before using this as step-flashing material, confirm the actual roof detail. Many roof-wall conditions need individual step pieces or kick-out flashing, not one continuous strip. The expensive part is not the flashing — it is the callback when water finds the one gap everyone ignored.

Frequently Asked Questions

Cutting, Handling, and Installation Safety Notice

Metal flashing can have sharp edges, especially after cutting. Use gloves, eye protection, safe cutting tools, and proper handling practices.

Roofline, wall, and gutter work may involve ladders, roof edges, power tools, sharp metal, and fall hazards. Use safe access methods and follow applicable jobsite safety requirements.

Flashing must be integrated with the full roofline water-control system. Poor lapping, exposed gaps, weak fastening, incompatible metals, or incorrect profile selection can reduce performance.

Need Help Confirming Footage, Piece Length, or the Right Flashing Detail?

The right order depends on total footage, piece length, shipping limit, roof-wall layout, gutter position, trim condition, color, pickup, delivery, and whether another flashing profile is needed. Website chat is the fastest way to confirm before checkout.

Product Summary Box

1.5 x 1.5 T-Metal Flashing 26ga is a sold-by-foot equal-leg steel flashing profile for compatible roof-wall, trim, fascia, and gutter-adjacent water-control work. It helps contractors create cleaner transition details where water must stay out of wall, fascia, and trim assemblies. Shipped pieces are limited to 8 ft; longer pieces should be planned for pickup or local delivery where available.