1.5 x 1.5 T-Metal Flashing - Sold by Foot
1.5 x 1.5 T-Metal Flashing - Sold by Foot
Couldn't load pickup availability
1.5 x 1.5 T-Metal Flashing | Aluminum or Galvanized Steel | Sold by Foot | 8 ft Max Ship Length
1.5 x 1.5 T-Metal Flashing - Sold by Foot
Finish metal roof edges, fascia transitions, and gutter-adjacent details with a clean T-profile flashing built for measured exterior trim work.
Clear Pricing and Sizing
This T-Metal flashing is priced and sold by the foot. Enter the total number of linear feet needed for the roof edge, fascia run, gutter-adjacent transition, exterior trim detail, repair section, or metal roof edge work. Quantity 12 equals 12 total linear feet.
Shipped pieces are limited to 8 ft maximum length. Long formed metal is expensive to package and more likely to bend during transit, so shipped orders are cut into pieces no longer than 8 ft.
Need longer pieces? Longer lengths may be available for in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.
Built for Clean Metal Roof Edge and Gutter Transition Details
A gutter job can look clean at the front and still fail visually at the edge if the roof-to-fascia transition is rough, mismatched, or unfinished. This 1.5 x 1.5 T-Metal profile gives installers a formed flashing option for compatible metal roof edge, fascia, trim, and gutter-adjacent details.
Use it for: compatible metal roof edge flashing, T-profile roof trim, fascia edge flashing, gutter-edge transition work, exterior repair runs, commercial metal roof trim, agricultural building edge details, and measured metal flashing projects.
The Edge Detail Is Where a Clean Install Either Shows — or Gets Questioned
Gutters, fascia, siding, and roof panels all meet at visible edges. When the edge trim is skipped, bent poorly, or patched with the wrong shape, the finished job can look improvised. This T-Metal flashing helps create a cleaner transition where the profile fits the roof assembly and surrounding materials.
Cleaner edge metal helps the finished gutter and roof detail look intentional, measured, and ready for a professional handoff.
Aluminum or Galvanized Steel Options
This T-Metal flashing is available in aluminum or galvanized steel options, giving contractors flexibility for exterior metal trim, roof edge, and gutter-adjacent work. Aluminum is commonly selected for lighter handling and corrosion-resistant exterior details. Galvanized steel is commonly selected where a more rigid formed metal option is preferred.
Confirm material, finish, piece length, roof-edge fit, fastener method, and compatibility with surrounding materials before ordering.
Order by Total Feet, Not by Piece Count
This item is priced and ordered by linear foot. If the project needs 24 total feet, order 24. If the order ships, it may arrive as three 8 ft pieces or another cut combination that does not exceed the 8 ft shipping length limit.
For local pickup or local delivery, ask about available longer cuts before ordering.
Key Benefits at a Glance
Cleaner Edge Transitions
Helps finish compatible roof edge, fascia, trim, and gutter-adjacent areas with a more intentional metal detail.
Compact 1.5 x 1.5 Profile
Works for compatible edge details that need a small, formed T-profile instead of a wider drip edge or gutter apron.
Material Flexibility
Choose aluminum or galvanized steel depending on the exterior system, handling preference, and job requirement.
Ships up to 8 ft
Shipped pieces are limited to 8 ft or less to control long-item shipping cost and damage risk.
Profile Details
| Profile Area | Measurement | Why It Matters |
|---|---|---|
| Top leg | 1.5 in | Provides a compact horizontal leg for compatible metal roof edge and trim details. |
| Vertical face | 1.5 in | Creates a compact face for fascia-side, trim-side, and roof-edge transition details. |
| Profile style | T-Metal design | A formed metal shape for compatible metal roof edge, trim, and exterior transition work. |
| Material options | Aluminum or galvanized steel | Lets the material choice match the exterior system and job requirement. |
Pricing and Length Guide
| How It Works | What to Expect |
|---|---|
| Sold by foot | Quantity equals total linear feet ordered. |
| Shipping length | Maximum shipped piece length is 8 ft. |
| Local pickup | Longer pieces may be available for pickup at the Damascus, Oregon location. |
| Local delivery | Longer pieces may be available for local delivery depending on order size and route. |
| Example order | Order 20 ft and shipped pieces may be cut as 8 ft + 8 ft + 4 ft. |
Best-Fit Applications
| Application | Why It Fits |
|---|---|
| Metal roof edge transition | The compact T-profile can finish compatible metal roof edge areas without using a wider drip edge profile. |
| Gutter-adjacent trim work | Useful where the gutter line meets fascia, trim, or metal roof edge details that need a clean formed-metal transition. |
| Fascia edge flashing | The 1.5 in face can help create a more finished edge where the profile fits the assembly. |
| Commercial or agricultural metal trim | The profile can suit compatible metal roof and exterior trim runs on utility, shop, barn, and commercial structures. |
| Repair and replacement runs | Sold-by-foot ordering helps match the material quantity to measured job sections. |
T-Metal Flashing vs Drip Edge and Gutter Apron
| 1.5 x 1.5 T-Metal Flashing | Drip Edge or Gutter Apron Profiles |
|---|---|
| Compact T-profile for compatible metal roof edge and trim transitions. | Typically shaped to direct water off the roof edge and toward or away from fascia depending on profile type. |
| 1.5 in x 1.5 in profile for smaller edge details. | May use wider roof legs, taller faces, hems, kick-outs, or apron-style forms. |
| Available in aluminum or galvanized steel options. | Material and shape vary by product, roof system, and installation detail. |
| Best selected when the project specifically calls for T-Metal flashing. | Better selected when the roof or gutter detail specifically calls for drip edge or gutter apron. |
Key Features
| Feature | Customer Benefit |
|---|---|
| Sold by foot | Order the total footage needed for the project. |
| 8 ft maximum shipped length | Keeps shipped flashing pieces within a more practical long-item shipping size. |
| 1.5 x 1.5 profile | Works for compact edge details that do not need a wider roof-edge profile. |
| T-Metal design | Provides a formed profile for compatible metal roof, trim, fascia, and gutter-adjacent transitions. |
| Aluminum option | Gives installers a lightweight exterior flashing option. |
| Galvanized steel option | Gives installers a more rigid formed metal option for compatible exterior work. |
Quick Product Summary
1.5 x 1.5 T-Metal Flashing for compatible metal roof edge, fascia, trim, gutter-adjacent, and exterior transition work. Available in aluminum or galvanized steel options. Sold by foot so contractors and property owners can order the total linear footage needed. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Key Benefits
- Sold by foot for cleaner project quantity planning
- Shipped pieces limited to 8 ft for practical long-item delivery
- Longer pieces may be available for pickup or local delivery
- Compact 1.5 x 1.5 profile for smaller compatible edge details
- T-Metal shape for compatible metal roof edge and trim transitions
- Available in aluminum or galvanized steel options
- Useful for fascia edges, gutter-adjacent details, exterior trim, and metal roof edge work
- Helps create a cleaner finished appearance than improvised flat metal
- Good option for gutter installers, roofers, remodelers, and exterior crews
- Practical for repair work, replacement work, and new exterior installations
- Makes quantity planning easier for measured roof-edge and fascia runs
- Helps reduce jobsite guessing by matching order quantity to total footage
- Can support cleaner transitions on shops, barns, commercial buildings, and residential exterior projects
- Works with compatible fasteners, sealants, roofing materials, and flashing methods
- Available from GutterAll in Damascus, Oregon
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 1.5 x 1.5 T-Metal Flashing - Sold by Foot |
| Product Type | T-Metal flashing, T-profile flashing, metal roof edge flashing, fascia edge flashing, gutter-edge transition flashing, exterior trim flashing |
| Profile Size | 1.5 x 1.5 nominal profile |
| Top Leg | 1.5 in |
| Vertical Face | 1.5 in |
| Profile Style | T-Metal design |
| Material Options | Aluminum or galvanized steel |
| Sold As | Per linear foot |
| Pricing Basis | Quantity equals total linear feet selected in the purchase area. |
| Full Section Reference | 10 ft section reference; shipped pieces are limited to 8 ft or shorter. |
| Shipping Length Limit | Maximum 8 ft per shipped piece |
| Longer Pieces | Ask about longer pieces for pickup or local delivery before ordering. |
| Primary Uses | Metal roof edge details, fascia edge flashing, gutter-adjacent transitions, exterior trim, commercial roof edge trim, agricultural building trim, repair runs, and exterior transition details |
| Best Fit | Projects needing a compact 1.5 x 1.5 T-profile in aluminum or galvanized steel |
| Common Accessories | Compatible fasteners, sealant, snips, roof safety gear, metal roof components, gutter components, fascia materials, and trim materials as needed |
| Confirm Before Use | Roof-edge assembly, panel system, gutter position, fascia condition, overlap direction, fastening method, roof safety plan, finish match, and whether a different flashing profile is required |
| Not Intended For | Applications requiring drip edge, gutter apron, wall step flashing, roof valley flashing, structural support, or installation that conflicts with local requirements or manufacturer instructions |
| Expected Service Life | Varies by material, coating or finish condition, climate exposure, installation quality, cut edges, fastener choice, sealant use, drainage conditions, maintenance, and compatibility with surrounding materials. |
Who Uses This T-Metal Flashing?
Gutter Installers and Exterior Crews
- Finishing gutter-adjacent roof edge and fascia transition details
- Matching measured project footage to exterior trim runs
- Ordering compact flashing for repair, replacement, and transition work
Roofers, Metal Roof Crews, and Builders
- Using a compact T-profile for compatible metal roof edge and trim layouts
- Choosing aluminum or galvanized steel depending on the exterior system
- Planning order footage around edges, transitions, repairs, and finished trim runs
Experienced DIY Buyers
- Replacing compatible exterior edge flashing near roof, gutter, or fascia details
- Ordering smaller project quantities by the foot
- Using 8 ft or shorter shipped pieces for manageable handling
Setup and Planning Guide
- Measure the total metal roof edge, fascia, trim, repair, or gutter-adjacent transition footage needed.
- Order the total number of linear feet required.
- For shipped orders, plan around an 8 ft maximum piece length.
- For pickup or local delivery, ask about available longer pieces before ordering.
- Choose aluminum or galvanized steel based on the project requirement.
- Confirm whether the 1.5 x 1.5 T-Metal profile fits the actual edge or transition detail.
- Use proper overlap direction, drainage clearance, and compatible surrounding materials.
- Use compatible fasteners and sealants for the roof, fascia, trim, or gutter-adjacent system.
- Check fit and water path before fastening the full run.
- Verify the finished edge is aligned, secure, and compatible with the surrounding roof and gutter components.
Installation and Ordering Notice
This flashing is sold per linear foot. Shipped pieces are limited to 8 ft maximum length because long formed metal is costly to ship and more likely to bend or damage during transit.
For longer pieces, use pickup or ask about local delivery availability before ordering.
Use proper overlap, drainage clearance, compatible fasteners, and sealant practices for the roof, fascia, trim, or gutter-adjacent system being worked on.
Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height. Cut metal can be sharp.
Need Help Planning Footage, Material, or Cut Lengths?
Use website chat for help planning total footage, shipped cut lengths, pickup options, local delivery availability, and whether this 1.5 x 1.5 T-Metal profile is the right fit for the exterior edge detail.
Order by Footage
Quantity equals total linear feet needed for the project.
Ships up to 8 ft
Shipped pieces are cut to 8 ft or less for practical delivery.
Ask About Longer Pieces
Longer pieces may be available for pickup or local delivery.
Product Summary Box
1.5 x 1.5 T-Metal Flashing for compatible metal roof edge, fascia, trim, gutter-adjacent, and exterior transition work. Available in aluminum or galvanized steel options. Sold by foot for exact project footage. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Frequently Asked Questions
What is 1.5 x 1.5 T-Metal flashing used for?
It is used for compatible metal roof edge, fascia, exterior trim, and gutter-adjacent transition details where a compact T-profile flashing shape fits the project.
How is this flashing priced and sized?
It is sold by the foot. The purchase quantity should match the total linear feet needed for the project. The profile is 1.5 x 1.5 nominal size.
Can pieces longer than 8 ft be shipped?
No. Shipped pieces are limited to 8 ft because long formed metal is costly to package and more likely to bend during transit. Longer pieces should be arranged through pickup or local delivery where available.
Is this the same as drip edge or gutter apron?
No. This is T-Metal flashing. Drip edge and gutter apron are different roof-edge profiles and may be better for certain roof-to-gutter details.
What is GutterAll's return policy for this product?
GutterAll offers a 30-day return window for unused standard products in original condition. Cut, bent, scratched, installed, altered, custom-length, custom-color, or customer-damaged flashing may not be returnable unless defective. Customers should confirm footage, piece length, material, finish, profile, pickup, delivery, and shipping limits before ordering. Return shipping or return transport is the buyer's responsibility unless the return is due to defect or fulfillment error. Refunds are processed within 5 to 7 business days after approval and receipt.
What fulfillment options are available?
In-store pickup at GutterAll in Damascus, Oregon, local delivery where available, and shipping are available depending on selected piece length. Shipped pieces are limited to 8 ft. Typical small-order handling is 1 to 2 business days, and transit time is typically 3 to 7 business days depending on destination and carrier.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
