1.5 x 5 Aluminum Drip Edge Flashing - Sold by Foot
1.5 x 5 Aluminum Drip Edge Flashing - Sold by Foot
Couldn't load pickup availability
1.5 x 5 Aluminum Drip Edge | 5 in Roof Leg | 1.5 in Face | Sold by Foot | 8 ft Max Ship Length
1.5 x 5 Aluminum Drip Edge Flashing - Sold by Foot
Give roof runoff a cleaner path into the gutter with wide-leg aluminum drip edge flashing built for roof-edge control, fascia coverage, and a sharper finished gutter line.
Clear Pricing and Sizing
This drip edge flashing is priced and sold by the foot. Enter the total number of linear feet needed for the roof edge, gutter run, repair section, eave, rake, fascia transition, or roofline water-control detail. Quantity 12 equals 12 total linear feet.
Shipped pieces are limited to 8 ft maximum length. Long formed metal is expensive to package and more likely to bend during transit, so shipped orders are cut into pieces no longer than 8 ft.
Need longer pieces? Longer lengths may be available for in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.
Built for Wide Roof-Edge Coverage and Cleaner Gutter Entry
A gutter can only catch water that reaches it cleanly. This 1.5 x 5 aluminum drip edge profile gives installers a 5 in roof leg and a 1.5 in face so compatible roof edges can move runoff toward the gutter path instead of letting water curl back toward fascia.
Use it for: compatible eave flashing, rake flashing, roof-edge flashing, gutter-edge flashing, fascia-side coverage, gutter replacement prep, exterior repair runs, and projects that call for a wider 5 in roof leg with a lower 1.5 in face.
The Roof Edge Is Where Water Either Behaves — or Gets Expensive
New gutters do not fix a weak roof edge by themselves. If the edge metal is missing, short, bent, or poorly matched to the gutter line, water can still find the fascia. This 1.5 x 5 aluminum profile gives crews a wide-leg option for roof-edge water-control work where the roof assembly allows it.
A cleaner metal edge helps the finished gutter detail look intentional and helps runoff follow the path the installer planned.
Aluminum Construction with Multiple Color Options
The aluminum construction gives contractors a lightweight formed metal profile for exterior roof-edge and gutter-adjacent work. Multiple colors help coordinate the flashing with gutters, fascia, trim, siding, roof accents, and exterior color schemes.
Confirm color, piece length, roof-edge fit, fastener method, and surrounding material compatibility before ordering.
Order by Total Feet, Not by Piece Count
This item is priced and ordered by linear foot. If the project needs 24 total feet, order 24. If the order ships, it may arrive as three 8 ft pieces or another cut combination that does not exceed the 8 ft shipping length limit.
For local pickup or local delivery, ask about available longer cuts before ordering.
Key Benefits at a Glance
Cleaner Runoff Direction
Helps guide roof water toward the gutter path instead of letting it curl back behind the fascia.
Wide 5 in Roof Leg
Provides broad roof-side coverage where the project needs more horizontal metal at the roof edge.
1.5 in Face
Creates a lower-profile fascia-side edge compared with 2 in face profiles.
Ships up to 8 ft
Shipped pieces are limited to 8 ft or less to control long-item shipping cost and damage risk.
Profile Details
| Profile Area | Measurement | Why It Matters |
|---|---|---|
| Roof leg | 5 in | Provides wide roof-side coverage for compatible roof-edge details. |
| Face / drop | 1.5 in | Creates a lower fascia-side edge than 2 in face profiles while still giving visible drip edge coverage. |
| Bend | Default 120 degree bend shown in profile drawing | Defines the transition between the roof leg and face. |
| Material | Aluminum | Gives installers a lightweight formed flashing profile for exterior roof-edge work. |
Pricing and Length Guide
| How It Works | What to Expect |
|---|---|
| Sold by foot | Quantity equals total linear feet ordered. |
| Shipping length | Maximum shipped piece length is 8 ft. |
| Local pickup | Longer pieces may be available for pickup at the Damascus, Oregon location. |
| Local delivery | Longer pieces may be available for local delivery depending on order size and route. |
| Example order | Order 20 ft and shipped pieces may be cut as 8 ft + 8 ft + 4 ft. |
Best-Fit Applications
| Application | Why It Fits |
|---|---|
| Wide roof-edge water control | The 5 in roof leg gives broad horizontal coverage for compatible eave and rake details. |
| Gutter installation prep | Useful when the gutter install also needs a cleaner roof-edge transition detail. |
| Lower-profile fascia edge | The 1.5 in face works where a 2 in face may be more vertical coverage than the project needs. |
| Color-matched exterior work | Multiple colors help coordinate with gutters, fascia, trim, siding, and roof accents. |
| Repair and replacement runs | Sold-by-foot ordering helps match the material quantity to measured job sections. |
1.5 x 5 Aluminum Drip Edge vs Smaller Profiles
| 1.5 x 5 Aluminum Drip Edge | Smaller Drip Edge Profiles |
|---|---|
| 5 in roof leg for broad roof-side coverage. | Shorter roof legs may fit compact details but provide less horizontal coverage. |
| 1.5 in face for a lower-profile fascia-side edge. | 2 in faces may be better when more vertical fascia-side coverage is needed. |
| Aluminum construction for lightweight handling. | Other profiles may use different materials depending on the project requirement. |
| Sold by foot for measured job planning. | May also be sold by foot, piece, or fixed-length section depending on item. |
Key Features
| Feature | Customer Benefit |
|---|---|
| Sold by foot | Order the total footage needed for the project. |
| 8 ft maximum shipped length | Keeps shipped flashing pieces within a more practical long-item shipping size. |
| 5 in roof leg | Provides broad roof-side coverage for compatible roof-edge details. |
| 1.5 in face | Creates a lower-profile fascia-side edge compared with 2 in face profiles. |
| Aluminum construction | Provides a lightweight formed flashing profile for exterior roof-edge work. |
| Multiple colors | Helps coordinate with gutters, fascia, trim, siding, and exterior finishes. |
Quick Product Summary
1.5 x 5 Aluminum Drip Edge Flashing for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior water-control work. The profile shown has a 5 in roof leg, 1.5 in face, and default 120 degree bend. Sold by foot so contractors and property owners can order the total linear footage needed. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Key Benefits
- Sold by foot for cleaner project quantity planning
- Shipped pieces limited to 8 ft for practical long-item delivery
- Longer pieces may be available for pickup or local delivery
- 5 in roof leg for broad roof-side coverage where compatible
- 1.5 in face for a lower-profile fascia-side drip edge
- Aluminum construction for lightweight handling
- Useful for eave, rake, roof-edge, fascia, gutter-adjacent, and trim transition details
- Helps guide roof runoff toward the gutter path when installed correctly
- Good option for gutter installers, roofers, remodelers, and exterior crews
- Helps create a cleaner finished appearance than improvised flat metal
- Practical for repair work, replacement work, and new exterior installations
- Makes quantity planning easier for measured roof-edge and fascia runs
- Multiple colors help match gutters, fascia, trim, siding, and roof accents
- Works with compatible fasteners, sealants, roofing materials, and flashing methods
- Available from GutterAll in Damascus, Oregon
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 1.5 x 5 Aluminum Drip Edge Flashing - Sold by Foot |
| Product Type | Aluminum drip edge flashing, roof-edge flashing, gutter-edge flashing, fascia flashing, eave flashing, rake flashing |
| Profile Size | 1.5 x 5 nominal profile |
| Roof Leg | 5 in |
| Face / Drop | 1.5 in |
| Bend | Default 120 degree bend shown in profile drawing |
| Material | Aluminum |
| Color Options | Multiple colors available; confirm current color options before ordering. |
| Sold As | Per linear foot |
| Pricing Basis | Quantity equals total linear feet selected in the purchase area. |
| Full Section Reference | 10 ft section reference; shipped pieces are limited to 8 ft or shorter. |
| Shipping Length Limit | Maximum 8 ft per shipped piece |
| Longer Pieces | Ask about longer pieces for pickup or local delivery before ordering. |
| Primary Uses | Roof-edge details, eave flashing, rake flashing, fascia protection, gutter-adjacent transitions, repair runs, and exterior water-control details |
| Best Fit | Projects needing a wide 5 in roof leg and 1.5 in face in a formed aluminum drip edge profile |
| Common Accessories | Compatible fasteners, sealant, snips, roof safety gear, underlayment, roofing materials, gutter components, and fascia repair materials as needed |
| Confirm Before Use | Roof-edge assembly, gutter position, fascia condition, overlap direction, fastening method, roof safety plan, color match, and whether a different flashing profile is required |
| Not Intended For | Applications requiring gutter apron, wall step flashing, metal roof-specific flashing, tile roof flashing, structural support, or installation that conflicts with local requirements or manufacturer instructions |
| Expected Service Life | Varies by finish condition, climate exposure, installation quality, cut edges, fastener choice, sealant use, drainage conditions, maintenance, and compatibility with surrounding materials. |
Who Uses This Aluminum Drip Edge?
Gutter Installers and Exterior Crews
- Preparing roof-edge details before or during gutter installation
- Addressing water that tracks behind gutters or against fascia
- Ordering exact footage for repair, replacement, and project runs
Roofers, Remodelers, and Builders
- Using a wide-leg aluminum drip edge profile for compatible roof-edge layouts
- Choosing a lower 1.5 in face where a 2 in face is more vertical coverage than needed
- Planning order footage around eaves, rakes, fascia runs, and repair sections
Experienced DIY Buyers
- Replacing compatible roof-edge flashing near gutter and fascia details
- Ordering smaller project quantities by the foot
- Using 8 ft or shorter shipped pieces for manageable handling
Setup and Planning Guide
- Measure the total eave, rake, roof-edge, fascia, repair, or gutter-adjacent transition footage needed.
- Order the total number of linear feet required.
- For shipped orders, plan around an 8 ft maximum piece length.
- For pickup or local delivery, ask about available longer pieces before ordering.
- Confirm the selected color works with the gutter, fascia, roof, siding, and trim.
- Confirm whether the 5 in roof leg and 1.5 in face fit the actual roof-edge detail.
- Use proper flashing sequence, overlap direction, drainage clearance, and compatible surrounding materials.
- Use compatible fasteners and sealants for the roofing and gutter system.
- Check fit and water path before fastening the full run.
- Verify runoff is directed outward and toward the gutter path without running behind the fascia.
Installation and Ordering Notice
This flashing is sold per linear foot. Shipped pieces are limited to 8 ft maximum length because long formed metal is costly to ship and more likely to bend or damage during transit.
For longer pieces, use pickup or ask about local delivery availability before ordering.
Use proper flashing sequence, overlap, drainage clearance, compatible fasteners, and sealant practices for the roof and gutter system being worked on.
Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height. Cut metal can be sharp.
Need Help Planning Footage, Color, or Cut Lengths?
Use website chat for help planning total footage, shipped cut lengths, pickup options, local delivery availability, and whether this 1.5 x 5 aluminum drip edge profile is the right fit for the roof-edge detail.
Order by Footage
Quantity equals total linear feet needed for the project.
Ships up to 8 ft
Shipped pieces are cut to 8 ft or less for practical delivery.
Ask About Longer Pieces
Longer pieces may be available for pickup or local delivery.
Product Summary Box
1.5 x 5 Aluminum Drip Edge Flashing for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior water-control work. The profile shown has a 5 in roof leg, 1.5 in face, and default 120 degree bend. Sold by foot for exact project footage. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Frequently Asked Questions
What is 1.5 x 5 aluminum drip edge flashing used for?
It is used for compatible eave, rake, roof-edge, fascia, and gutter-adjacent details where an aluminum drip edge profile with a 5 in roof leg and 1.5 in face fits the project.
How is this flashing priced and sized?
It is sold by the foot. The purchase quantity should match the total linear feet needed for the project. The profile shown has a 5 in roof leg and 1.5 in face.
Can pieces longer than 8 ft be shipped?
No. Shipped pieces are limited to 8 ft because long formed metal is costly to package and more likely to bend during transit. Longer pieces should be arranged through pickup or local delivery where available.
Is this the same as gutter apron?
No. This is aluminum drip edge flashing. Gutter apron is a different roof-edge profile and may be better for certain gutter-to-roof details.
What is GutterAll's return policy for this product?
GutterAll offers a 30-day return window for unused standard products in original condition. Cut, bent, scratched, installed, altered, custom-length, custom-color, or customer-damaged flashing may not be returnable unless defective. Customers should confirm footage, piece length, color, profile, pickup, delivery, and shipping limits before ordering. Return shipping or return transport is the buyer's responsibility unless the return is due to defect or fulfillment error. Refunds are processed within 5 to 7 business days after approval and receipt.
What fulfillment options are available?
In-store pickup at GutterAll in Damascus, Oregon, local delivery where available, and shipping are available depending on selected piece length. Shipped pieces are limited to 8 ft. Typical small-order handling is 1 to 2 business days, and transit time is typically 3 to 7 business days depending on destination and carrier.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
