1.5 x 5 HEM Super Drip Edge Flashing 26ga - Sold by Foot

Clear Pricing and Sizing

This drip edge flashing is priced and sold by the foot. Enter the total number of linear feet needed for the roof edge, gutter run, repair section, eave, rake, fascia transition, or roofline water-control detail. Quantity 12 equals 12 total linear feet.

Shipped pieces are limited to 8 ft maximum length. Long formed metal is expensive to package and more likely to bend during transit, so shipped orders are cut into pieces no longer than 8 ft.

Need longer pieces? Longer lengths may be available for in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.

Built for Wide Roof-Edge Coverage and Cleaner Gutter Entry

A gutter can only catch water that reaches it cleanly. This 1.5 x 5 HEM Super drip edge profile gives installers a 5 in roof leg and a 1.5 in face so compatible roof edges can move runoff toward the gutter path instead of letting water curl back toward fascia.

Use it for: compatible eave flashing, rake flashing, roof-edge flashing, gutter-edge flashing, fascia-side coverage, gutter replacement prep, exterior repair runs, and projects that call for a wider 5 in roof leg with a lower 1.5 in face.

The Roof Edge Is Where Water Either Behaves — or Gets Expensive

New gutters do not fix a weak roof edge by themselves. If the edge metal is missing, short, bent, or poorly matched to the gutter line, water can still find the fascia. This HEM Super profile gives crews a wide-leg steel option for roof-edge water-control work where the roof assembly allows it.

A cleaner metal edge helps the finished gutter detail look intentional and helps runoff follow the path the installer planned.

26ga Steel with Hemmed Lower Edge

The 26ga steel construction gives contractors a formed metal profile for exterior roof-edge and gutter-adjacent work. The hemmed lower edge creates a folded finish compared with a raw exposed edge, which can make the visible edge cleaner and easier to handle when the material is not freshly cut.

Cut ends and modified pieces can still be sharp. Use gloves, eye protection, safe cutting tools, and correct handling methods.

Order by Total Feet, Not by Piece Count

This item is priced and ordered by linear foot. If the project needs 24 total feet, order 24. If the order ships, it may arrive as three 8 ft pieces or another cut combination that does not exceed the 8 ft shipping length limit.

For local pickup or local delivery, ask about available longer cuts before ordering.

Key Benefits at a Glance

Profile Details

Pricing and Length Guide

Best-Fit Applications

1.5 x 5 HEM Super vs Standard Drip Edge Profiles

Key Features

Quick Product Summary

1.5 x 5 HEM Super Drip Edge Flashing made from 26ga steel for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior water-control work. The profile shown has a 5 in roof leg, 1.5 in face, hemmed lower edge, and default 120 degree bend. Sold by foot so contractors and property owners can order the total linear footage needed. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.

Key Benefits

• Sold by foot for cleaner project quantity planning
• Shipped pieces limited to 8 ft for practical long-item delivery
• Longer pieces may be available for pickup or local delivery
• 5 in roof leg for broad roof-side coverage where compatible
• 1.5 in face for a lower-profile fascia-side drip edge
• Hemmed lower edge creates a cleaner finished metal profile
• 26ga steel construction for formed exterior flashing work
• Useful for eave, rake, roof-edge, fascia, gutter-adjacent, and trim transition details
• Helps guide roof runoff toward the gutter path when installed correctly
• Good option for gutter installers, roofers, remodelers, and exterior crews
• Helps create a cleaner finished appearance than improvised flat metal
• Practical for repair work, replacement work, and new exterior installations
• Makes quantity planning easier for measured roof-edge and fascia runs
• Works with compatible fasteners, sealants, roofing materials, and flashing methods
• Available from GutterAll in Damascus, Oregon

Product Specifications

Who Uses This HEM Super Drip Edge?

Setup and Planning Guide

1. Measure the total eave, rake, roof-edge, fascia, repair, or gutter-adjacent transition footage needed.
2. Order the total number of linear feet required.
3. For shipped orders, plan around an 8 ft maximum piece length.
4. For pickup or local delivery, ask about available longer pieces before ordering.
5. Confirm the selected finish works with the gutter, fascia, roof, siding, and trim.
6. Confirm whether the 5 in roof leg, 1.5 in face, and hemmed lower edge fit the actual roof-edge detail.
7. Use proper flashing sequence, overlap direction, drainage clearance, and compatible surrounding materials.
8. Use compatible fasteners and sealants for the roofing and gutter system.
9. Check fit and water path before fastening the full run.
10. Verify runoff is directed outward and toward the gutter path without running behind the fascia.

Installation and Ordering Notice

This flashing is sold per linear foot. Shipped pieces are limited to 8 ft maximum length because long formed metal is costly to ship and more likely to bend or damage during transit.

For longer pieces, use pickup or ask about local delivery availability before ordering.

Use proper flashing sequence, overlap, drainage clearance, compatible fasteners, and sealant practices for the roof and gutter system being worked on.

Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height. Cut metal can be sharp, including modified hemmed profiles.

Need Help Planning Footage, Finish, or Cut Lengths?

Use website chat for help planning total footage, shipped cut lengths, pickup options, local delivery availability, and whether this 1.5 x 5 HEM Super drip edge profile is the right fit for the roof-edge detail.

Product Summary Box

1.5 x 5 HEM Super Drip Edge Flashing made from 26ga steel for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior water-control work. The profile shown has a 5 in roof leg, 1.5 in face, hemmed lower edge, and default 120 degree bend. Sold by foot for exact project footage. Shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.

Frequently Asked Questions