#10-12 x 1.5 in White Hex Washer Screws - 250 Pack

White Gutters Look Better When the Fasteners Do Not Steal the Show

A bright silver or mismatched screw can stand out on white gutter systems, especially near front entries, fascia lines, downspout straps, and visible bracket locations. Small hardware can make clean work look patched when the finish does not belong.

#10-12 x 1.5 in White Hex Washer Screws help installers keep visible fastening points cleaner on white gutter work. The white finish blends better with many white gutter systems than silver hardware, the 1.5 in length adds reach through common fastening stacks, and the hex washer head gives crews strong driver engagement with a wider seating surface.

Key Benefits at a Glance

White Hex Washer Screws for Gutter Installation, Fascia Fastening, Hangers, Brackets, and Repair Kits

#10-12 x 1.5 in White Hex Washer Screws are self-tapping white gutter fasteners with an integrated washer-style head and hex drive. They are made for practical exterior fastening where installers want a cleaner color match on white gutter systems and a longer screw than shorter 1 inch fasteners.

For gutter installers, these screws are useful for white gutter hangers, brackets, downspout straps, fascia fastening, trim details, exterior repair work, and service kits. The 1.5 in length gives added reach when the fastening stack includes gutter material, hardware, trim, or thicker backing conditions.

The hex washer head helps crews drive the screw with better control, while the washer-style bearing surface helps the head seat more evenly than a narrow head. The self-tapping design can speed work in suitable materials, though pilot holes may still be smart near edges, in harder materials, or where splitting, wandering, or finish damage is a concern.

GutterAll in Damascus, OR supports gutter installers, exterior contractors, maintenance crews, and capable homeowners with fasteners, gutter supplies, pickup, local delivery, nationwide shipping, and website chat support before checkout.

The Finish Matters When the Screw Stays Visible

White gutters are chosen because they look clean, bright, and low-profile on many homes. That clean line can be interrupted when exposed fasteners do not match the system. White screws help the hardware feel intentional instead of distracting.

This is especially useful on front-facing gutter runs, white fascia areas, downspout straps, visible brackets, and repair points where silver screws would draw attention. The goal is simple: keep the eye on the finished gutter line, not the fastener head.

Always confirm the white finish is acceptable for the exact gutter color, because “white” can vary between manufacturers, materials, and age of the existing system.

Best Uses for Gutter and Exterior Crews

How the Hex Washer Head Helps During Installation

A hex head gives the driver more positive engagement than many common drive styles, helping reduce slipping when the correct hex driver or nut setter is used.

The integrated washer-style head spreads pressure across a wider area than a narrow screw head. That helps the screw seat more cleanly on compatible brackets, hangers, straps, fascia, and exterior surfaces.

For best results, drive straight, use the correct driver, avoid over-driving, and confirm the screw length is appropriate for the backing and clearance behind the fastening point.

Choose the Right White Screw Option

Key Features

Quick Decision Summary

Choose #10-12 x 1.5 in White Hex Washer Screws when the job needs a longer white gutter fastener for white gutter hangers, brackets, straps, fascia fastening, downspout accessories, exterior repairs, or contractor restocking. The hex drive supports cleaner driving, while the integrated washer head helps the screw seat with a wider bearing surface.

Benefits Crews Notice Fast

• Looks cleaner on many white gutter systems than silver fasteners
• Adds extra reach compared with shorter 1 in fasteners
• Useful for gutter hangers, brackets, straps, fascia, and repair work
• Hex head supports cleaner driver engagement with the right tool
• Integrated washer-style head helps spread seating pressure
• Self-tapping design can reduce extra prep in suitable materials
• White finish supports a cleaner finished look on visible fastening points
• Single option works for small fixes, samples, and test fitting
• 250-piece bag works for regular installation and truck restocking
• Good fit for service kits, warehouse bins, and install trailers
• Useful when a longer screw is needed through thicker material stacks
• Helps reduce driver slipping compared with weaker drive engagement
• Pairs well with many white aluminum gutter and downspout setups
• Supports cleaner seating when driven straight and not over-tightened
• Available with pickup, local delivery, and nationwide shipping through checkout

Product Specifications

Who Uses These Screws?

Installation Guide

1. Confirm that #10-12 x 1.5 in white screws are appropriate for the gutter material, bracket, fascia, and backing.
2. Check that the white finish is acceptable for the exact gutter color before installing in visible areas.
3. Check clearance behind the fastening point so the 1.5 in screw will not hit hidden materials.
4. Use the correct hex driver or nut setter that fits the screw head securely.
5. Mark fastening points and keep brackets, hangers, straps, or accessories properly aligned.
6. Use pilot holes when working near edges, through thicker material stacks, or into harder or split-prone substrates.
7. Drive the screw straight at a controlled speed so the head seats evenly.
8. Stop when the washer-style head is seated; avoid over-driving into thin metal, soft fascia, or painted surfaces.
9. Check that the fastened part is secure without crushing, distorting, or misaligning the material.
10. Inspect exterior fasteners periodically, especially on weather-exposed gutter runs, brackets, straps, and repair points.

Pro Tip

Keep white, silver, and painted fasteners in separate labeled bins. The right screw color keeps the finished gutter line clean; the wrong one can make a quality install look like a repair patch.

Frequently Asked Questions

Fastener Safety and Fit Notice

Wear eye protection when driving screws, cutting metal, drilling pilot holes, or working near sharp gutter edges. Gloves are recommended when handling sheet metal and fasteners.

Select the correct screw length for the material stack. A screw that is too short may not hold properly, while a screw that is too long may protrude or contact hidden materials.

Confirm compatibility with the gutter material, bracket, fascia, backing, coating, and exposure conditions before installation. Use alternate fasteners or barriers where the project requires them.

Gutter work may require ladder or roof access. Use stable footing, proper ladder setup, and fall protection when required.

Need Help Choosing the Right White Screw Quantity or Length?

The right screw setup depends on gutter color, bracket type, fascia condition, backing depth, job size, and crew workflow. Use website chat to confirm fit, quantity, pickup, local delivery, or nationwide shipping.

Product Summary Box

#10-12 x 1.5 in White Hex Washer Screws are white self-tapping gutter fasteners with a hex drive, integrated washer-style head, and longer 1.5 in reach for white gutter hangers, brackets, fascia fastening, downspout straps, exterior repairs, and contractor restocking. Available as single screws or 250-piece bags.