#12 x 2-1/2 in Silver Hex Washer Screws - 250 Pack

Longer Reach, Cleaner Seating, Better Fastening Flow

Gutter work often needs a fastener that can reach through trim layers, brackets, straps, fascia contact points, and exterior hardware without leaving the connection looking rough or mismatched.

These #12 x 2-1/2 in silver hex washer screws give crews a longer exterior fastener with a ceramic-coated finish, Type 17 point, washer-style bearing surface, and 250-count quantity for repeated installs and service work.

Key Benefits at a Glance

A Longer Silver Fastener for Gutter, Fascia, Trim, and Exterior Hardware

The #12 x 2-1/2 in Silver Hex Washer Screw is a longer exterior fastener for gutter installers, cleaning contractors, remodelers, and homeowners who need secure fastening through visible exterior components and into suitable backing.

The silver ceramic-coated finish fits many metal, trim, fascia, bracket, strap, and light exterior hardware applications where a bright white fastener is not the right look. The hex washer head gives the driver a strong outside-drive surface, while the washer-style head gives the connection a broader bearing area than a narrow screw head.

The 2-1/2 in length is useful where the fastener needs more reach than a shorter screw, especially around fascia buildup, trim layers, gutter accessories, support points, and exterior hardware. The Type 17 point helps start into suitable wood backing with smoother control than a blunt point.

GutterAll in Damascus, OR supports gutter crews, cleaning contractors, exterior remodelers, and DIY homeowners with fastener selection, pickup, local delivery, and nationwide shipping.

When the Connection Needs More Reach, the Fastener Choice Matters

A short fastener may work on thin surface material, but gutter installations often run into fascia buildup, trim layers, brackets, straps, and support points that need deeper engagement into suitable backing.

The 2-1/2 in length gives installers more reach for compatible exterior fastening. The Type 17 point helps start cleanly in suitable wood, while the hex washer head helps create a firm seated connection without relying on a small recess that can strip easily.

The result is a practical silver fastener for gutter work, repairs, and exterior hardware where the screw needs length, surface contact, and consistent driver engagement.

Where Contractors Use These Screws

How the Type 17 Point and Hex Washer Head Work Together

The Type 17 point has a cut design that helps the screw start into suitable wood backing and reduce driving resistance. This is helpful when working through gutter material, trim layers, brackets, or straps into compatible backing.

The 5/16 in hex drive gives the installer a strong outside-drive surface for steady torque transfer. The washer-style head spreads pressure across a wider area at the fastened surface, helping the head seat cleanly when driven correctly.

Best results come from using the right driver, holding the screw square, matching the fastener to the material, and stopping once the washer head is seated without crushing or distorting the surface.

Choose the Fastener That Matches the Job

Key Features

Quick Decision Summary

Choose these #12 x 2-1/2 in silver hex washer screws when the job needs a longer exterior fastener for gutters, fascia, trim, brackets, straps, panels, or visible hardware. The Type 17 point, ceramic silver coating, 5/16 in hex drive, washer-style head, and 250-piece quantity make them a practical service-truck and installation fastener.

Benefits Buyers Notice Fast

• 2-1/2 in length helps reach into suitable backing
• #12 sizing fits heavier exterior fastening needs
• Ceramic silver coating supports exposed exterior applications
• Type 17 point helps start cleaner in compatible wood backing
• Hex washer head supports controlled driving
• Washer-style head spreads pressure across the fastened surface
• 5/16 in hex drive works with common nut setters
• Useful for gutter accessories, straps, brackets, outlets, and repairs
• Useful for fascia, trim, light panels, and compatible exterior hardware
• Silver finish pairs well with metal hardware and non-white visible areas
• 250-piece pack helps reduce mid-job fastener shortages
• Good fit for installation trucks and repair kits
• Helps crews work efficiently across repeat fastening points
• Helpful for DIY exterior repairs when the application is compatible
• Available with pickup, local delivery, and nationwide shipping through checkout

Product Specifications

Who Uses These Screws?

Setup and Application Guide

1. Confirm the application is suitable for a #12 x 2-1/2 in silver exterior hex washer screw.
2. Check the material, backing, fastener spacing, edge distance, and any manufacturer requirements before installation.
3. Select a clean 5/16 in hex driver or nut setter that fully fits the screw head.
4. Mark fastener locations so the finished line looks straight and evenly spaced.
5. Use a pilot hole when the material, edge distance, wood density, or project instructions call for one.
6. Hold the screw square to the surface before driving.
7. Drive at controlled speed so the hex head stays engaged and the Type 17 point starts cleanly.
8. Stop when the washer head is seated firmly against the surface without crushing, distorting, or overdriving the material.
9. Inspect the connection for clean alignment, secure hold, and proper surface contact.
10. Replace damaged, stripped, bent, rusted, or poorly seated fasteners before the work is considered finished.

Contractor Tip

Keep a clean 5/16 in magnetic nut setter with the bag and replace worn drivers early. A tight-fitting driver protects the hex head, helps the washer seat evenly, and keeps long fastening runs moving without damaging the finish.

Frequently Asked Questions

Fastener Selection and Safety Notice

Fastener choice affects holding strength, surface appearance, corrosion performance, and material compatibility. Use these screws only where the length, finish, head style, and material requirements fit the application.

Wear eye protection when drilling or driving screws. Use ladder safety when fastening at gutter height. Do not overdrive the washer head, crush thin material, or use damaged drivers that can slip and mark the finish.

Professional installation is recommended when the project involves height, structural fastening, unfamiliar material, code requirements, or manufacturer-specific fastening instructions.

Need Help Matching Screws to the Gutter Job?

The right fastener depends on material, length, finish, driver size, surface visibility, and the connection being made. Use website chat to confirm fit before ordering.

Product Summary Box

The #12 x 2-1/2 in Silver Hex Washer Screw is a longer ceramic-coated exterior fastener for gutters, fascia, trim, straps, brackets, panels, and compatible light exterior hardware. The Type 17 point helps with cleaner starting in suitable wood, the 5/16 in hex drive supports efficient installation, and the 250-piece pack keeps crews stocked for repeated field work.