1" x 4" Steel Drip Edge Flashing 30GA Powder Coated
1" x 4" Steel Drip Edge Flashing 30GA Powder Coated
Couldn't load pickup availability
1 x 4 Steel Drip Edge | 30ga Powder Coated | 4 in Roof Leg | 1 in Face | Sold by Foot | Ships up to 8 ft
1 x 4 Steel Drip Edge Flashing 30ga - Sold by Foot
Give the roof edge a cleaner water break before the gutter ever gets blamed. This 30ga powder coated steel drip edge uses a 4 in roof leg and 1 in face for gutter installers who need wider roof-side coverage with a lower-profile front edge.
Order the Exact Footage Your Roof Edge Needs
This steel drip edge is sold by the linear foot. Enter the total footage needed for the roof edge, gutter run, eave, rake, fascia transition, repair section, or exterior edge detail.
Full section reference: this profile is commonly handled in 10 ft sections. Order quantity should still reflect total linear feet needed.
Shipping limit: shipped pieces are limited to 8 ft maximum length because long formed metal is costly to package and more likely to bend during transit.
Need longer pieces? Ask about pickup at GutterAll in Damascus, Oregon or local delivery where available.
Wider Roof-Side Coverage Without a Bulky Front Edge
The 4 in roof leg is the main advantage of this profile. It gives installers more roof-side coverage than compact 1.5 in, 2 in, or 3 in roof-leg profiles, while the 1 in face keeps the visible front edge lower and cleaner.
Best fit: compatible eave flashing, rake flashing, roof-edge flashing, gutter-edge flashing, fascia-side coverage, gutter replacement prep, exterior repair runs, and projects that need 4 in roof-side coverage with a smaller 1 in face.
A Cleaner Roof Edge Makes the Whole Gutter Job Look Better
A gutter can only catch water that reaches it cleanly. If the roof edge is missing the right metal, cut short, bent out of shape, or mismatched to the gutter line, runoff can still track toward fascia. This 1 x 4 steel drip edge gives crews a formed profile for roof-edge water control where wider roof-side coverage is needed.
Cleaner edge metal helps the finished gutter detail look intentional, measured, and ready for a professional handoff.
30ga Powder Coated Steel with Multiple Color Options
The 30ga steel construction gives contractors a formed metal profile for exterior roof-edge and gutter-adjacent work. The powder coated finish and multiple color options help coordinate the flashing with gutters, fascia, trim, siding, roof accents, and exterior color schemes.
Confirm color, piece length, roof-edge fit, fastener method, and surrounding material compatibility before ordering.
Fast Reasons This Profile Gets Picked
4 in Roof Leg
Provides wider roof-side coverage for compatible eave, rake, and roof-edge details.
Low 1 in Face
Creates a cleaner, lower-profile fascia-side edge compared with taller face options.
Powder Coated Steel
Supports exterior finish matching while keeping the profile specific to formed steel flashing work.
Measured Footage
Sold by foot so crews can order for the actual run instead of guessing around fixed pieces.
Profile Details
| Profile Area | Measurement | Why It Matters |
|---|---|---|
| Roof leg | 4 in | Gives wider roof-side coverage for compatible roof-edge details. |
| Face / drop | 1 in | Creates a lower fascia-side edge than 1.5 in or 2 in face profiles. |
| Profile bend | Default 120° bend shown | Defines the formed transition between the roof leg and face. |
| Material | 30ga steel | Provides a formed steel flashing profile for exterior roof-edge work. |
| Finish | Powder coated | Helps coordinate visible edge metal with exterior finish selections. |
Footage, Sections, and Delivery Lengths
| Detail | What to Know Before Ordering |
|---|---|
| Sold by foot | Order the total number of linear feet needed for the run. |
| 10 ft section reference | The product is referenced as 10 ft sections, but order quantity should reflect total linear footage. |
| Shipping length | Shipped pieces are limited to 8 ft maximum length. |
| Pickup | Longer pieces may be available for pickup at GutterAll in Damascus, Oregon. |
| Local delivery | Longer pieces may be available for local delivery depending on order size and route. |
Best-Fit Applications
| Application | Why It Fits |
|---|---|
| Roof-edge water control | The 4 in roof leg gives wider horizontal coverage for compatible eave and rake details. |
| Gutter installation prep | Useful when the gutter install also needs a clean roof-edge transition before the gutter line is finished. |
| Low-profile fascia edge | The 1 in face creates a lower front edge where taller face coverage is not needed. |
| Color-matched exterior work | Multiple colors help coordinate with gutters, fascia, trim, siding, and roof accents. |
| Repair and replacement runs | Sold-by-foot ordering helps match material quantity to measured job sections. |
1 x 4 Steel Drip Edge vs Smaller Roof-Leg Profiles
| 1 x 4 Steel Drip Edge | Smaller Roof-Leg Profiles |
|---|---|
| 4 in roof leg for wider roof-side coverage. | 1.5 in, 2 in, or 3 in roof legs may be better where less roof-side coverage is needed. |
| 1 in face for a lower-profile fascia-side edge. | 1.5 in or 2 in faces may be better when more vertical fascia-side coverage is needed. |
| 30ga powder coated steel construction. | Other profiles may use aluminum, galvanized steel, copper, or different coatings depending on project needs. |
| Sold by foot for measured job planning. | May be sold by foot, piece, or fixed-length section depending on item. |
Key Features
| Feature | Customer Benefit |
|---|---|
| 4 in roof leg | Gives wider roof-side coverage for compatible roof-edge details. |
| 1 in face | Keeps the fascia-side edge lower than taller face profiles. |
| 30ga steel | Provides a formed steel flashing profile for exterior roof-edge work. |
| Powder coated finish | Helps coordinate the visible edge with exterior finish selections. |
| Sold by foot | Lets crews order by measured project footage. |
| 8 ft maximum shipped length | Keeps shipped flashing pieces within a more practical long-item shipping size. |
Quick Product Summary
1 x 4 Steel Drip Edge Flashing made from 30ga powder coated steel for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior transition work. The profile shown has a 4 in roof leg, 1 in face, and default 120° bend. Sold by foot for measured project runs. The product is referenced in 10 ft sections; shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Job-Site Advantages
- 4 in roof leg gives wider roof-side coverage where compatible
- 1 in face creates a lower-profile fascia-side edge
- 30ga powder coated steel for formed exterior flashing work
- Multiple color options help match gutters, fascia, trim, siding, and roof accents
- Sold by foot for cleaner project quantity planning
- 10 ft section reference helps crews plan common run lengths
- Shipped pieces limited to 8 ft for practical long-item delivery
- Longer pieces may be available for pickup or local delivery
- Useful for eave, rake, roof-edge, fascia, gutter-adjacent, and trim transition details
- Helps guide roof runoff toward the gutter path when installed correctly
- Good option for gutter installers, roofers, remodelers, and exterior crews
- Helps create a cleaner finished appearance than improvised flat metal
- Practical for repair work, replacement work, and new exterior installations
- Works with compatible fasteners, sealants, roofing materials, and flashing methods
- Available from GutterAll in Damascus, Oregon
Product Specifications
| Specification | Details |
|---|---|
| Product Name | 1 x 4 Steel Drip Edge Flashing 30ga - Sold by Foot |
| Product Type | Steel drip edge flashing, roof-edge flashing, gutter-edge flashing, fascia flashing, eave flashing, rake flashing |
| Profile Size | 1 x 4 nominal profile |
| Roof Leg | 4 in |
| Face / Drop | 1 in |
| Profile Bend | Default 120° bend shown in profile drawing |
| Material | 30ga steel |
| Finish | Powder coated |
| Color Options | Multiple colors available; confirm current color options before ordering. |
| Sold As | Per linear foot |
| Ordering Basis | Order total linear feet needed for the project. |
| Full Section Reference | 10 ft section reference |
| Shipping Length Limit | Maximum 8 ft per shipped piece |
| Longer Pieces | Ask about longer pieces for pickup or local delivery before ordering. |
| Primary Uses | Roof-edge details, eave flashing, rake flashing, fascia protection, gutter-adjacent transitions, repair runs, and exterior water-control details |
| Best Fit | Projects needing a 4 in roof leg and 1 in face in a formed 30ga powder coated steel drip edge profile |
| Common Accessories | Compatible fasteners, sealant, snips, roof safety gear, underlayment, roofing materials, gutter components, and fascia repair materials as needed |
| Confirm Before Use | Roof-edge assembly, gutter position, fascia condition, overlap direction, fastening method, roof safety plan, color match, and whether a different flashing profile is required |
| Not Intended For | Applications requiring gutter apron, wall step flashing, metal roof-specific flashing, tile roof flashing, structural support, or installation that conflicts with local requirements or manufacturer instructions |
| Expected Service Life | Varies by coating condition, climate exposure, installation quality, cut edges, fastener choice, sealant use, drainage conditions, maintenance, and compatibility with surrounding materials. |
Who Uses This Steel Drip Edge?
Gutter Installers and Exterior Crews
- Preparing roof-edge details before or during gutter installation
- Using a 4 in roof leg where the roof edge needs wider roof-side coverage
- Ordering exact footage for repair, replacement, and project runs
Roofers, Remodelers, and Builders
- Using a 30ga powder coated steel drip edge profile for compatible roof-edge layouts
- Choosing multiple color options where exterior finish coordination matters
- Planning order footage around eaves, rakes, fascia runs, and repair sections
Experienced DIY Buyers
- Replacing compatible roof-edge flashing near gutter and fascia details
- Ordering smaller project quantities by the foot
- Using 8 ft or shorter shipped pieces for manageable handling
Installation Planning Guide
- Measure the total eave, rake, roof-edge, fascia, repair, or gutter-adjacent transition footage needed.
- Order the total number of linear feet required.
- Plan around the 10 ft section reference when estimating pickup or local delivery needs.
- For shipped orders, plan around an 8 ft maximum piece length.
- Confirm the selected color works with the gutter, fascia, roof, siding, and trim.
- Confirm whether the 4 in roof leg and 1 in face fit the actual roof-edge detail.
- Use proper flashing sequence, overlap direction, drainage clearance, and compatible surrounding materials.
- Use compatible fasteners and sealants for the roofing and gutter system.
- Check fit and water path before fastening the full run.
- Verify runoff is directed outward and toward the gutter path without running behind the fascia.
Installation and Ordering Notice
This flashing is sold per linear foot. The product is referenced as 10 ft sections. Shipped pieces are limited to 8 ft maximum length because long formed metal is costly to ship and more likely to bend or damage during transit.
For longer pieces, use pickup or ask about local delivery availability before ordering.
Use proper flashing sequence, overlap, drainage clearance, compatible fasteners, and sealant practices for the roof and gutter system being worked on.
Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height. Cut metal can be sharp.
Need Help Planning Footage, Color, or Cut Lengths?
Use website chat for help planning total footage, shipped cut lengths, pickup options, local delivery availability, and whether this 1 x 4 steel drip edge profile is the right fit for the roof-edge detail.
Order by Footage
Order the total linear feet needed for the project.
10 ft Section Reference
Useful for pickup, local delivery, and project planning.
Ships up to 8 ft
Shipped pieces are cut to 8 ft or less for practical delivery.
Product Summary Box
1 x 4 Steel Drip Edge Flashing made from 30ga powder coated steel for eave, rake, roof-edge, fascia, gutter-adjacent, and exterior transition work. The profile shown has a 4 in roof leg, 1 in face, and default 120° bend. Sold by foot for exact project footage. The product is referenced in 10 ft sections; shipped pieces are limited to 8 ft maximum length because long formed metal is expensive to ship. Longer pieces may be available for pickup or local delivery.
Frequently Asked Questions
What is 1 x 4 steel drip edge flashing used for?
It is used for compatible eave, rake, roof-edge, fascia, and gutter-adjacent details where a steel drip edge profile with a 4 in roof leg and 1 in face fits the project.
How is this flashing ordered?
It is sold by the foot. Order the total linear footage needed for the project. The product is referenced as 10 ft sections, while shipped pieces are limited to 8 ft maximum length.
Can pieces longer than 8 ft be shipped?
No. Shipped pieces are limited to 8 ft because long formed metal is costly to package and more likely to bend during transit. Longer pieces should be arranged through pickup or local delivery where available.
Is this the same as gutter apron?
No. This is steel drip edge flashing. Gutter apron is a different roof-edge profile and may be better for certain roof-to-gutter details.
What is GutterAll's return policy for this product?
GutterAll offers a 30-day return window for unused standard products in original condition. Cut, bent, scratched, installed, altered, custom-length, custom-color, or customer-damaged flashing may not be returnable unless defective. Customers should confirm footage, piece length, color, profile, pickup, delivery, and shipping limits before ordering. Return shipping or return transport is the buyer's responsibility unless the return is due to defect or fulfillment error. Refunds are processed within 5 to 7 business days after approval and receipt.
What fulfillment options are available?
In-store pickup at GutterAll in Damascus, Oregon, local delivery where available, and shipping are available depending on selected piece length. Shipped pieces are limited to 8 ft. Typical small-order handling is 1 to 2 business days, and transit time is typically 3 to 7 business days depending on destination and carrier.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
