2x3 Aluminum Downspout Elbow 75 Degree - Style B

Back Crimp Configuration | .019 Gauge Aluminum | Corrugated Ribbed | 31 Colors | Contractor and DIY | Damascus OR

CONTRACTOR LOCAL PICKUP - DAMASCUS, OREGON

Professional-grade 2x3 aluminum downspout elbow with sharp 75 degree angle and Style B back crimp configuration for seam-to-wall downspout systems and tight space installations.

Contractor Pickup and Shipping:

Local Pickup: 19759 SE Sunnyside Rd, Damascus, OR 97089

Hours: Mon-Fri 7am-4pm, Sat 9am-2pm PST

Shipping: Standard shipping available nationwide

Volume Orders: Call (503) 850-6784 for contractor pricing

Style B Configuration - Back Crimp Design

Style B elbows have the crimped end on the back face of the fitting. This configuration is required when your downspout seam faces the wall. Using Style A fittings on a Style B system creates misaligned joints and leak points. Check your existing downspouts: if the seam faces the wall, you need Style B. If the seam faces outward, you need Style A.

Key Features:

• Sharp 75 Degree Angle: Aggressive angle for tight spaces and deep fascia transitions
• Style B Back Crimp: Required for seam-to-wall downspout systems
• Corrugated Ribbed Construction: Enhanced structural strength at critical bend point
• .019 Gauge Aluminum: Industry-standard thickness for durability
• 31 Factory Colors: Match any gutter system or exterior
• Baked Enamel Finish: UV-resistant coating for long-lasting color
• 2x3 Inch Profile: Fits all standard residential downspout systems
• Rust-Free: No corrosion, no maintenance, decades of service

Technical Specifications:

When to Use 75 Degree Style B:

Use this elbow when your system has seam-to-wall orientation AND you need a sharp angle for deep fascia boards (8 inches or wider), wide roof overhangs, limited soffit space, or compact routing. The 75 degree angle creates aggressive directional changes where standard 45 degree elbows cannot make the required transition.

Style A vs Style B:

Style A (Front Crimp): Crimped end on front face. Use when downspout seam faces outward (away from wall). Most common residential configuration.

Style B (Back Crimp): Crimped end on back face. Use when downspout seam faces wall. Required for matching existing Style B systems. Do not mix Style A and Style B fittings in the same system.

31 Factory Colors Available

30 Deg. White, 80 Deg. White, Black, Musket Brown, Beaver Brown, Clay, Dark Bronze, Light Bronze, Royal Brown, Rustic Copper, Safari Beige, Tuxedo Gray, Wicker, Almond, Antique Ivory, Buckskin Brown, Classic Cream, Colonial Blue, Colonial Gray, Colonial Red, Copper Metallic, Dove Gray, Eggshell, Forest Green, Heritage Cream, Herringbone, Linen, Paint Grip Metallic, Raffia Beige, Copper, Galvalume Plus

Common Applications:

• Matching Existing Style B Systems: All fittings must match for proper alignment
• Deep Fascia Transitions: 8+ inch fascia boards need sharp angles
• Seam-to-Wall Orientation: Back crimp aligns with inward-facing seams
• Commercial Buildings: Many commercial systems use Style B configuration
• Repair and Replacement: Seamless integration with existing Style B installations
• Compact Soffit Areas: Limited space with Style B system requirements

Also Known As:

Downspout elbow, Type B elbow, gutter elbow, conductor elbow, downspout bend, back crimp elbow, drain pipe fitting, gutter connector, gutter bend.

Installation Guide:

1. Verify Style B requirement - confirm seam faces wall before installing
2. Assess installation - measure fascia depth to confirm 75 degree is needed
3. Select color from 31 factory options
4. Connect to gutter outlet with back crimp facing wall
5. Measure and cut offset section between elbows
6. Connect second elbow to redirect flow downward
7. Verify all crimps face correctly for Style B orientation
8. Secure connections with 2-3 stainless steel sheet metal screws per joint
9. Install wall brackets every 3-4 feet
10. Test drainage and check for leaks

Custom Orders Available

Need bulk quantities, specialty colors, or complete Style B component packages? Contact us for contractor pricing on high-volume orders, mixed angle assortments, and custom configurations.

Safety Notice

Professional installation recommended for multi-story buildings. Always use proper fall protection when working at heights. Ensure ladder stability for installations above 6 feet.

GutterAll.com - Damascus, Oregon

Professional Gutter Supplies for Contractors and DIY