6 Inch Bronze Star Drive Screw | Type 17 Exterior Fastener

Stop Fighting Long Screws That Slip, Wander, or Split the Material

Long exterior screws can waste time when the bit slips, the point walks across the surface, the head sits proud, or the wood starts to split before the fastener is seated. On gutter and fascia work, those small problems can turn into crooked hardware, damaged trim, slower installs, and callbacks.

This 6 inch bronze star drive screw is made for cleaner control: the star/Torx recess helps reduce cam-out, the Type-17 point helps start faster, the flat head with nibs helps seating, and the aggressive thread design helps pull exterior wood connections together.

Cleaner Starts, Better Drive Control, Stronger Jobsite Flow

Made for the Fastening Jobs That Punish the Wrong Screw

The 6 Inch Bronze Star Drive Construction Screw is a long exterior fastener for contractors and homeowners who need more control than a standard Phillips or square-drive screw can provide. The image shows a bronze/gold screw with a flat head, star drive, pointed self-starting tip, and aggressive thread profile, matching the uploaded listing’s description of a 6 inch bronze star drive construction screw with Type-17 point and flat head nibs.

For gutter installers, this fastener is useful when longer holding power is needed around fascia backing, wood blocking, structural support points, bracket preparation, and exterior wood repairs connected to gutter work. For general contractors and DIY homeowners, it fits many exterior wood fastening needs across decking, fencing, siding, repairs, and construction assemblies when the material and load requirements match the fastener.

The practical value is speed with control. The star drive helps reduce cam-out. The Type-17 point helps start the fastener without wandering. The flat head with nibs helps seating. The bronze exterior coating gives the screw a finish suited for outdoor wood applications when paired with compatible materials.

GutterAll in Damascus, OR supports gutter crews, exterior contractors, and DIY homeowners with fastener selection, application guidance, in-store pickup, local delivery, and nationwide shipping. Website chat is the fastest way to confirm whether this screw is the right fit for the material, length, coating, and jobsite conditions.

A Better Fastener Saves Time Before the Screw Is Fully Seated

The wrong screw often announces itself early: the point skates, the drive strips, the head sits high, the bit wears out, or the wood splits near the edge. That creates rework before the install even reaches the next fastener.

This bronze star drive screw is positioned for those moments where control matters. The drive recess helps hold the bit. The Type-17 point helps start the hole. The under-head nibs help the head seat more cleanly. The thread design helps reduce drag and pull the connection together when the screw is used in suitable materials.

The buying decision is simple: choose this screw when the project needs a long exterior wood fastener with better drive engagement, cleaner starting, and a bronze-coated finish. Choose a different fastener when code, load rating, substrate, metal-to-metal fastening, masonry, or manufacturer requirements call for a specific alternative.

Where Contractors Put It to Work

How the Screw Drives Cleaner

The star/Torx recess gives the driver bit more contact points than a Phillips recess, helping reduce cam-out and stripped heads. The Type-17 point is designed to start into wood more cleanly and reduce walking. The aggressive thread pulls into the material, while the knurled shoulder and V-cut thread notches help reduce drag during installation.

The flat head with nibs helps the head seat into suitable wood surfaces. For best results, the screw should be paired with the correct driver bit, proper drill speed, compatible material, and the project’s required fastening pattern.

Choose the Right Fastener for the Connection

Key Features

Quick Decision Summary

Choose the 6 Inch Bronze Star Drive Construction Screw when the job needs a long exterior wood fastener with star-drive control, Type-17 starting, flat head seating, and bronze-coated exterior positioning. Confirm material compatibility, load requirements, spacing, pilot-hole needs, and code requirements before using it in structural or engineered connections.

Benefits Crews Notice Fast

• Helps reduce bit slip compared with weaker drive styles
• Star/Torx recess supports cleaner torque transfer
• Type-17 point helps start into suitable wood without wandering
• Flat head with nibs supports cleaner seating
• Aggressive threads help pull exterior wood connections together
• 6 inch length supports deeper fastening needs
• Bronze finish fits exterior wood applications and darker hardware palettes
• Useful for fascia backing and gutter-related wood support tasks
• Useful for decks, fences, siding, and exterior repair projects
• Helps reduce wasted screws caused by stripped drive recesses
• Helps reduce wasted motion during repeated contractor fastening
• Pairs well with the correct star-drive bit for faster installation flow
• Works for contractors needing consistent fastener control across bulk tasks
• Helpful for DIY homeowners who want a cleaner-driving exterior screw
• Supported by GutterAll fastener guidance through website chat

Product Specifications

Who Keeps These Screws on the Job List?

Setup and Application Guide

1. Confirm the project is a compatible wood fastening application and not a structural, masonry, or metal fastening task that requires a different specified fastener.
2. Check the required fastener length, embedment depth, spacing, edge distance, coating compatibility, and local code or manufacturer requirements.
3. Select the correct star/Torx driver bit that fully seats in the screw recess without wobble.
4. Inspect the screw for damaged threads, damaged head recess, coating defects, or bent shank before use.
5. Mark the fastening location and keep appropriate edge distance to reduce splitting risk.
6. Set the Type-17 point square to the work surface before applying drill pressure.
7. Drive at controlled speed so the screw starts cleanly and does not overheat, strip, or wander.
8. Allow the flat head and nibs to seat properly without overdriving below the surface unless the application specifically calls for it.
9. Check that the connected material is drawn tight and that the head is seated cleanly.
10. Inspect the finished connection and use additional approved fasteners or different fastener types when the project plan, load, or code requires them.

Contractor Tip

For repeated gutter, fascia, and exterior wood fastening, crews should keep the matching star-drive bits with the screw box. A fully seated bit reduces stripped heads, protects the recess, and keeps long screws driving straighter with less wasted motion.

Frequently Asked Questions

Fastener Selection and Safety Notice

Fastener choice affects holding strength, corrosion performance, material compatibility, and code compliance. This screw should only be used where its length, coating, drive type, point type, and material are appropriate for the application.

Eye protection is recommended when driving screws. Users should avoid overdriving, edge splitting, mismatched driver bits, and using the screw in masonry, concrete, metal-to-metal fastening, or engineered structural connections unless the project specifications allow it.

Professional guidance is recommended when the project involves structural loads, code-required fasteners, engineered connectors, treated lumber compatibility, or manufacturer-specific fastening schedules.

Need Help Matching the Screw to the Job?

A long exterior fastener works best when the material, embedment depth, coating, driver bit, and load requirements all match. Website chat is the fastest way to confirm fit before ordering.

Product Summary Box

The 6 Inch Bronze Star Drive Construction Screw is a long exterior wood fastener with a bronze finish, star/Torx drive, Type-17 point, flat head with nibs, and aggressive thread design. It helps contractors and homeowners reduce slipping bits, wandering starts, stripped heads, and slow fastening on compatible fascia, gutter, deck, fence, siding, and exterior wood projects.