6 in Half Round Shank and Circle Hanger - Copper Bronze

Important Diagram Notice: This Listing Is for the Hanger Only

The installation diagram is for reference only. It shows how a cornice-mounted shank and circle hanger works in a gutter assembly, but the other components shown in the diagram are not included unless separately added in Shopify.

• Included product: 6 in half round shank and circle hanger in copper bronze finish.
• Sold separately: gutter sections, fasteners, screws, nut and bolt hardware if not included in the Shopify variant, extension shank, fascia/cornice material, sealant, outlets, end caps, miters, downspouts, and accessories.
• Steep roof note: roof pitch of 8/12 or greater may require an extension shank.
• Fit check: confirm gutter size, roof pitch, fascia/cornice condition, clearance, spacing, and accessory needs before ordering.

Key Benefits at a Glance

Half Round Gutters Need the Right Hanger — Not Just Any Bracket

A half round gutter run can look premium and still fail the install if the hanger style is wrong, the spacing is too wide, the roofline clearance is ignored, or the installer forgets that steep roof pitches may need an extension shank.

This copper bronze shank and circle hanger helps solve the fit and appearance problem: it provides a visible traditional support for 6 in half round gutters, mounts to fascia or cornice, and gives installers a clearer way to plan spacing, clearance, and roof-pitch conditions before the gutter goes up.

A Classic Support Detail for Premium Half Round Gutter Runs

This listing is for a 6 in Half Round Shank and Circle Hanger in copper bronze finish. The uploaded product information identifies the hanger as an external mount, cornice/fascia mounted shank and circle system for 6 in half round gutters, with recommended spacing of 24 to 30 in, a listed weight of 0.34 lb, 3/4 in clearance from the extended roof line, and a steep-roof note that roof pitches of 8/12 or greater require an extension shank.

For gutter installers, the value is control. The shank mounts to the wood fascia or cornice, the circle cradles the half round gutter, and the visible bracket style helps the finished system look intentional on historic homes, custom homes, copper gutter projects, bronze gutter systems, and architectural exterior work.

This is not a universal hanger for every gutter profile. It should be used where the job calls for a 6 in half round external mount hanger and where the fascia, cornice, roof pitch, fasteners, clearance, hanger spacing, and accessory package are appropriate for the project.

GutterAll in Damascus, OR supports gutter installers, cleaning contractors, remodelers, and capable DIY buyers with half round gutter parts, hanger selection, extension shank planning, local pickup, local delivery, nationwide shipping, and website chat support before checkout.

The Pain Point: A Visible Gutter System Exposes Every Wrong Part

Half round gutters are often chosen because the finished look matters. That also means the hanger choice is visible. A mismatched bracket, wrong spacing, weak fascia attachment, missing extension shank, or poor roofline clearance can make the job look unfinished and create performance problems.

This shank and circle hanger is positioned for that exact problem: it gives installers a classic support method for 6 in half round gutter runs while keeping the fit decisions clear before installation begins.

The strongest buying decision is not just choosing the copper bronze finish. It is confirming gutter size, roof pitch, fascia condition, fasteners, hanger spacing, extension shank needs, and whether the accessories shown in the diagram must be ordered separately.

Contractor Applications

How the Shank and Circle Hanger Works

The shank mounts to the fascia or cornice with appropriate fasteners. The circle cradles the half round gutter and supports the gutter body from below. The hanger spacing, fastener choice, gutter slope, and roofline clearance all affect the final installation.

The diagram shows the circle, shank, roofline clearance, fasteners, wood cornice, nut and bolt location, and extension roof line for installation reference. The diagram should not be read as a bundle photo. Components other than the listed hanger are sold separately unless specifically added in Shopify.

For roof pitches of 8/12 or greater, the diagram note states that an extension shank is required. Extension shanks are separate accessories and should be confirmed before checkout.

Choose the Right Half Round Support Setup

Key Features

Summary

Choose this 6 in half round shank and circle hanger when the project needs a traditional copper bronze external support for compatible half round gutters. Confirm hanger spacing, fascia/cornice condition, fastener choice, gutter slope, clearance, roof pitch, and whether extension shanks or diagram accessories need to be ordered separately.

Key Benefits

• Supports compatible 6 in half round gutter systems
• Visible shank and circle style suits traditional exterior architecture
• Copper bronze finish coordinates with premium metal gutter projects
• Useful for fascia and cornice-mounted half round installations
• Helps installers plan hanger spacing before ordering
• 24 to 30 in spacing guidance supports quantity estimates
• 3/4 in clearance note helps avoid roofline interference
• 8/12 pitch note helps flag extension shank needs early
• External support style avoids a hidden-hanger look on visible half round systems
• Useful for restoration, custom home, copper, bronze, and architectural gutter projects
• Supports more deliberate planning than guessing with generic brackets
• Helps match hanger choice to the gutter profile and mounting surface
• Works as part of a complete half round system when paired with proper accessories
• Small enough for pickup, delivery, or standard shipping through Shopify checkout
• Supported by GutterAll fit guidance through website chat

Product Specifications

Who Uses This Hanger?

Setup and Installation Planning Guide

1. Confirm the gutter system is 6 in half round and compatible with shank and circle hangers.
2. Inspect the fascia or cornice to confirm it is solid enough to support the hanger and gutter load.
3. Measure roof pitch and determine whether an extension shank is needed, especially at 8/12 pitch or greater.
4. Plan hanger spacing, typically 24 to 30 in based on project conditions and local requirements.
5. Confirm required fasteners, nut/bolt hardware, extension shanks, and accessories before installation.
6. Mark hanger locations along the gutter run while maintaining proper slope for drainage.
7. Secure the shank to the fascia or cornice with appropriate fasteners for the substrate.
8. Attach or position the circle hanger so it properly cradles the half round gutter.
9. Set the gutter into the circle and confirm roofline clearance, slope, and support before final tightening.
10. Inspect all hangers after installation and recheck after water testing or the first heavy rain event.

Pro Tip

Before ordering, check the roof pitch and take a photo of the fascia/cornice from the side. The product may fit the gutter size, but the roofline can still require an extension shank to maintain proper clearance.

Frequently Asked Questions

Installation and Safety Notice

Gutter installation may require ladder work, roofline work, and fastening into fascia or cornice material. Use proper ladder safety, fall protection where required, gloves, eye protection, and safe tool practices.

The hanger must be fastened into sound material. Weak fascia, rotten cornice boards, poor fastener choice, wrong spacing, or missing extension shanks can reduce support and create installation problems.

Professional installation is recommended when working at height, dealing with steep roof pitches, copper/bronze systems, historic structures, or questionable fascia conditions.

Need Help Confirming Hanger Fit or Extension Shank Needs?

The right hanger setup depends on gutter size, roof pitch, fascia condition, spacing, clearance, fasteners, and whether the diagram accessories need to be ordered separately. Website chat is the fastest way to confirm before checkout.

Product Summary Box

The 6 in Half Round Shank and Circle Hanger in copper bronze finish is an external mount support for compatible 6 in half round gutter systems. It is built for fascia or cornice-mounted layouts where a traditional visible hanger style is desired. Other installation diagram components are sold separately unless specifically added in Shopify.