7 Inch Rafter Angle Square Yellow Plastic Speed Square Damascus Oregon
7 Inch Rafter Angle Square Yellow Plastic Speed Square Damascus Oregon
Couldn't load pickup availability
7" Rafter Angle Square - Yellow Plastic Speed Square
Degree Markings | Rafter Tables | Saw Guide Fence | Lightweight Plastic | Damascus Oregon
IN STOCK - SAME-DAY PICKUP OR FAST SHIPPING
The 7" Rafter Angle Square is a compact measuring and marking tool for gutter contractors, roofers, and framing professionals. This yellow plastic speed square features degree markings from 0 to 90 degrees, common cut and hip/valley rafter tables, and a raised fence edge for guiding circular saw cuts. The lightweight 7-inch size fits easily in a tool belt or apron pocket for quick access on ladders and rooftops. Ideal for marking gutter hanger spacing, checking fascia angles, laying out rafter cuts, and verifying square corners. GutterAll stocks this rafter angle square at the Damascus, Oregon warehouse with same-day pickup available or fast shipping to job sites.
7" Size | 0-90 Degree Scale | Rafter Tables | Saw Guide Fence | Yellow Plastic
Key Benefits at a Glance
Fits in tool belt for ladder work.
Full range angle measurements.
Common cut and hip/valley calculations.
Raised edge guides circular saw cuts.
Why Gutter Contractors Choose the 7" Rafter Angle Square
Gutter installation requires angle measurements at fascia boards, corners, and mitered joints - and the 7" rafter angle square is a fast way to mark cuts on the job site. The compact 7-inch size fits in a tool belt or apron pocket, keeping it accessible when working on ladders or rooftops. The raised fence edge hooks over board edges to quickly mark perpendicular lines for hanger placement or check that fascia boards are square. The 0 to 90 degree scale allows contractors to measure and transfer angles for mitered corners, end caps, and custom gutter transitions. The rafter tables provide pitch calculations for matching roof slope when installing gutter systems. The bright yellow color makes the tool easy to spot on busy job sites. Lightweight plastic construction keeps weight down for all-day use. GutterAll stocks this measuring tool at the Damascus, Oregon warehouse with same-day pickup available or fast shipping to job sites.
7" Rafter Angle Square - Damascus, Oregon:
The 7" Rafter Angle Square (also known as a speed square, rafter square, triangle square, angle finder, or carpenter's square) is available at GutterAll in Damascus, Oregon. This compact yellow plastic measuring tool features degree markings, rafter tables, and a saw guide fence for marking angles and guiding cuts. Gutter contractors, roofing professionals, framing carpenters, general contractors, and DIY installers use this speed square for marking hanger spacing, checking fascia angles, laying out rafter cuts, and verifying square corners. GutterAll stocks the 7" rafter angle square at the Damascus, Oregon warehouse with same-day pickup or fast shipping to job sites.
| Product | Material | Availability | Fulfillment |
| 7" Rafter Angle Square | Yellow Plastic | In Stock | Pickup or Shipping |
Location: GutterAll - 19759 SE Sunnyside Rd, Damascus, Oregon 97089 - Mon-Fri 7am-4pm, Sat 9am-2pm PST
Phone: (503) 850-6784
Email: sales@gutterall.com
Contractor Pricing: Volume discounts available on tools and supplies
Understanding Speed Square Markings:
The 7" rafter angle square includes multiple measurement scales for different applications:
| Scale/Feature | Location | Purpose |
|---|---|---|
| Degree Scale (0-90) | Hypotenuse edge | Measure and mark any angle from 0 to 90 degrees |
| Common Cut Table | Body face | Rafter length per foot of run for common pitches |
| Hip/Valley Table | Body face | Hip and valley rafter calculations |
| Inch Scale | Long edges | Quick linear measurements up to 7 inches |
| Fence Edge | Short leg | Hooks over board edge for square lines and saw guide |
| Pivot Point | Corner notch | Reference point for angle measurements |
Speed Square Applications for Gutter Contractors:
The 7" rafter angle square provides measurement capabilities for gutter installation and related work:
| Application | How the Square Helps | Key Feature Used |
|---|---|---|
| Marking Hanger Spacing | Draw perpendicular lines on fascia | Fence edge for square marks |
| Mitered Gutter Corners | Mark 45-degree cuts for inside/outside corners | Degree scale at 45 |
| Checking Fascia Square | Verify fascia is perpendicular to rafters | 90-degree corner |
| Matching Roof Pitch | Determine slope for proper gutter fall | Common cut table |
| Cutting Downspout Angles | Mark angle cuts for elbows and offsets | Degree scale |
| Circular Saw Guide | Guide saw for straight crosscuts | Fence edge as guide |
Plastic vs Aluminum Speed Squares - Material Comparison:
Understanding the differences between speed square materials helps contractors choose the right tool for each application:
| Factor | Plastic Speed Square (This Product) | Aluminum Speed Square |
|---|---|---|
| Weight | Very lightweight | Heavier |
| Cost | Budget-friendly option | Higher cost |
| Surface Marking | Will not scratch surfaces | Can scratch finished surfaces |
| Durability | Good for general use | More durable long-term |
| Heat Resistance | Avoid contact with hot saw blades | Heat resistant |
| Best For | General measuring, marking, budget tool kits | Heavy daily use, saw guiding |
Contractor Tip: The plastic speed square is a practical budget-friendly option for general measuring and marking tasks. Keep it in your tool belt for quick angle checks and hanger layout. For heavy saw guiding work, some contractors prefer aluminum.
Mark angles, guide saw cuts, and verify square with the 7" Rafter Angle Square - the compact measuring tool that fits in a tool belt pocket for quick access on ladders and rooftops. Also known as a speed square, rafter square, triangle square, angle finder, or carpenter's square - this yellow plastic tool features a 0-90 degree scale, common cut and hip/valley rafter tables, and a raised fence edge for guiding cuts. The lightweight 7-inch size provides measuring capabilities without bulk. GutterAll stocks the 7" rafter angle square at the Damascus, Oregon warehouse with same-day pickup or fast shipping. Contact (503) 850-6784 or email sales@gutterall.com to order.
Key Benefits:
- Compact 7-Inch Size: Fits in tool belt or apron pocket for quick access on ladders
- 0-90 Degree Scale: Full range angle measurement along hypotenuse edge
- Common Cut Rafter Table: Pitch calculations for common roof slopes
- Hip/Valley Rafter Table: Hip and valley rafter length calculations
- Raised Fence Edge: Hooks over board edge for square lines and saw guide
- Yellow Plastic Construction: Lightweight and easy to spot on job sites
- Inch Scale Markings: Quick linear measurements up to 7 inches
- Pivot Point Notch: Reference point for angle measurements
- Very Lightweight: Minimal weight for all-day carrying
- Budget-Friendly: Cost-effective measuring tool option
- High Visibility Color: Bright yellow easy to locate in tool bags and on job sites
- Multi-Function Tool: Angle marking, square checking, and saw guiding in one tool
- Will Not Scratch: Plastic construction will not scratch finished surfaces
- Cutout Slots: Reduced weight design with center cutouts
- Same-Day Pickup: In stock at Damascus, Oregon warehouse
Product Specifications:
| Product Type: | Rafter Angle Square / Speed Square / Triangle Square |
| Size: | 7 inches (compact/portable size) |
| Material: | Plastic |
| Color: | Yellow (High Visibility) |
| Degree Scale: | 0 to 90 degrees |
| Rafter Tables: | Common Cut and Hip/Valley tables included |
| Fence Edge: | Raised lip for hooking over board edges and saw guide |
| Linear Measurement: | Inch scale markings on edges |
| Cutouts: | Two slots for reduced weight |
| Primary Applications: | Angle marking, rafter layout, saw guide, square verification |
| Weight: | Very lightweight (plastic construction) |
| Portability: | Fits in standard tool belt pocket or apron |
| Expected Service Life: | With proper care, the plastic speed square provides reliable service for general measuring and marking tasks; store in tool belt or protected location to prevent cracking; avoid dropping on hard surfaces; keep away from extreme heat and direct contact with hot saw blades; periodically verify accuracy by comparing to a known reference; replace if cracked or warped |
| Condition: | New |
Common Names - Same Tool:
This measuring tool is known by several names in the construction industry:
Rafter Angle Square
Primary technical term
Speed Square
Common industry nickname
Triangle Square
Shape-based descriptor
Rafter Square
Application-focused name
Angle Finder
Function-based term
Carpenter's Square
Trade-associated name
Who Uses the 7" Rafter Angle Square?
Gutter Contractors
- Marking hanger spacing on fascia
- Checking fascia board angles
- Laying out mitered corner cuts
- Verifying square at corners
- Measuring roof pitch for slope
- Guiding cuts on job site
Contractor Benefit: The compact 7" size fits in a tool belt for quick access when working on ladders and rooftops. Useful for marking cuts and checking angles during gutter installation.
Roofing and Framing Professionals
- Rafter cut layout and marking
- Pitch calculation and verification
- Stair stringer layout
- Circular saw crosscut guide
- Square line marking on lumber
- Angle transfer between pieces
Professional Benefit: The rafter tables provide pitch calculations, and the raised fence edge can be used as a saw guide for crosscuts. Multiple functions in one compact tool.
Common Applications:
| Application | Square Function | Key Benefit |
| Gutter Hanger Layout | Mark perpendicular lines on fascia | Consistent hanger spacing |
| Mitered Corners | Mark 45-degree cut lines | Accurate corner joints |
| Rafter Layout | Calculate and mark rafter cuts | Proper roof framing |
| Saw Guide | Guide saw for crosscuts | Straight cuts |
| Square Verification | Check 90-degree corners | Ensures square assemblies |
| Pitch Measurement | Determine roof slope angle | Match gutter fall to roof |
How to Use the 7" Rafter Angle Square:
- Mark Square Lines: Hook the raised fence edge over the board edge. The long edge of the square is now perpendicular to the board. Draw a line along this edge to mark a square crosscut line for hanger placement or lumber cuts.
- Mark Angles: Position the fence edge against the board edge. Pivot the square until the desired degree marking on the hypotenuse aligns with the board edge. Draw a line along the hypotenuse to mark the angle for mitered corners or angled cuts.
- Find Roof Pitch: Place the fence edge along a rafter or the roof surface. The degree reading where the plumb line intersects the scale indicates the roof pitch angle. Use this to set proper gutter slope.
- Use Rafter Tables: Locate the roof pitch (rise over run) in the Common Cut table to find the rafter length per foot of horizontal run. Multiply by the total run to calculate full rafter length. Use Hip/Valley table for hip and valley rafters.
- Guide Saw Cuts: Hook the fence over the board edge and hold firmly. Run the circular saw shoe along the hypotenuse edge for a straight crosscut. Note: Avoid prolonged contact between the plastic and a hot saw blade.
- Mark Stair Stringers: Use the rafter tables and angle markings to lay out stair stringer cuts. The common cut table helps calculate rise and run for consistent stair layout.
- Check Square Corners: Place the square in a corner with the fence and short leg against adjacent surfaces. If both edges contact fully, the corner is square at 90 degrees. Use for checking fascia joints, framing corners, or gutter assemblies.
- Transfer Angles: Measure an existing angle by placing the square against it and reading the degree scale. Then use the same degree reading to mark the matching angle on another piece for accurate duplication.
Pro Tip: Keep the speed square in a dedicated tool belt pocket for quick access. The bright yellow color makes it easy to spot if set down on a job site. Plastic construction will not scratch finished surfaces when marking.
Frequently Asked Questions:
Q: What is this speed square made of?
This speed square is made of plastic with molded-in measurement markings. The plastic construction makes it lightweight and will not scratch finished surfaces when marking.
Q: How do gutter contractors use a speed square?
Gutter contractors use the speed square to mark perpendicular lines for hanger spacing, check that fascia boards are square, lay out mitered corner cuts at 45 degrees, determine roof pitch for proper gutter slope, and mark straight cuts on the job site.
Q: What are the rafter tables used for?
The rafter tables provide calculations for rafter length based on roof pitch. The Common Cut table shows the rafter length per foot of horizontal run for standard rafters. The Hip/Valley table provides the same information for hip and valley rafters.
Q: Can I use this as a circular saw guide?
Yes, the raised fence edge hooks over the board and holds the square in place. Run the saw shoe along the hypotenuse edge for a crosscut. Note that prolonged contact with a hot saw blade should be avoided with plastic squares.
Q: Why is the square yellow?
The bright yellow color provides high visibility on job sites, making the tool easy to locate in a tool bag, on a workbench, or if set down on a roof. This helps prevent lost tools and saves time searching.
Q: Is same-day pickup available?
Yes. The 7" rafter angle square is in stock at the Damascus, Oregon warehouse with same-day pickup available. Business hours are Monday-Friday 7am-4pm and Saturday 9am-2pm PST. Call (503) 850-6784 to confirm availability. Fast shipping also available.
Care and Usage Notice
HANDLE WITH CARE. The plastic speed square is a measuring tool for general use. Avoid dropping on hard surfaces, which can crack the plastic. Store in a tool belt pocket or protected location. Avoid extreme heat and prolonged contact with hot saw blades, which can melt or warp plastic. Periodically check accuracy by comparing the square corner to a known accurate reference. If the square becomes cracked or warped, replace it to ensure accurate measurements.
In Stock - Same-Day Pickup or Fast Shipping
Order the 7" Rafter Angle Square from GutterAll today.
In stock at the Damascus, Oregon warehouse with same-day pickup available. The compact 7" size fits in a tool belt for quick access on ladders and rooftops. Fast shipping to job sites nationwide. Pick up alongside your gutter materials and installation supplies. Volume pricing available for contractors ordering multiple tools. Contact GutterAll to discuss your tool and supply needs.
Contact GutterAll: (503) 850-6784
Or email: sales@gutterall.com
GutterAll - 7" Rafter Angle Square
Compact measuring tool that fits in a tool belt for quick angle marking and square verification on job sites. The 7" Rafter Angle Square features a 0-90 degree scale, common cut and hip/valley rafter tables, and a raised fence edge for guiding cuts. Yellow plastic construction provides high visibility and lightweight handling. Also known as a speed square, rafter square, triangle square, angle finder, or carpenter's square. In stock with same-day pickup or fast shipping. Contact for availability and contractor pricing.
GutterAll - Damascus, Oregon
Professional Gutter and Roofing Supplies for Contractors
19759 SE Sunnyside Rd
Damascus, OR 97089
Mon-Fri: 7am-4pm
Sat: 9am-2pm PST
sales@gutterall.com
(503) 850-6784
