Gorilla Grip Professional Work Gloves — Medium, Large, Extra Large

Important Size and Use Notice

This listing is for one pair of Gorilla Grip Work Gloves in the selected size. Choose Medium, Large, or Extra Large based on hand width and comfort preference.

These gloves are built for grip, dexterity, and general hand protection during gutter installation, roofing, exterior repairs, maintenance, cleanup, shop work, and tool handling.

They are water-resistant for light moisture and wet-surface handling, not fully waterproof for prolonged soaking or heavy rain immersion.

Grip the Work, Not the Excuses

Gutter work is hard on hands. Wet aluminum gets slick. Hidden hangers bite. Screws are tiny. Downspout parts have sharp edges. Cheap gloves either slip, overheat, tear early, or make your fingers feel like they are wearing boxing gloves.

Gorilla Grip Work Gloves give installers the practical mix that matters: secure grip, breathable comfort, and enough fingertip control to handle small parts. The coated palm and fingers help control tools and materials, while the nylon/spandex shell keeps the glove flexible for repeated fastening, fitting, lifting, and cleanup work.

Key Benefits at a Glance

Gorilla Grip Work Gloves for Gutter Installation, Roofing, Construction, Cleanup, and Tool Handling

These gloves may also be searched as grip work gloves, contractor gloves, gutter gloves, roofing gloves, construction gloves, hand protection gloves, coated work gloves, breathable work gloves, dexterity gloves, palm-coated gloves, wet-grip gloves, maintenance gloves, shop gloves, lightweight work gloves, and general-purpose safety gloves.

For gutter installers, these gloves are useful when handling aluminum coil, finished gutter runs, downspout components, hidden hangers, screws, elbows, end caps, outlets, miters, sealant tubes, tools, ladders, debris, and wet materials.

They help crews keep their hands covered without giving up the fingertip control needed for the small work that eats time when gloves are too bulky.

The Real Upgrade Is Grip Without Losing Feel

A glove that grips but feels bulky slows the job down. A glove that feels good but slips on wet metal is not much better. Gutter crews need both control and feel because the work moves from heavy material handling to tiny screws in the same five minutes.

The grip-coated palm and fingers help hold tools and parts, while the flexible shell helps keep your hand moving naturally. That makes the glove useful for lifting, fastening, fitting, cutting, cleaning, and repeated field handling.

For installers, that means fewer dropped parts, better handling, less bare-hand work, and a glove that actually stays on during the job instead of becoming dashboard decoration.

Gutter and Exterior Work Applications

Why Grip Coating Matters on Gutter Work

Gutter materials are not always clean, dry, or easy to hold. Aluminum, painted surfaces, tools, screws, ladders, and downspout parts can get slick from rain, oil, dust, sealant, and jobsite debris.

A coated grip surface helps keep contact more controlled while still allowing the hand to flex. That matters when crews are moving from long material handling to detail fastening, especially on ladders or around rooflines.

Better grip means fewer drops, smoother handling, more confidence, and less time blaming gravity for bad glove choice.

Size Selection Guide

Measure around the widest part of the palm below the knuckles, excluding the thumb. When between sizes, choose the larger size for longer wear comfort.

Key Features

Quick Decision Summary

Choose Gorilla Grip Work Gloves when you need lightweight grip gloves for gutter installation, roofing, exterior repair, cleanup, maintenance, and shop work. They are a strong fit for crews that handle wet aluminum, tools, fasteners, hangers, downspout parts, and jobsite materials while still needing enough finger control for small detail work.

Benefits Buyers Notice Fast

• Improves control when handling wet aluminum, gutter stock, tools, and downspout parts
• Flexible shell helps preserve finger feel for small screws, hangers, outlets, and fittings
• Breathable nylon/spandex construction helps reduce heat buildup during long workdays
• Elastic wrist cuff helps block debris during overhead work, cleanup, and ladder-adjacent tasks
• Grip coating covers palm and finger zones for practical contact control
• Useful for gutter installation, roofing, construction, maintenance, landscaping, and shop work
• Available in Medium, Large, and Extra Large for common adult hand sizes
• Machine washable with cold water and air-dry care
• High-contrast black and yellow trim makes gloves easier to locate on active jobs
• A smart add-on with hangers, screws, downspout parts, safety gear, tools, and maintenance supplies
• Helps reduce bare-hand handling around rough materials and jobsite debris
• Keeps crews working instead of stopping every five minutes to rescue slippery parts from the ground

Product Specifications

Crew Ordering Guide

Who Uses Gorilla Grip Work Gloves?

Use and Care Guide

1. Choose the size that fits snugly without restricting finger movement.
2. Inspect the palm coating, fingertips, cuff, and seams before use.
3. Use for general material handling, tool grip, gutter parts, small fasteners, cleanup, and repair work.
4. Avoid use for live electrical work, heavy chemical exposure, high heat, prolonged soaking, or hazards beyond the glove rating.
5. Wash in cold water on a gentle cycle after dirty work or heavy debris exposure.
6. Do not use fabric softener because it can reduce grip coating performance.
7. Air dry only and avoid machine drying.
8. Replace the gloves when the coating wears through, the shell develops holes, the cuff loosens, or grip control drops noticeably.

Contractor Tip

Buy gloves like fasteners: enough for the job, plus extras for the truck. The glove that fits perfectly is always the one someone “borrowed real quick.”

Frequently Asked Questions

Safety Notice

Wear the correct hand protection for the hazard. These gloves are for general hand protection, grip, and dexterity, not specialized protection for every jobsite risk.

Do not use these gloves as electrical insulation, chemical protection, chainsaw protection, high-heat protection, or full waterproof protection.

Use caution around sharp metal, cut edges, puncture hazards, moving parts, and power tools.

Inspect gloves before use and replace them when the coating, shell, seams, fingertips, or cuff are worn or damaged.

Need Help Matching Gloves to Your Crew?

The right glove setup depends on crew size, weather, gutter material, job type, hand size mix, and whether the work is dry install, wet cleaning, roofing, maintenance, or shop prep.

Product Summary Box

Gorilla Grip Work Gloves are lightweight grip-coated contractor gloves for gutter installation, roofing, exterior repair, cleanup, maintenance, shop work, and general material handling. The nylon/spandex shell supports breathability and dexterity, the coated palm and fingers help control wet aluminum, tools, fasteners, hangers, and downspout parts, and the elastic wrist cuff helps keep debris out during overhead and ladder-adjacent work. Available in Medium, Large, and Extra Large.