IVY Classic 11in Double End Nail Puller Drop Forged Steel Dual Angle
IVY Classic 11in Double End Nail Puller Drop Forged Steel Dual Angle
Couldn't load pickup availability
IVY Classic 11-Inch Double-End Nail Puller
Drop-Forged Steel | 30° and 90° Offsets | Hardened and Tempered | Dual Beveled Nail Slots | High-Visibility Yellow
Remove Gutter Spikes, Fascia Nails, and Embedded Fasteners — Two Angles, One Tool
Gutter replacement and renovation projects require removing old fasteners — gutter spikes driven through aluminum and into fascia boards, roofing nails, siding nails, and embedded fasteners that have been in place for years. Standard single-angle nail pullers provide limited leverage options, forcing contractors to carry multiple tools or struggle with extraction angles. The IVY Classic 11-inch double-end nail puller solves this problem with two offset angles on a single tool — a 30-degree offset for tight spaces and prying in confined areas, and a 90-degree offset for maximum leverage on stubborn fasteners. Drop-forged from hardened and tempered steel, this professional-grade pry bar withstands the forces required to extract old gutter spikes and embedded nails without bending or breaking.
11" Length | Drop-Forged Steel | 30° + 90° Offsets | Hardened and Tempered | Dual Beveled Slots | High-Visibility Yellow
Key Benefits at a Glance
Extracts old aluminum gutter spikes from fascia boards — the primary fastener removal task during gutter replacement projects.
30-degree offset for tight spaces and prying, 90-degree offset for maximum leverage — two tools in one for complete extraction versatility.
Hardened and tempered construction withstands high extraction forces without bending — professional durability for demanding use.
Bright yellow powder-coat finish makes the tool easy to locate on job sites and rooftops — reduces lost tool time.
Professional-Grade Double-End Nail Puller for Gutter Replacement and Renovation
Removing old gutter systems requires extracting fasteners that have been in place for decades. Gutter spikes — the 7-inch aluminum or steel nails driven through gutter faces into fascia boards — are the most common fastener on older installations. These spikes corrode, the wood around them deteriorates, and extraction becomes difficult without proper tools. Standard nail pullers with single angles provide limited leverage options and often cannot reach spikes in tight locations. The IVY Classic double-end nail puller — also known as a cat's paw, nail claw, spike puller, and pry bar — provides two extraction angles on a single tool, eliminating the need to carry multiple prying tools.
For gutter installation contractors, this tool is essential equipment for replacement projects. The 30-degree offset end slides under nail heads in tight spaces where a 90-degree tool cannot fit — between gutter sections, under drip edge, and in corners. The 90-degree offset end provides maximum leverage for stubborn fasteners that require significant extraction force. The dual beveled nail slots grip nail heads securely during extraction, preventing slippage that damages surrounding materials. Drop-forged from hardened and tempered steel, the tool withstands repeated high-force extractions without bending, cracking, or deforming.
The 11-inch length provides optimal leverage for most gutter spike and fascia nail removal applications while remaining compact enough for rooftop work and ladder use. The high-visibility yellow powder-coat finish makes the tool easy to spot on job sites, reducing time spent searching for misplaced tools. Professional contractors keep this double-end nail puller on the truck for every gutter replacement project. GutterAll supplies professional contractors with IVY Classic nail pullers and related demolition tools. Available for shipping nationwide and local pickup at our Damascus, Oregon location.
| Product | Key Specifications |
|---|---|
| IVY Classic 11-Inch Double-End Nail Puller | 11" Length | Drop-Forged Steel | 30° + 90° Offsets | Hardened and Tempered | Dual Beveled Nail Slots | Yellow Finish |
Two extraction angles, one professional tool — removes gutter spikes and fascia nails.
Add to cart now. Ships fast. Contractor bulk orders: sales@gutterall.com
Why Gutter Installation Contractors Carry Double-End Nail Pullers
Every gutter replacement project begins with demolition — removing the old gutter system and all its fasteners before installing new components. Old gutter spikes are often corroded, bent, or embedded in deteriorated wood that makes extraction difficult. Fascia boards may have multiple nail holes from previous repairs, roofing nails may interfere with gutter placement, and old hangers may be secured with fasteners that require significant force to remove. Contractors who arrive at a job site without proper extraction tools face delays, damaged materials, and inefficient work. The IVY Classic double-end nail puller provides the extraction versatility needed for any fastener situation — tight spaces, stubborn spikes, embedded nails — with one tool that fits in a tool belt or bucket.
Gutter Installer Applications — When the Double-End Nail Puller Is Essential
The IVY Classic double-end nail puller addresses five primary extraction scenarios where gutter installation contractors encounter fasteners requiring removal:
| Application | The Challenge | Why It Helps |
|---|---|---|
| Gutter Spike Removal | Old aluminum gutter spikes are driven through gutter faces into fascia — often corroded and embedded in deteriorated wood | Dual angles provide optimal leverage for spike extraction — 30° for initial prying, 90° for final pull-through |
| Fascia Nail Extraction | Fascia boards have accumulated nails from previous repairs, old hangers, and drip edge installations | Beveled nail slots grip nail heads securely — extracts nails cleanly without damaging fascia for reuse |
| Tight Space Extraction | Fasteners in corners, under drip edge, and between gutter sections cannot be reached with standard 90° tools | 30-degree offset slides under nail heads in confined spaces — extracts fasteners that other tools cannot reach |
| Stubborn Fastener Removal | Some fasteners require significant force due to corrosion, wood swelling, or multiple penetrations | 90-degree offset provides maximum leverage — drop-forged steel withstands high extraction forces without bending |
| Old Hanger Removal | Old gutter hangers are secured with nails or screws that must be removed before new hanger installation | Dual angles and prying capability remove old hangers and their fasteners — prepares fascia for new installation |
Drop-Forged, Hardened and Tempered Steel — Professional Durability
Drop forging creates a stronger, more uniform steel structure compared to cast or stamped tools. The steel is heated and shaped under extreme pressure, aligning the grain structure for maximum strength. After forging, the steel is hardened and tempered — heat treated to achieve optimal hardness without brittleness. This process creates a tool that withstands high extraction forces without bending, cracking, or deforming. The IVY Classic nail puller maintains its shape and edge geometry through years of demanding contractor use.
30-Degree Offset — Tight Space Access and Initial Prying
The 30-degree offset end provides a shallow angle that slides under nail heads in confined spaces where a 90-degree tool cannot fit. This angle is ideal for initial prying — getting under a nail head to lift it before switching to the 90-degree end for final extraction. The shallow angle also works well for prying in tight locations such as between gutter sections, under drip edge, and in inside corners where clearance is limited.
90-Degree Offset — Maximum Leverage for Stubborn Fasteners
The 90-degree offset end provides a perpendicular pulling angle that maximizes leverage for extracting stubborn fasteners. This angle is ideal for gutter spikes, large nails, and fasteners that require significant force to remove. The perpendicular angle transfers pulling force directly to the nail head, reducing the effort required for extraction and allowing contractors to remove fasteners that resist other tools.
Dual Beveled Nail Slots — Secure Grip Without Slippage
Both ends of the nail puller feature beveled nail slots that grip nail heads securely during extraction. The beveled edges dig under nail heads and lock them in place, preventing the slippage that damages surrounding materials. This secure grip is essential for extracting nails from finished surfaces where slippage would leave marks or gouges. The precision-machined slots accommodate various nail head sizes for versatile extraction capability.
Nail Puller Comparison — Choosing the Right Tool for the Job
Double-End Nail Puller (This Product)
Two offset angles (30° and 90°) on one tool. Drop-forged steel with dual beveled slots. Handles tight spaces and stubborn fasteners with one tool.
Best for: Gutter spikes, fascia nails, varied extraction angles, professional demolition
Standard Cat's Paw
Single curved end for nail extraction. Requires hammer to drive under nail heads. Good for embedded nails but limited angle options.
Best for: Deeply embedded nails, hammer-driven extraction, rough demolition
Flat Pry Bar
Flat profile for prying and lifting. Limited nail pulling capability. Better for separating materials than extracting fasteners.
Best for: Prying, lifting, separating materials, light demolition
Drop-forged steel, dual angles, professional durability — the nail puller contractors rely on.
Add to cart now. Bulk contractor orders: sales@gutterall.com
Key Features and Gutter Installer Benefits
| Feature | Technical Detail | Gutter Installer Benefit |
|---|---|---|
| Drop-Forged Steel | Forged under pressure, hardened and tempered | Withstands high extraction forces without bending — handles stubborn gutter spikes and embedded nails |
| 30-Degree Offset End | Shallow angle for tight space access | Reaches fasteners in corners, under drip edge, and between gutter sections where 90° tools cannot fit |
| 90-Degree Offset End | Perpendicular angle for maximum leverage | Provides optimal pulling force for stubborn fasteners — extracts gutter spikes with minimal effort |
| Dual Beveled Nail Slots | Precision-machined slots on both ends | Grips nail heads securely without slippage — prevents damage to fascia and surrounding materials |
| 11-Inch Length | Optimal leverage-to-portability ratio | Sufficient leverage for most extractions while remaining compact for tool belt and ladder work |
| High-Visibility Yellow | Powder-coated bright yellow finish | Easy to locate on rooftops and job sites — reduces time spent searching for misplaced tools |
The IVY Classic 11-inch double-end nail puller — also known as a cat's paw, nail claw, spike puller, pry bar, and extraction bar — is the essential demolition tool for gutter installation contractors and renovation professionals. The drop-forged steel construction, dual 30° and 90° offset angles, hardened and tempered durability, and dual beveled nail slots make this tool the standard choice for removing gutter spikes, fascia nails, and embedded fasteners during replacement and renovation projects. GutterAll supplies professional contractors with IVY Classic nail pullers and related demolition tools. Contact sales@gutterall.com for bulk orders or contractor account pricing. Monday through Friday 7am to 4pm, Saturday 9am to 2pm PST.
Why Gutter Installation Contractors Carry IVY Classic Double-End Nail Pullers:
- Removes Gutter Spikes: Primary tool for extracting old aluminum gutter spikes from fascia boards during replacement projects
- Dual Angle Versatility: 30° and 90° offsets handle tight spaces and maximum leverage needs with one tool
- Drop-Forged Durability: Hardened and tempered steel withstands high extraction forces without bending or breaking
- Tight Space Access: 30-degree offset reaches fasteners under drip edge, in corners, and between gutter sections
- Maximum Leverage: 90-degree offset provides optimal pulling force for stubborn and corroded fasteners
- Secure Nail Grip: Dual beveled slots grip nail heads without slippage — prevents material damage during extraction
- Fascia Nail Extraction: Removes accumulated nails from fascia boards before new gutter installation
- Old Hanger Removal: Pries and extracts old gutter hangers and their fasteners efficiently
- High-Visibility Finish: Yellow powder-coat makes the tool easy to locate on rooftops and job sites
- Compact Portability: 11-inch length fits in tool belts and buckets for easy access during rooftop work
- Two Tools in One: Eliminates need to carry separate prying tools for different angle requirements
- Professional Durability: Withstands years of demanding contractor use without replacement
- Prevents Job Delays: Having proper extraction tools prevents delays when encountering stubborn fasteners
- Material Protection: Secure grip and controlled extraction prevent damage to reusable fascia and trim
- Essential Demolition Tool: Required equipment for every gutter replacement and renovation project
Product Specifications
| Product Type | Double-End Nail Puller |
| Brand | IVY Classic |
| Overall Length | 11 Inches |
| Material | Drop-Forged Steel, Hardened and Tempered |
| Offset Angles | 30 Degrees and 90 Degrees (Dual-Ended) |
| Nail Slots | Dual Beveled Slots on Both Ends |
| Finish | High-Visibility Yellow Powder Coat |
| Primary Applications | Gutter Spike Removal, Fascia Nail Extraction, Old Hanger Removal, Demolition, Renovation |
| Design Type | Double-Ended with Dual Angle Offsets |
| Leverage Configuration | 30° for Tight Spaces, 90° for Maximum Leverage |
| Grade | Professional Contractor Grade |
| Country of Origin | Imported |
| Expected Service Life | Years of professional use with proper care. Drop-forged steel construction maintains shape and edge geometry through repeated high-force extractions. Replace if bending, cracking, or significant wear to nail slots is observed. |
| Fulfillment Options | Ships nationwide | Local delivery | In-store pickup — Damascus, OR |
Who Specifies IVY Classic Double-End Nail Pullers
Gutter Installation Contractors (Primary)
- Gutter spike extraction during replacement projects
- Fascia nail removal before new gutter installation
- Old hanger and bracket removal
- Drip edge fastener extraction
- Tight space prying under gutter sections
- General demolition during renovation work
Why it matters: Gutter replacement projects begin with demolition. Every old gutter spike, fascia nail, and hanger fastener must be extracted before new components can be installed. The double-end nail puller provides the extraction versatility needed for any fastener situation, enabling efficient demolition without multiple trips to the truck for different prying tools.
General Contractors and Renovation Professionals (Secondary)
- Siding removal and nail extraction
- Roofing demolition and fastener removal
- Trim and molding removal
- Deck and fence demolition
- General carpentry nail pulling
- Renovation and remodeling projects
Why it matters: General contractors and renovation professionals encounter nail extraction needs throughout their projects. The dual-angle design handles siding nails, roofing fasteners, trim nails, and general demolition work with one tool. The drop-forged durability handles the high extraction forces required for stubborn fasteners.
Setup and Application Guide — Using the IVY Classic Double-End Nail Puller
- Select appropriate PPE: Nail extraction generates flying debris and sharp metal. Wear safety glasses, work gloves, and appropriate footwear. Ensure stable footing, especially when working on ladders or rooftops.
- Assess the fastener: Examine the nail or spike to determine the best extraction approach. Note the nail head condition, surrounding material, and available clearance to select the optimal offset angle for extraction.
- Select the appropriate end: Use the 30-degree offset for tight spaces, initial prying, and locations with limited clearance. Use the 90-degree offset for maximum leverage on stubborn fasteners and open areas.
- Position the nail slot: Slide the beveled nail slot under the nail head. Position the slot so the nail head seats fully in the slot for secure grip. Ensure the pry bar has solid contact with a prying surface.
- Apply initial prying force: Apply downward pressure on the handle to begin lifting the nail. For tight spaces, use the 30-degree end to start lifting the nail head before switching to the 90-degree end for final extraction.
- Maintain secure grip: Keep the nail head seated in the beveled slot throughout extraction. If the nail begins to slip, reposition the slot for better grip. Controlled extraction prevents material damage.
- Extract the fastener: Continue applying prying force until the fastener is fully extracted. For long fasteners like gutter spikes, reposition the tool as needed to maintain leverage as the fastener withdraws.
- Protect surrounding materials: Use a scrap wood block under the pry bar pivot point when extracting nails from finished surfaces. This distributes the prying force and prevents indentations in the material.
- Dispose of extracted fasteners: Collect extracted nails, spikes, and fasteners immediately after removal. Do not leave loose fasteners on rooftops, walkways, or work areas where they create puncture and trip hazards.
- Clean and store the tool: Wipe debris from the nail slots and prying surfaces after use. Store the nail puller in a dry location to prevent corrosion. Inspect periodically for wear to nail slots and bending.
Professional double-end nail puller — extracts gutter spikes and fascia nails efficiently.
Add to cart now. Ships fast. Bulk contractor orders available.
Email sales@gutterall.com | Mon-Fri 7am-4pm, Sat 9am-2pm PST
Frequently Asked Questions
What is the difference between the 30-degree and 90-degree ends? +
Can this tool remove gutter spikes? +
Why is drop-forged steel better than other construction methods? +
What is the return policy? +
How long does shipping take? +
Is an 11-inch nail puller long enough for gutter work? +
Safety Notice — Personal Protective Equipment Required
PPE REQUIRED FOR ALL EXTRACTION OPERATIONS. Nail and spike extraction generates flying debris, sharp metal fragments, and creates puncture hazards. Always wear ANSI-rated safety glasses and work gloves. Ensure stable footing when working on ladders, scaffolds, or rooftops. Collect and dispose of extracted fasteners immediately — do not leave loose nails or spikes on work surfaces. Inspect tool before each use and do not use if bent, cracked, or showing significant wear to nail slots. For product questions, contact sales@gutterall.com.
Order IVY Classic 11-Inch Double-End Nail Puller — Professional Extraction Tool
Professional-grade drop-forged steel nail puller with dual 30° and 90° offset angles. Hardened and tempered for demanding use. Dual beveled nail slots for secure grip. High-visibility yellow finish. The essential demolition tool for gutter replacement and renovation projects. Add to cart now.
Add to Cart — Ships Fast
Nationwide shipping | Local delivery | In-store pickup available
Bulk contractor orders: sales@gutterall.com
Mon-Fri 7am-4pm | Sat 9am-2pm PST | (503) 850-6784
IVY Classic 11-Inch Double-End Nail Puller — At a Glance
Professional Double-End Nail Puller. 11-Inch Length. Drop-Forged, Hardened and Tempered Steel. Dual 30° and 90° Offset Angles. Dual Beveled Nail Slots. High-Visibility Yellow Finish. Professional Contractor Grade. Nationwide Shipping Available.
GutterAll — Professional Gutter Installation Supplies
Damascus, OR 97089
Sat: 9am-2pm PST
