IVY Classic 6" Mini Hacksaw Blades 32 TPI High Carbon Steel | 5-Pack
IVY Classic 6" Mini Hacksaw Blades 32 TPI High Carbon Steel | 5-Pack
Couldn't load pickup availability
IVY Classic 6" Mini Hi-Lo Hacksaw Blades — 32 TPI High Carbon Steel
High Carbon Steel | 32 Teeth Per Inch | 6" Mini Length | Hi-Lo Tooth Set | Made in USA | Model 11092 | 5-Pack
The Mini Hacksaw Blade That Cuts Gutter Hardware Clean — Not Ragged
Gutter installation requires cutting small metal components in tight spaces — hanger straps, downspout brackets, sheet metal gutter sections, and aluminum trim pieces. Standard full-size hacksaw frames cannot reach into corners or fit behind fascia boards where these cuts need to happen. Mini hacksaw frames solve the access problem, but the blades that come with most of them are stamped from cheap steel and dull after a handful of cuts. When a dull mini blade tears through a hanger strap instead of cutting it, the result is a ragged edge that does not sit flush and a bracket that looks unprofessional at handoff. The IVY Classic 11092 is a 6-inch mini hacksaw blade made from high carbon steel with 32 teeth per inch and an alternating Hi-Lo tooth set pattern that produces smooth, burr-free cuts through aluminum, steel, copper, and even plastic and wood trim components.
High Carbon Steel | 32 TPI Fine Cut | Hi-Lo Tooth Set | 6" Mini Length | Made in USA | Ships Nationwide from Damascus, OR
Key Benefits at a Glance
High tooth count produces smooth, burr-free cuts on thin-wall aluminum gutter sections, downspout material, and sheet metal hardware — no filing or deburring required after the cut.
Harder alloy holds a sharp cutting edge through more cuts than standard mild-steel mini blades — fewer blade changes across a full day of gutter hardware cutting.
Alternating tooth height pattern clears chips efficiently during the cut stroke, reducing blade binding and allowing faster cutting with less pressure on thin-wall material.
Fits mini hacksaw frames including the IVY Classic 11091 — access tight spaces behind fascia boards, inside corners, and confined areas where full-size hacksaws cannot reach.
Built for the Precision Cuts Gutter Hardware Demands
Gutter installers and cleaning contractors use mini hacksaws — also called junior hacksaws, close-quarter hacksaws, and compact hacksaws — for cuts that full-size hacksaw frames cannot access. Trimming a hanger strap that is already mounted to the fascia. Shortening a downspout section in place. Notching a sheet metal end cap to clear an obstruction. Cutting a bracket bolt that is too close to the gutter back for a reciprocating saw blade. These are tight-clearance metal cuts where a 12-inch hacksaw frame will not fit and where the cut quality matters because the finished edge is visible or must seat flush against another component.
The IVY Classic 11092 is a 6-inch replacement blade for mini hacksaw frames, manufactured from high carbon steel with 32 teeth per inch and a Hi-Lo alternating tooth set. The high carbon steel composition allows the blade to be hardened during manufacturing to a higher Rockwell hardness than standard mild-steel blades, which means the cutting teeth maintain their edge geometry through significantly more cuts before degrading. The 32 TPI tooth count is a fine-pitch specification designed for cutting thin-wall material — aluminum gutter sections, copper flashing, steel hanger straps, and sheet metal brackets. The Hi-Lo tooth set means alternating teeth are set to different heights, which improves chip clearance during the cut stroke and reduces blade binding on the return stroke.
GutterAll in Damascus, Oregon supplies gutter installation contractors and cleaning crews with professional-grade cutting tools including IVY Classic mini hacksaw blades. The 11092 is sold in a 5-pack retail card — the right quantity for keeping a fresh blade on every mini hacksaw frame in the truck while maintaining replacement inventory without over-stocking. All orders ship nationwide from Damascus. Local delivery and in-store pickup are available for contractors in the greater Portland metro area.
| Product | Key Specifications |
|---|---|
| IVY Classic 11092 6" Mini Hi-Lo Hacksaw Blades |
High Carbon Steel | 32 TPI | 6" Length | Hi-Lo Tooth Set | Made in USA | 5-Pack | Fits IVY Classic 11091 and Compatible Mini Hacksaw Frames | Cuts Metal, Wood, Plastic |
Ragged cuts on visible gutter hardware look unprofessional. Cut clean from the first stroke.
Add to cart now — ships fast from Damascus, OR. Crew quantity orders: sales@gutterall.com
Why Blade Quality Matters on Mini Hacksaw Cuts
Mini hacksaw cuts are almost always on components that will be visible or that must fit precisely against another part. When the blade dulls partway through a hanger strap, the cut tears instead of slicing — leaving a ragged edge that catches on the gutter section during installation or that looks rough at the final walkthrough. A dull blade also requires more pressure, which fatigues the wrist faster and makes it harder to control the cut line on off-angle cuts in tight spaces. The IVY Classic 11092 high carbon steel blade maintains its cutting edge through more strokes than standard mild-steel mini blades under equivalent cutting conditions. The result is cleaner cuts across a full day of gutter hardware work, fewer blade changes that interrupt workflow, and finished edges that seat flush and look professional without post-cut filing or deburring.
Gutter Installer and Cleaner Applications
IVY Classic 6" mini hacksaw blades address five high-frequency cutting tasks on gutter installation and cleaning jobs where cut quality directly affects hardware fit, appearance, and callback risk:
| Gutter Application | The Cutting Challenge | Why It Helps |
|---|---|---|
| Hanger Strap Trimming | Shortening steel or aluminum hanger straps already mounted to the fascia — full-size hacksaws cannot reach behind the gutter section to access the cut location | 6" mini blade fits into the confined space between fascia and gutter back; 32 TPI fine pitch cuts thin strap material without tearing or leaving a ragged visible edge |
| Downspout Section Shortening | Trimming a downspout section to length while installed on the wall — requires cutting aluminum tube material in place without scratching the wall surface | High carbon steel holds edge through the full circumference cut; Hi-Lo tooth set clears chips on thin-wall aluminum tube without binding or blade walking |
| End Cap and Outlet Notching | Notching sheet metal end caps or outlet pieces to clear obstructions — requires precise, short cuts in corners that a reciprocating saw blade cannot access | 32 TPI produces burr-free edges on notch cuts; fine pitch prevents the blade from catching and skipping across sheet metal surface during short controlled strokes |
| Bracket Bolt and Fastener Cutting | Cutting bracket bolts, threaded rod, or fasteners that are too close to the gutter section for a reciprocating saw or angle grinder to access safely | Mini hacksaw frame reaches into confined fastener locations; high carbon steel blade cuts hardened bolt steel without excessive dulling or tooth stripping |
| Copper Flashing and Trim Cutting | Trimming copper flashing, drip edge, or decorative trim pieces to length — copper requires a clean cut edge that will not show saw marks after patina develops | 32 TPI fine pitch produces smooth cuts on soft copper without leaving deep tooth marks; Hi-Lo set clears copper chips that would otherwise clog the kerf and cause blade wander |
32 TPI — Why Tooth Count Determines Cut Quality on Thin-Wall Material
Teeth per inch (TPI) is the primary factor determining whether a hacksaw blade produces a smooth or ragged cut on a given material thickness. The rule is that at least three teeth should be in contact with the material at all times during the cut stroke. For thin-wall gutter material — aluminum sections, downspout tubing, steel hanger straps — a 32 TPI blade keeps more teeth engaged than a coarse-pitch blade would, which means the cut progresses smoothly without individual teeth catching and tearing. The fine pitch also produces narrower tooth marks on the cut face, resulting in a smoother finished edge that seats flush against mating components and looks professional on visible hardware without requiring post-cut deburring.
Hi-Lo Alternating Tooth Set — Chip Clearance for Faster, Cleaner Cuts
The Hi-Lo designation refers to the alternating height pattern of the blade teeth. In a Hi-Lo set, teeth alternate between two different heights along the blade length. This pattern improves chip clearance during the cut stroke — the taller teeth score the material first and create space for chips to clear, while the shorter teeth widen the kerf and prevent chip packing. On thin-wall aluminum and soft metals, chip packing is a common cause of blade binding and cut-line wander. The Hi-Lo pattern reduces binding by keeping the kerf clear, which allows the blade to cut faster with less forward pressure and produces a straighter cut line with less operator effort.
High Carbon Steel — Edge Retention Through More Cuts
High carbon steel contains a higher percentage of carbon than mild steel, which allows it to be heat-treated to a higher hardness. A harder blade holds its tooth geometry — the sharpness of the cutting edge and the precision of the tooth set — through more cutting strokes before wear degrades cutting performance. Standard mild-steel mini hacksaw blades dull quickly on steel hanger straps and hardened fasteners, requiring frequent blade changes and producing progressively rougher cuts as the teeth wear. The IVY Classic 11092 high carbon steel blade maintains consistent cutting performance across more cuts, reducing blade consumption and delivering the same cut quality on the last stroke as the first.
Made in USA — Consistent Quality Blade to Blade
Domestic manufacturing under consistent quality controls produces blade-to-blade uniformity in steel composition, heat treatment hardness, tooth geometry, and set pattern accuracy. For contractors who go through multiple blades per week, this consistency matters — every blade in every pack cuts and wears the same way, which means predictable performance and no surprises from individual blades that are softer, less accurately set, or differently hardened than others in the same pack. IVY Classic hacksaw blades have been a standard in the metalworking and building trades for decades; model 11092 is the 6-inch mini blade variant stocked by GutterAll specifically for gutter installation and cleaning crews.
Choosing the Right TPI — Fine vs. Medium vs. Coarse Pitch
32 TPI — Fine Pitch (This Product)
Thin-wall aluminum gutter sections, downspout tubing, sheet metal hanger straps, copper flashing, thin steel brackets. Produces smoothest cut with minimal burr. Ideal when three or more teeth must engage thin material for a clean cut.
Best for: Gutter hardware, thin sheet metal, copper, aluminum tube — any material under 1/8" wall thickness
24 TPI — Medium Pitch
General-purpose cutting on medium-thickness material. Balances cut smoothness with cutting speed. Suitable for angle iron, conduit, and medium-wall tubing where fine pitch would cut too slowly.
Best for: General metal, conduit, angle iron — material between 1/8" and 1/4" thickness
18 TPI — Coarse Pitch
Fast cutting on thick material where cut smoothness is less critical. Larger tooth gullets clear chips efficiently on heavy stock. Leaves rougher edge that may require filing.
Best for: Thick-wall pipe, solid bar stock, structural steel — material over 1/4" thickness
The 5-pack keeps fresh blades on every mini hacksaw in the truck — with inventory to spare.
Add to cart now. Ships from Damascus, OR. Bulk orders: sales@gutterall.com
Key Features and Gutter Installer Benefits
| Feature | Technical Detail | Gutter Installer Benefit |
|---|---|---|
| Tooth Count | 32 Teeth Per Inch (TPI) | Fine pitch keeps multiple teeth engaged on thin-wall gutter material — smooth, burr-free cuts on aluminum sections, downspout tubing, and sheet metal hardware |
| Steel Grade | High Carbon Steel | Harder alloy maintains tooth sharpness through more cuts — longer blade life, fewer mid-job blade changes, consistent cut quality from first stroke to last |
| Tooth Pattern | Hi-Lo Alternating Set | Alternating tooth height improves chip clearance — reduces blade binding on thin-wall aluminum and soft metals, faster cutting with less forward pressure |
| Blade Length | 6 Inches (Mini) | Fits mini hacksaw frames — access tight spaces behind fascia boards, inside corners, and confined areas where 12" full-size hacksaws cannot reach |
| Origin | Made in USA | Consistent blade-to-blade quality — hardness, tooth set, and geometry are uniform across every blade in every pack for predictable cutting performance |
| Material Compatibility | Metal, Wood, Plastic | Single blade type handles aluminum, steel, copper, PVC trim, and wood blocking — one blade specification covers the full range of gutter installation materials |
IVY Classic 6" Mini Hi-Lo Hacksaw Blades — also known in the trades as junior hacksaw blades, close-quarter hacksaw blades, compact hacksaw blades, and mini saw blades — are the high carbon steel, USA-made cutting supply that gutter installation contractors and cleaning crews rely on for clean, professional cuts on visible gutter hardware in tight spaces. The 32 TPI fine pitch, Hi-Lo alternating tooth set, and domestic manufacturing quality standard make these the professional-grade choice over generic hardware-store mini blades for crews where cut quality affects hardware fit and installation appearance. GutterAll in Damascus, Oregon stocks IVY Classic model 11092 in 5-pack retail cards and ships them nationwide. Contact sales@gutterall.com for crew quantity pricing or to add mini hacksaw blades to any gutter installation supply order. Monday through Friday 7am to 4pm, Saturday 9am to 2pm PST.
Why Gutter Crews Specify IVY Classic Mini Hacksaw Blades:
- 32 TPI Fine Pitch: High tooth count produces smooth, burr-free cuts on thin-wall aluminum gutter sections and sheet metal hardware without tearing
- High Carbon Steel: Harder alloy maintains cutting edge sharpness through more strokes than standard mild-steel mini blades
- Hi-Lo Alternating Tooth Set: Alternating tooth height improves chip clearance, reduces blade binding, and allows faster cuts with less pressure
- 6" Mini Length: Fits mini hacksaw frames for access to tight spaces behind fascia, inside corners, and confined cutting locations
- Made in USA: Consistent blade-to-blade quality — no lot-to-lot variation in hardness, tooth set, or cutting performance
- Hanger Strap Trimming: Fine pitch cuts thin steel and aluminum straps without the tearing that leaves ragged visible edges
- Downspout Section Cutting: Hi-Lo set clears chips on thin-wall aluminum tube — clean circumference cuts without blade binding
- End Cap and Outlet Notching: 32 TPI prevents blade from catching and skipping across sheet metal during short, controlled notch cuts
- Bracket Bolt Cutting: High carbon steel cuts hardened fastener steel without excessive dulling or tooth stripping
- Copper Flashing Trimming: Fine pitch produces smooth cuts on soft copper without deep tooth marks that show after patina develops
- Multi-Material Compatibility: Cuts metal, wood, and plastic — one blade specification for aluminum, steel, copper, PVC, and wood blocking
- Frame Compatibility: Fits IVY Classic 11091 mini hacksaw and most other mini hacksaw frames with standard 6" blade mounts
- 5-Pack Quantity: Right pack size for keeping fresh blades on every truck while maintaining inventory without over-stocking
- Professional Cut Quality: Clean edges seat flush against mating components and look professional at final walkthrough
- Reduced Blade Changes: Longer edge retention means fewer stops to swap blades across a full day of gutter hardware cutting
Product Specifications
| Product Type | Mini Hacksaw Blades — 6" Length |
| Brand | IVY Classic |
| Model Number | 11092 |
| Steel Grade | High Carbon Steel |
| Teeth Per Inch (TPI) | 32 TPI (Fine Pitch) |
| Tooth Pattern | Hi-Lo Alternating Set |
| Blade Length | 6 Inches |
| Country of Manufacture | Made in USA |
| Pack Size | 5 Blades per Retail Card |
| Frame Compatibility | IVY Classic 11091 Mini Hacksaw and most standard 6" mini hacksaw frames |
| Material Compatibility | Metal (aluminum, steel, copper), Wood, Plastic (PVC, ABS) |
| Primary Trade Applications | Gutter installation, gutter cleaning, HVAC, plumbing, electrical, general construction |
| Construction Grade | Professional — Commercial and Trade Use |
| Expected Service Life | Blades are consumable cutting supplies replaced as teeth dull. High carbon steel provides longer edge retention per blade than standard mild-steel mini blades under equivalent cutting conditions on gutter hardware materials. |
| Fulfillment Options | Ships nationwide | Local delivery | In-store pickup — Damascus, OR |
Who Specifies IVY Classic Mini Hacksaw Blades
Gutter Installers and Cleaning Crews (Primary)
- Trimming hanger straps mounted behind installed gutter sections
- Shortening downspout sections in place on the wall
- Notching sheet metal end caps and outlet pieces
- Cutting bracket bolts and fasteners in confined spaces
- Trimming copper flashing and drip edge to length
- General tight-space metal cutting across gutter installation tasks
Why it matters: Gutter hardware cuts are almost always in tight spaces and on components that are visible at handoff. A blade that produces clean, burr-free edges without tearing eliminates the need for post-cut filing and delivers professional-looking results that reduce callback risk.
HVAC, Plumbing, and General Contractors (Secondary)
- Cutting copper tubing in wall cavities and ceiling spaces
- Trimming conduit and thin-wall metal in confined electrical boxes
- Notching sheet metal ductwork for penetrations
- Cutting PVC and ABS pipe in tight plumbing spaces
- Shortening threaded rod and all-thread in installed locations
- General close-quarter metal and plastic cutting
Why it matters: Any trade that cuts thin-wall material in confined spaces benefits from a fine-pitch, high-carbon steel mini blade that produces smooth cuts without binding — the same performance factors that make this blade the professional choice for gutter hardware work.
Setup and Application Guide — Using IVY Classic Mini Hacksaw Blades
- Install the blade with correct tooth direction: Mini hacksaw blades cut on the push stroke. Install the blade with teeth pointing away from the handle so cutting happens when pushing the saw forward. Reverse-mounted blades cut on the pull stroke, reducing control and accelerating tooth wear.
- Tension the blade correctly: Turn the tensioning mechanism until the blade is taut with no lateral flex. A slack blade wanders off the cut line and produces a crooked kerf. Over-tensioned blades are prone to snapping under cutting pressure.
- Mark the cut line before beginning: Use a pencil, marker, or scratch awl to mark the exact cut location. On round material like downspout tubing, mark completely around the circumference so the blade tracks the same line throughout the cut rotation.
- Start the cut with light pressure: Begin with short, light strokes to establish a kerf groove before applying full cutting pressure. On thin-wall aluminum and sheet metal, the blade will walk across the surface if forced into the material before a guiding groove is established.
- Use full blade strokes: Once the kerf is established, use the full length of the blade with steady, even pressure on the push stroke. Short, choppy strokes concentrate wear on the center section of the blade and dull that section prematurely while leaving the ends unused.
- Let the blade do the work: The 32 TPI fine pitch cuts efficiently with moderate forward pressure. Excessive pressure does not speed the cut — it causes the blade to bind, increases tooth wear, and fatigues the wrist. Smooth, steady strokes produce faster results than forced, heavy strokes.
- Clear chips periodically: The Hi-Lo tooth set clears chips automatically on most cuts, but on deep cuts or when cutting soft aluminum that produces long curly chips, back the blade out periodically to clear accumulated material from the kerf.
- Support the material near the cut: On thin-wall material, vibration from an unsupported section causes the blade to chatter and produce a rough cut edge. Hold or clamp the workpiece close to the cut line so the material does not flex under blade pressure.
- Change blades at first sign of dullness: A blade that drags, wanders off the cut line, or produces a rougher edge than usual is dull. Continuing to cut with a dull blade produces poor results and risks blade snap from the increased pressure required to force the cut.
- Dispose of used blades safely: Mini hacksaw blades are thin, sharp, and prone to snapping into fragments under stress. Place used blades in a rigid container — not loose in a trash bag where they can cut through the bag and injure the next person handling it.
32 TPI high carbon steel blades that cut gutter hardware clean — not ragged.
Add to cart. Ships fast from Damascus, OR. Bulk crew packs available.
Email sales@gutterall.com | Mon-Fri 7am-4pm, Sat 9am-2pm PST
Frequently Asked Questions
Q: Will these 32 TPI blades cut aluminum gutter sections and downspout tubing without tearing the edges?
Yes. The 32 TPI fine pitch keeps multiple teeth engaged on thin-wall aluminum at all times during the cut stroke, which prevents individual teeth from catching and tearing the material. The result is a smooth, burr-free cut edge that seats flush against mating components and looks clean at final walkthrough without requiring post-cut filing or deburring. This fine pitch is specifically designed for thin-wall material like gutter sections, downspout tubing, and sheet metal hardware where coarser blades would produce ragged, torn edges.
Q: What does Hi-Lo tooth set mean, and how does it affect cutting performance?
Hi-Lo refers to an alternating tooth height pattern where adjacent teeth are ground to different heights along the blade length. This pattern improves chip clearance during the cut stroke — the taller teeth score the material first while the shorter teeth widen the kerf and create space for chips to exit. On thin-wall aluminum and soft metals that produce long, curly chips, the Hi-Lo set prevents chip packing in the kerf, which reduces blade binding and allows the blade to cut faster with less forward pressure. The result is a smoother, straighter cut with less operator effort.
Q: What mini hacksaw frames are these blades compatible with?
The IVY Classic 11092 is a standard 6-inch mini hacksaw blade that fits the IVY Classic 11091 mini hacksaw frame and most other mini hacksaw frames designed for 6-inch blades. The mounting pin holes are positioned to the industry standard for 6-inch mini blades. If there is any uncertainty about compatibility with a specific frame, contact sales@gutterall.com with the frame make and model for confirmation before ordering.
Q: What is the return policy?
IVY Classic mini hacksaw blades may be returned within 30 days of purchase in original, unopened packaging for a full refund or exchange. Blade packs that have been opened or blades that have been used cannot be returned for safety reasons. Contact sales@gutterall.com to initiate a return and receive return shipping instructions before sending anything back. Refunds are processed within 5 to 7 business days of GutterAll receiving the returned item in qualifying condition. Return shipping costs are the responsibility of the buyer unless the return is the result of a product defect or a shipping error made by GutterAll.
Q: How long does shipping take, and is local pickup available?
Orders are typically processed and shipped within 1 to 2 business days from GutterAll's Damascus, Oregon facility. Standard ground shipping transit time is 3 to 7 business days depending on destination. Expedited shipping options are available at checkout for urgent crew restocking needs. In-store pickup at 19759 SE Sunnyside Rd, Damascus, OR 97089 is available Monday through Friday 7am to 4pm and Saturday 9am to 2pm PST. Local delivery within the greater Damascus and Portland metro area is also available. Contact sales@gutterall.com for bulk crew order quantities and lead times.
Q: How many cuts can I expect from one blade before it needs to be replaced?
Blade life depends on the material being cut, cutting technique, and blade tension. On thin-wall aluminum gutter material and sheet metal hanger straps, the IVY Classic high carbon steel blade will maintain its cutting edge through significantly more cuts than standard mild-steel mini blades under equivalent conditions. Replace the blade when it begins to drag, wander off the cut line, or produce a rougher edge than usual — these are signs that the teeth have dulled past their effective cutting point. Forcing cuts with a dull blade produces poor results, risks blade snap, and costs more time than changing to a fresh blade.
Safety Notice — Professional Use Required
WARNING: SHARP CUTTING TOOL — PROFESSIONAL USE ONLY. Mini hacksaw blades are thin, sharp, and can snap under excessive pressure. Always wear safety glasses when cutting — blade fragments can become projectiles if the blade breaks. Wear cut-resistant gloves when handling loose blades during installation and disposal. Ensure proper blade tension before cutting — slack blades wander and bind, over-tensioned blades are prone to snapping. Cut away from the body. Do not force cuts — excessive pressure causes blade breakage. Dispose of used and broken blades in a puncture-resistant container, never loose in a waste bag. Store blade packs out of reach of children at all times. Follow all applicable OSHA hand tool safety regulations. For product safety questions, contact sales@gutterall.com.
Order IVY Classic 6" Mini Hacksaw Blades — 32 TPI High Carbon Steel
Fine pitch that cuts thin-wall gutter material clean. High carbon steel that outlasts standard mild-steel mini blades. Hi-Lo tooth set that clears chips and reduces binding. Made in USA quality that delivers consistent performance blade to blade. 5-pack quantity that keeps every mini hacksaw in the truck stocked with fresh blades. Add to cart now.
Add to Cart — Ships Fast from Damascus, OR
In-store pickup | Local delivery | Nationwide shipping available
Crew quantity and bulk pack orders: sales@gutterall.com
Mon-Fri 7am-4pm | Sat 9am-2pm PST | (503) 850-6784
IVY Classic 6" Mini Hi-Lo Hacksaw Blades — At a Glance
IVY Classic Model 11092. 6" Mini Hacksaw Blades. High Carbon Steel. 32 Teeth Per Inch. Hi-Lo Alternating Tooth Set. Made in USA. 5-Pack Retail Card. Fits IVY Classic 11091 and Compatible Mini Hacksaw Frames. Cuts Metal, Wood, Plastic. Gutter Hardware, Downspout Sections, Hanger Straps, Sheet Metal, Copper Flashing, and Tight-Space Cutting Applications. Ships Nationwide from GutterAll, Damascus, OR.
GutterAll — Professional Gutter Installation Supplies
Damascus, OR 97089
Sat: 9am-2pm PST
