LeafBlaster PRO 30-Mesh Gutter Guard 5 in & 6 in

A Cleaner Gutter Starts Before Debris Gets Inside

Open gutters collect the exact junk that makes service calls ugly: wet leaves, pine needles, roof grit, seed pods, twigs, and sludge around the downspout outlet. Once debris settles inside the trough, water slows down, overflow risk rises, and cleaning gets messier.

LeafBlaster PRO 30-Mesh Gutter Guard helps reduce debris entry while allowing rainwater to move through stainless steel micro-mesh into the gutter channel. For contractors, it creates a higher-value gutter upgrade that is easy to explain: less debris inside, cleaner roofline protection, and better maintenance expectations when installed and maintained correctly.

Key Benefits at a Glance

30-Mesh Stainless Steel Gutter Protection for 5 in and 6 in Gutter Systems

LeafBlaster PRO is a stainless steel micro-mesh gutter guard designed for professional gutter protection projects. The 30-mesh screen helps block leaves, pine needles, roof grit, seed pods, and roofline debris before they settle inside the gutter and collect around downspout openings.

For gutter installers, this is the upgrade to present when customers are tired of repeat cleanouts, downspout clogging, wet debris buildup, and gutters that look fine from the ground but are packed with roof grit under the edge. The fine mesh helps keep debris on top of the guard where routine surface maintenance is easier than digging out a full gutter trough.

Available for 5 in and 6 in gutter applications, with 4 ft sections and box quantities that cover 100 linear ft before trimming, corners, waste, or site-specific adjustments. Model references include LBP100 and LBP100C from the supplied product data.

GutterAll in Damascus, OR supports gutter installers, gutter cleaning crews, property managers, maintenance teams, builders, and homeowners with gutter protection, gutter parts, pickup, local delivery, and nationwide shipping.

The Real Problem: Small Debris Creates Big Gutter Headaches

Large leaves are only part of the problem. Pine needles, roof grit, seed pods, and small debris can slip into open gutters, stack up around outlets, and form the kind of wet sludge that makes water back up at the worst time.

A fine stainless steel micro-mesh guard helps limit what gets into the gutter channel in the first place. It does not make any gutter system maintenance-free, and the top surface should still be checked and cleared when debris builds up. But when the right guard is matched to the right roofline, the gutter is better protected from the debris that causes repeat cleanouts.

Best use cases include tree-heavy homes, pine needle areas, roof-grit runoff, gutter replacement upgrades, service-route add-ons, property maintenance, rental properties, downspout clog reduction projects, and customers who want a premium guard option instead of a basic screen.

Size, Model, and Coverage Guide

How the Micro-Mesh Helps

The 30-mesh stainless steel screen creates a fine barrier across the gutter opening. Rainwater can pass through the mesh, while leaves, pine needles, roof grit, seed pods, and similar debris are held above the gutter channel instead of dropping directly into the trough.

LeafBlaster PRO is also associated with Z-Bend Technology, which raises the mesh profile to help keep debris lifted from the surface and support water entry. That design helps contractors explain the value clearly: finer filtration, cleaner gutter interiors, and a premium roofline protection option for problem debris.

For best results, install over clean gutters, confirm correct sizing, maintain proper pitch and water path, clear the surface when debris accumulates, and keep downspout outlets open before the guard goes on.

Choose the Right Gutter Guard Setup

Best Uses for Gutter Installers and Property Maintenance

Key Features

Quick Decision Summary

Choose LeafBlaster PRO 30-Mesh Gutter Guard when the job calls for premium micro-mesh protection against leaves, pine needles, roof grit, seed pods, and smaller roofline debris. It is a strong fit for gutter installers, cleaning crews, maintenance accounts, property managers, and homeowners who want a finer debris barrier than basic open gutter screens.

Benefits Installers and Property Owners Notice Fast

• Helps reduce leaves, pine needles, roof grit, seed pods, and smaller debris entering the gutter
• 30-mesh stainless steel micro-mesh supports fine debris filtration
• Allows rainwater to pass through the mesh into the gutter channel
• Z-Bend Technology helps lift debris off the guard surface
• Useful for 5 in and 6 in gutter protection projects
• 4 ft sections are easier to stage, count, carry, trim, and install
• 25-section box option covers 100 linear ft before trimming and waste
• Strong add-on for gutter replacement and cleaning jobs
• Helps reduce debris buildup around downspout outlets
• Better option than basic screens when smaller debris is the main concern
• Useful for tree-heavy homes, pine needle areas, rental properties, and maintenance accounts
• Supports cleaner gutter interiors when installed and maintained correctly
• Works as micro-mesh gutter guard, leaf guard, gutter cover, gutter screen, and debris protection
• Practical for contractors, property managers, homeowners, and experienced exterior crews
• Available with pickup, local delivery, and nationwide shipping through checkout

Product Specifications

Who Uses LeafBlaster PRO 30-Mesh Gutter Guard?

How to Install LeafBlaster PRO Gutter Guard Sections

1. Confirm the gutter size and select the correct 5 in or 6 in guard option.
2. Clean leaves, sludge, roof grit, and debris from the gutter before installation.
3. Clear or flush the downspout so water has an open path out of the gutter system.
4. Measure the gutter run and calculate the number of 4 ft sections needed.
5. Dry-fit the first section to confirm placement, roofline clearance, and gutter fit.
6. Install the section according to the product instructions and project conditions.
7. Continue section by section, keeping alignment consistent along the run.
8. Trim end sections carefully where the run is shorter than a full 4 ft piece.
9. Check corners, miters, outlets, and downspout areas for proper fit and open water flow.
10. Inspect after rainfall and clear the top surface as needed to maintain water entry through the mesh.

Contractor Tip

Sell this as fine-debris protection, not magic. LeafBlaster PRO helps keep leaves, pine needles, roof grit, and debris out of the gutter channel, but the top surface still needs inspection. That honest explanation protects the sale, the installer, and the customer relationship. Nobody wins when a gutter guard is sold like it comes with a force field.

Frequently Asked Questions

Installation and Safety Notice

Gutter guard installation may require ladder access at roofline height. Use proper ladder safety, stable footing, and fall protection when required.

Clean the gutter and downspout before installing guards. Covering a clogged gutter can trap the problem instead of correcting it.

Wear gloves and eye protection when handling, cutting, or trimming gutter guard sections. Cut edges and metal mesh may be sharp.

Confirm fit with the specific gutter profile, roof edge, pitch, and installation conditions before installing across the full run.

Need Help Matching Gutter Guard to the Run?

The right choice depends on gutter size, roof edge, debris type, pitch, linear footage, downspout layout, and whether the project needs individual sections or 100 linear ft box coverage. Use website chat to match the guard setup with the job.

Product Summary Box

LeafBlaster PRO 30-Mesh Gutter Guard is a stainless steel micro-mesh gutter protection option for 5 in and 6 in gutter applications. Each 4 ft section helps reduce leaves, pine needles, roof grit, seed pods, and smaller debris entering the gutter channel while still allowing rainwater through the mesh. Use individual sections for smaller runs or 25-section boxes for 100 linear ft coverage before trimming and jobsite adjustments.