Supersider 1 in White Step Flashing - Sold by Foot
Supersider 1 in White Step Flashing - Sold by Foot
Couldn't load pickup availability
Supersider 1 in Profile | White 26ga Steel | Sold by Foot | 8 ft Max Ship Length
Supersider 1 in White Step Flashing - Sold by Foot
Clean up roof-wall, siding, trim, fascia, and gutter-adjacent transitions with a formed white steel flashing profile that helps crews control water and finish the edge without improvising every bend on site.
Clear Pricing and Sizing
This flashing is priced and sold by the foot. Enter the total number of linear feet needed for the project. For example, quantity 12 equals 12 total linear feet.
Shipped pieces are limited to 8 ft maximum length. Long formed metal is expensive to package and more likely to bend during transit, so shipped orders are cut into pieces no longer than 8 ft.
Need longer pieces? Longer lengths may be available for in-store pickup at GutterAll in Damascus, Oregon or local delivery where available.
Built for Roof-Wall, Siding, Trim, and Gutter-Adjacent Transitions
Roof-wall intersections, siding terminations, fascia details, trim returns, and gutter-adjacent edges need clean metal control so runoff does not get pushed behind the exterior finish. This Supersider white step flashing gives installers a formed profile for transition work where water direction and finished appearance both matter.
Use it for: siding integration, roof-to-wall flashing, sidewall flashing, wall transition trim, fascia-adjacent flashing, exterior repair work, and gutter-related water-management details where this profile fits the assembly.
A Cleaner Edge Than Jobsite Guesswork
Flat stock can work, but it often requires more bending, checking, adjusting, and reworking in the field. A formed Supersider step flashing profile gives crews a cleaner starting point for repeatable exterior transition details.
A cleaner metal line makes the finished exterior look intentional, not patched together after the fact.
White 26ga Steel for Contractor Exterior Work
The 26ga steel construction gives contractors a formed metal profile for exterior flashing and trim work. The white finish coordinates with many common siding, trim, fascia, soffit, and gutter systems.
Use compatible fasteners, sealants, overlap practices, drainage clearances, underlayment details, siding clearances, and installation methods for the specific roof and wall assembly.
Order by Total Feet, Not by Piece Count
This item is priced and ordered by linear foot. If the project needs 24 total feet, order 24. If the order ships, it may arrive as three 8 ft pieces or another cut combination that does not exceed the 8 ft shipping length limit.
For local pickup or local delivery, ask about available longer cuts before ordering.
Key Benefits at a Glance
Cleaner Transition Lines
Helps create a crisp metal edge where siding, roofline, trim, and gutter-adjacent details meet.
Measured Footage Ordering
Buy the total linear footage needed instead of forcing the job around fixed piece quantities.
White 26ga Steel
Coordinates with many white siding, trim, soffit, fascia, and gutter systems.
Ships up to 8 ft
Shipped pieces are limited to 8 ft or less to control long-item shipping cost and damage risk.
Profile Details
| Profile Area | Measurement | Why It Matters |
|---|---|---|
| Vertical profile height | 4 in | Provides vertical coverage for compatible siding, wall, trim, and transition details. |
| Step | 1 in | Creates the defined Supersider step profile for transition work. |
| Lower returns | 3/8 in and 3/8 in | Helps shape the lower edge detail shown in the profile drawing. |
| Edge profile | 1/4 in | Completes the small lower edge return shown in the profile drawing. |
Pricing and Length Guide
| How It Works | What to Expect |
|---|---|
| Sold by foot | Quantity equals total linear feet ordered. |
| Shipping length | Maximum shipped piece length is 8 ft. |
| Local pickup | Longer pieces may be available for pickup at the Damascus, Oregon location. |
| Local delivery | Longer pieces may be available for local delivery depending on order size and route. |
| Example order | Order 20 ft and shipped pieces may be cut as 8 ft + 8 ft + 4 ft. |
Best-Fit Applications
| Application | Why It Fits |
|---|---|
| Roof-to-wall transitions | Helps create a cleaner transition where roofing meets a vertical wall or siding surface. |
| Siding integration | White formed trim profile works well where siding termination and flashing details meet. |
| Fascia and trim work | Useful for exterior edge details that need a clean metal finish and water-shedding profile. |
| Gutter-adjacent repairs | Helpful near roof edges and gutter areas where siding, wall, roof, fascia, and drainage details meet. |
| Contractor exterior work | A practical trim piece for roofers, siding crews, gutter installers, remodelers, and builders. |
Supersider Flashing vs Flat Trim Stock
| Supersider 1 in White Step Flashing | Flat Trim Stock |
|---|---|
| Formed profile for siding and roof-edge transition work. | Requires more bending, fitting, and field adjustment. |
| More consistent shape from piece to piece. | Consistency depends on field bending and installer setup. |
| White finish coordinates with common exterior finishes. | May need separate color matching or paint work. |
| Sold by foot for job-specific footage planning. | May require buying full sheets, coils, or fixed pieces. |
Key Features
| Feature | Customer Benefit |
|---|---|
| Sold by foot | Order the total footage needed for the project. |
| 8 ft maximum shipped length | Keeps shipped trim pieces within a more practical long-item shipping size. |
| 1 in Supersider step | Creates a defined step transition for siding and roof-wall details. |
| 4 in vertical profile height | Provides vertical coverage for compatible wall, siding, and trim details. |
| 26ga steel | Provides a sturdy formed metal profile for exterior use. |
| White finish | Coordinates with many white siding, fascia, soffit, and gutter systems. |
Quick Product Summary
Supersider 1 in white step flashing made from 26ga steel for roof-to-wall, siding, fascia, trim, and gutter-adjacent transition work. Sold by foot so contractors and DIY buyers can order the total linear footage needed. Shipped pieces are limited to 8 ft maximum length because long trim is expensive to ship. Longer pieces may be available for pickup or local delivery.
Key Benefits
- Sold by foot for cleaner project quantity planning
- Shipped pieces limited to 8 ft for practical long-item delivery
- Longer pieces may be available for pickup or local delivery
- 1 in Supersider step for siding and roof-wall transition details
- 4 in vertical profile height for compatible wall and siding coverage
- White finish coordinates with common exterior trim and gutter colors
- 26ga steel construction for exterior flashing and trim work
- Useful for roof-to-wall, sidewall, fascia, siding, and gutter-adjacent details
- Good option for roofers, siding crews, gutter installers, remodelers, and builders
- Helps create a cleaner finished appearance than improvised flat trim
- Practical for repair work, replacement work, and new exterior installations
- Makes quantity planning easier for measured roof-wall and siding runs
- Supports gutter-adjacent water-control work where roof, wall, trim, and fascia meet
- Helps reduce field-bending time compared with starting from flat stock
- Works with compatible fasteners, sealants, siding clearances, and flashing methods
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Supersider 1 in White Step Flashing - Sold by Foot |
| Product Type | Step flashing, sidewall flashing, siding transition trim, roof-to-wall flashing, Supersider flashing, gutter-adjacent transition flashing |
| Vertical Profile Height | 4 in |
| Step Height | 1 in |
| Bottom Return | 3/8 in |
| Secondary Return | 3/8 in |
| Edge Profile | 1/4 in |
| Material | 26ga steel |
| Finish | White |
| Sold As | Per linear foot |
| Pricing Basis | Quantity equals total linear feet selected in the purchase area. |
| Shipping Length Limit | Maximum 8 ft per shipped piece |
| Longer Pieces | Ask about longer pieces for pickup or local delivery before ordering. |
| Primary Uses | Roof-to-wall transitions, siding integration, fascia details, trim transitions, repair work, and gutter-adjacent exterior details |
| Best Fit | Exterior transition work where a white formed step flashing profile is preferred over field-bent flat stock |
| Common Accessories | Compatible fasteners, sealant, snips, roof safety gear, siding tools, underlayment, wall materials, gutter components, and fascia repair materials as needed |
| Confirm Before Use | Roof-wall assembly, siding clearance, water-resistive barrier integration, overlap direction, fastening method, roof safety plan, and whether kick-out or individual step flashing is required |
| Not Intended For | Applications requiring a different roof-wall profile, structural support, metal roof-specific flashing, tile roof flashing, or installation that conflicts with local code, siding instructions, or roof manufacturer instructions |
| Expected Service Life | Varies by coating condition, climate exposure, installation quality, cut edges, fastener choice, sealant use, drainage conditions, maintenance, and compatibility with surrounding materials. |
Who Uses This Supersider Step Flashing?
Gutter Installers and Exterior Crews
- Finishing gutter-adjacent roof-edge and siding transition details
- Coordinating white flashing with fascia, soffit, trim, and gutter systems
- Ordering exact footage for repair and replacement work
Roofers, Siding Contractors, and Remodelers
- Handling roof-to-wall and siding integration details
- Using formed flashing instead of bending every trim detail from flat stock
- Planning order footage around wall length, roof edge length, and trim layout
Experienced DIY Buyers
- Replacing damaged exterior flashing or trim near roof and siding transitions
- Ordering smaller project quantities by the foot
- Using 8 ft or shorter shipped pieces for manageable handling
Setup and Planning Guide
- Measure the total roof-to-wall, siding, trim, fascia, or gutter-adjacent transition footage needed.
- Order the total number of linear feet required.
- For shipped orders, plan around an 8 ft maximum piece length.
- For pickup or local delivery, ask about available longer pieces before ordering.
- Confirm the white finish works with the project siding, trim, roof, fascia, and gutter color.
- Confirm whether this profile fits the actual wall, roof, siding, and gutter-adjacent detail.
- Use proper flashing sequence, overlap direction, drainage clearance, and water-resistive barrier integration.
- Use compatible fasteners and sealants for the surrounding materials.
- Check the fit before fastening the full run.
- Verify runoff is directed outward and away from the wall, trim, fascia, and gutter-adjacent joint.
Installation and Ordering Notice
This flashing is sold per linear foot. Shipped pieces are limited to 8 ft maximum length because long trim is costly to ship and more likely to bend or damage during transit.
For longer pieces, use pickup or ask about local delivery availability before ordering.
Use proper flashing sequence, overlap, drainage clearance, compatible fasteners, and sealant practices for the roof and wall system being worked on.
Use safe ladder practices, gloves, eye protection, and fall protection when working at roof or gutter height.
Need Help Planning Footage or Lengths?
Use website chat for help planning total footage, shipped cut lengths, pickup options, and local delivery availability.
Order by Footage
Quantity equals total linear feet needed for the project.
Ships up to 8 ft
Shipped pieces are cut to 8 ft or less for practical delivery.
Ask About Longer Pieces
Longer pieces may be available for pickup or local delivery.
Product Summary Box
Supersider 1 in white 26ga step flashing for roof-to-wall, siding, fascia, trim, and gutter-adjacent exterior transitions. Sold by foot for exact project footage. Shipped pieces are limited to 8 ft maximum length because long trim is expensive to ship. Longer pieces may be available for pickup or local delivery. A practical formed metal profile for contractors, remodelers, siding crews, roofers, gutter installers, and experienced DIY buyers.
Frequently Asked Questions
What is Supersider 1 in white step flashing used for?
It is used for compatible roof-to-wall, sidewall, siding, trim, fascia, and gutter-adjacent transition details where a formed white step flashing profile fits the project.
How is this flashing priced and sized?
It is sold by the foot. The purchase quantity should match the total linear feet needed for the project.
Can pieces longer than 8 ft be shipped?
No. Shipped pieces are limited to 8 ft because long formed metal is costly to package and more likely to bend during transit. Longer pieces should be arranged through pickup or local delivery where available.
Is this the same as drip edge?
No. This is Supersider white step flashing for roof-wall, siding, trim, fascia, and gutter-adjacent transition work. Drip edge is a different roof-edge profile used at eaves and rakes.
What is GutterAll's return policy for this product?
GutterAll offers a 30-day return window for unused standard products in original condition. Cut, bent, scratched, installed, altered, custom-length, custom-color, or customer-damaged flashing may not be returnable unless defective. Customers should confirm footage, piece length, color, profile, pickup, delivery, and shipping limits before ordering. Return shipping or return transport is the buyer's responsibility unless the return is due to defect or fulfillment error. Refunds are processed within 5 to 7 business days after approval and receipt.
What fulfillment options are available?
In-store pickup at GutterAll in Damascus, Oregon, local delivery where available, and shipping are available depending on selected piece length. Shipped pieces are limited to 8 ft. Typical small-order handling is 1 to 2 business days, and transit time is typically 3 to 7 business days depending on destination and carrier.
Address
GutterAll
19759 SE Sunnyside Rd
Damascus, OR 97089
Hours
Mon-Fri: 7am-4pm PST
Sat: 9am-12pm PST
sales@gutterall.com
Phone
(503) 850-6784
