Supersider 1 Inch Step Flashing 26ga White Low-Slope Damascus Oregon
Supersider 1 Inch Step Flashing 26ga White Low-Slope Damascus Oregon
Couldn't load pickup availability
Supersider 1" Step Flashing - 26ga White
Gutter Contractor Low-Slope Siding Integration Solution | Code Compliant | 26-Gauge Steel | Preorder Item | Damascus Oregon
PREORDER ITEM - IN-STORE PICKUP OR LOCAL DELIVERY ONLY
The compact low-slope siding integration step flashing that roofing and gutter contractors specify for code-compliant roof-to-wall transitions. Supersider 1" Step Flashing provides professional-grade waterproof protection where low-slope roofs meet vertical walls with siding systems.
Preorder Required - Specify Color and Length | In-Store Pickup or Local Delivery Only | No Shipping
Key Benefits at a Glance
Specifically engineered for siding integration at low-slope roof-to-wall transitions.
Low-profile design for low-slope applications requiring minimal step dimension.
Extended wall coverage ensures proper siding overlap and water protection.
Professional-grade .019" thickness for durability and code compliance.
Why Gutter and Roofing Contractors Specify Supersider 1" Step Flashing
Step flashing creates the critical waterproof barrier at roof-to-wall transitions - the most common source of water intrusion in residential construction. Supersider 1" Step Flashing is specifically designed for low-slope siding integration, providing the compact step dimension needed where standard 1-1/2" step flashing would be excessive. Each piece features 26-gauge steel construction (.019" / 0.48 mm thickness) with factory-applied white finish. The profile includes a 4-inch vertical leg (4" / 102 mm) for extended wall coverage, a 1-inch horizontal step (1" / 25 mm) for shingle overlap, and the characteristic Supersider lower edge with 3/8" x 3/8" (10 mm x 10 mm) dimensions and 1/4" (6 mm) notch. The compact 1-inch step height makes this flashing ideal for low-slope applications where minimal exposure is desired while maintaining code-compliant waterproof protection. The white finish coordinates with common siding and trim colors for clean professional appearance. GutterAll stocks Supersider 1" step flashing at the Damascus, Oregon warehouse - contact to preorder with specific color and length requirements. Flashing is available for in-store pickup or local delivery only.
Supersider 1" Step Flashing - Damascus, Oregon:
Supersider 1" Step Flashing (also known as step flashing, roof flashing, wall flashing, siding flashing, roofing flashing, or transition flashing) is available for preorder at GutterAll in Damascus, Oregon. This contractor-grade low-slope siding integration step flashing features 26-gauge galvanized steel construction (.019" / 0.48 mm) with factory-applied white finish. Vertical leg 4 inches (4" / 102 mm). Horizontal step 1 inch (1" / 25 mm). Lower edge profile 3/8" x 3/8" (10 mm x 10 mm) with 1/4" (6 mm) notch. Code compliant for low-slope roof-to-wall transitions. Expected service life 20-30+ years when properly installed. Supersider design specifically accommodates siding installation while maintaining watertight protection. Preorder required with specific color and length specifications. In-store pickup or local delivery only - no shipping available for flashing products. Gutter and roofing contractors use Supersider 1" step flashing for professional low-slope siding integration projects requiring code-compliant waterproof protection. GutterAll offers Supersider Step Flashing with preorder fulfillment from the Damascus, Oregon warehouse.
| Product | Material | Availability | Fulfillment |
| Supersider 1" Step Flashing | 26ga White Steel | Preorder Required | Pickup or Local Delivery |
Preorder Location: GutterAll - 19759 SE Sunnyside Rd, Damascus, Oregon 97089 - Mon-Fri 7am-4pm, Sat 9am-2pm PST
Phone: (503) 850-6784
Email: sales@gutterall.com
Contractor Pricing: Volume discounts available for bulk preorders
Preorder Requirements - Specify When Ordering:
Supersider step flashing is a preorder item. Contact GutterAll with the following specifications when placing preorders:
White, or other available colors - specify when ordering
Specify total linear footage needed for project
Number of pieces based on roof-to-wall measurement
In-store pickup or local delivery only
Important: Flashing products are preorder items and are not available for shipping. Contact (503) 850-6784 or email sales@gutterall.com to place preorders with specific color and length requirements.
Supersider Profile Dimensions - Technical Reference:
The Supersider 1" Step Flashing features a specific profile designed for low-slope siding integration:
| Dimension | Imperial | Metric | Purpose |
|---|---|---|---|
| Vertical Leg Height | 4 inches (4") | 102 mm | Wall coverage behind siding |
| Horizontal Step | 1 inch (1") | 25 mm | Shingle overlap dimension |
| Lower Edge Profile | 3/8" x 3/8" | 10 mm x 10 mm | Water drip edge |
| Bottom Notch | 1/4 inch (1/4") | 6 mm | Shingle course clearance |
| Material Thickness | 26-gauge (.019") | 0.48 mm | Professional-grade durability |
Low-Slope Application: The compact 1-inch horizontal step makes this flashing ideal for low-slope roof applications where the standard 1-1/2" step flashing would create excessive exposure. The 4-inch vertical leg provides ample coverage for proper siding integration.
1" vs 1-1/2" Step Flashing - Contractor Selection Guide:
Selecting the correct step flashing height depends on roof slope and application requirements:
| Step Height | Best Application | Roof Slope |
|---|---|---|
| Supersider 1" (This Product) | Low-slope roof-to-wall transitions | 2:12 to 4:12 pitch |
| Supersider 1-1/2" | Standard roof-to-wall transitions | 4:12 and steeper |
Contractor Rule: Use 1" step flashing for low-slope applications where minimal step exposure is desired. Use 1-1/2" step flashing for standard-slope roofs where greater shingle overlap is needed. Both sizes meet code requirements when properly installed with correct overlap.
Step Flashing vs. No Step Flashing - Critical Comparison:
Proper step flashing protects the same roof-to-wall areas where gutter contractors often work:
| Factor | Supersider 1" Step Flashing | No Step Flashing |
|---|---|---|
| Water Protection | Watertight seal at roof-to-wall junction | Water intrusion at wall intersection |
| Code Compliance | Meets building code requirements | Code violation at roof-wall transitions |
| Low-Slope Suitability | Compact 1" step for low-slope roofs | No protection regardless of slope |
| Long-Term Durability | 26ga steel lasts 20-30+ years | Wall rot and structural damage |
| Professional Appearance | White finish coordinates with trim | Exposed shingle edges at wall |
| Siding Integration | Supersider design works with siding | Siding vulnerable to water damage |
Gutter and Roofing Work Applications:
Supersider 1" Step Flashing addresses critical waterproofing needs at low-slope roof-to-wall transitions:
| Project Type | Installation Goal | Supersider 1" Benefit |
|---|---|---|
| Low-Slope Roofing | Code-compliant low-slope transitions | Compact 1" step for minimal exposure |
| Porch Roof Tie-In | Low-slope porch meets main house | Designed for 2:12 to 4:12 pitch |
| Sunroom Addition | Low-slope sunroom roof integration | Clean transition with siding |
| Carport Construction | Low-slope carport meets house wall | Professional-grade protection |
| Shed Attachment | Low-slope shed roof tie-in | 4" vertical leg for wall coverage |
| Leak Repair | Fix low-slope roof-to-wall leaks | Replaces failed or missing flashing |
Protect critical low-slope roof-to-wall transitions with Supersider 1" Step Flashing - the compact siding integration solution that roofing and gutter contractors specify for code-compliant installations. Also known as step flashing, roof flashing, wall flashing, siding flashing, roofing flashing, or transition flashing - this contractor-grade flashing provides watertight protection where low-slope roofs meet vertical walls with siding. The compact 1-inch horizontal step (1" / 25 mm) is designed for low-slope applications where minimal step exposure is desired. Vertical leg 4 inches (4" / 102 mm) provides extended wall coverage. Material thickness 26-gauge steel (.019" / 0.48 mm). Lower edge profile 3/8" x 3/8" (10 mm x 10 mm) with 1/4" (6 mm) notch. Factory-applied white finish coordinates with common siding and trim colors. Supersider design specifically accommodates siding installation while maintaining code-compliant waterproof protection. Expected service life 20-30+ years when properly installed with correct overlap and fastening. Preorder required - contact GutterAll with specific color and length requirements. In-store pickup or local delivery only - no shipping available for flashing products. Contact (503) 850-6784 or email sales@gutterall.com to place preorders.
Key Benefits:
- Supersider Siding Integration Design: Specifically engineered to work with siding systems
- Compact 1-Inch Step Height: Low-profile dimension for low-slope roof applications
- 4-Inch Vertical Leg: Extended wall coverage ensures proper siding overlap
- 26-Gauge Steel Construction: Professional-grade .019" thickness for durability
- White Factory Finish: Clean appearance coordinates with white siding and trim
- Code Compliant: Meets building code requirements for step flashing
- Watertight Protection: Creates continuous water-shedding path at roof-wall junction
- Corrosion Resistant: Galvanized steel with factory finish resists rust
- Low-Slope Optimized: Designed for 2:12 to 4:12 pitch applications
- 3/8" x 3/8" Drip Edge: Engineered lower profile directs water away from wall
- Stepped Installation: Weaves with each shingle course for proper overlap
- Prevents Water Intrusion: Eliminates most common source of roof-wall leaks
- Multiple Color Options: White and other colors available - specify when ordering
- Long Service Life: 20-30+ year expected lifespan with proper installation
- Contractor Volume Pricing: Bulk preorder discounts available
Product Specifications:
| Product Type: | Supersider Step Flashing (Low-Slope Siding Integration) |
| Step Height: | 1 inch (1" / 25 mm) |
| Vertical Leg: | 4 inches (4" / 102 mm) |
| Lower Edge Profile: | 3/8" x 3/8" (10 mm x 10 mm) |
| Bottom Notch: | 1/4 inch (1/4" / 6 mm) |
| Material: | Galvanized Steel |
| Material Thickness: | 26-gauge (.019" / 0.48 mm) |
| Finish Color: | White (Factory Applied) |
| Design Type: | Supersider (Siding Integration) |
| Application: | Low-Slope Roof-to-Wall Transitions with Siding (2:12 to 4:12 pitch) |
| Code Compliance: | Meets Building Code Requirements |
| Minimum Overlap: | 2 inches (2" / 51 mm) between pieces |
| Corrosion Resistance: | Galvanized with Factory Finish |
| Availability: | Preorder - In-Store Pickup or Local Delivery Only |
| Expected Service Life: | 20-30+ years; galvanized steel with factory finish provides long-term corrosion resistance and waterproof protection when properly installed with correct overlap and fastening |
| Condition: | New |
Common Names - Same Professional Product:
This product goes by many names in the roofing, siding, and construction trades. Understanding these synonyms helps contractors and suppliers communicate effectively:
Step Flashing
Most common general term
Roof Flashing
Roofing trade terminology
Wall Flashing
Focus on wall protection
Siding Flashing
Siding contractor term
Roofing Flashing
General roofing supply term
Transition Flashing
Describes roof-to-wall function
Who Uses Supersider 1" Step Flashing?
Roofing and Gutter Contractors
- Low-slope roof installations
- Porch roof tie-ins
- Carport and shed attachments
- Low-slope re-roofing projects
- Leak repair at low-slope junctions
- Code-compliant installations
Contractor Benefit: Supersider 1" step flashing provides code-compliant siding integration with compact profile for low-slope applications. The 26ga steel construction ensures long-term durability. Preorder with specific color and length requirements from the GutterAll Damascus warehouse - in-store pickup or local delivery only.
Siding Contractors and Builders
- Low-slope new construction
- Siding replacement with low-slope roofs
- Sunroom and addition tie-ins
- Porch and covered entry projects
- Code inspection preparation
- Professional finish requirements
Builder Benefit: The compact 1" step height creates minimal exposure at low-slope transitions while maintaining code compliance. White factory finish coordinates with common siding colors. Volume pricing available for bulk preorders.
Common Applications:
| Application | Setting | Why Supersider 1" Step Flashing |
| Low-Slope Roof-to-Wall | Where 2:12 to 4:12 slope meets wall | Compact step for minimal exposure |
| Porch Roof Tie-In | Covered porch meets main house | Low-slope optimized design |
| Sunroom Addition | Sunroom roof at house wall | Clean siding integration |
| Carport Attachment | Carport roof meets house | Professional-grade protection |
| Shed Lean-To | Attached shed roof at wall | 4" vertical for wall coverage |
| Low-Slope Leak Repair | Failed flashing at low-slope junction | Code-compliant replacement |
Installation Guide - How to Install Supersider 1" Step Flashing:
- Prepare Wall Surface: Ensure wall sheathing is clean and dry. Remove old flashing if replacing. Install ice and water shield or roofing felt on deck up to wall. For low-slope applications (2:12 to 4:12), ensure adequate underlayment overlap.
- Install First Shingle Course: Begin with starter strip and first shingle course at the bottom of the roof-to-wall transition. Position shingle to extend to wall intersection. On low-slope roofs, verify proper exposure for the roof pitch.
- Position First Step Flashing: Place first piece of Supersider 1" step flashing so the 1-inch horizontal step rests on the shingle course and the 4-inch vertical leg extends up the wall. The 3/8" x 3/8" lower edge creates a drip profile directing water onto the shingle.
- Secure to Wall: Fasten the upper portion of the 4-inch vertical leg to wall sheathing with roofing nails. Do not nail through exposed horizontal surface - fasten only the vertical leg that will be covered by siding.
- Install Next Shingle: Place next shingle course overlapping the 1-inch horizontal step. The shingle should cover the flashing nail heads. Maintain proper exposure for the low-slope pitch.
- Continue Stepped Pattern: Position next step flashing piece overlapping the previous by at least 2 inches (51 mm). Repeat shingle-then-flashing sequence up entire roof-to-wall transition.
- Verify Continuous Overlap: Each step flashing piece must overlap the one below. Water should flow over each piece to the next, never behind the flashing. The 3/8" drip edge on each piece directs water onto the shingle below.
- Install Siding Over Flashing: After roof is complete, install siding over the 4-inch vertical legs of step flashing. Supersider design accommodates standard siding installation. Maintain 1-2 inch (25-51 mm) clearance between siding and shingles.
Low-Slope Code Tip: Building codes require step flashing at all roof-to-wall transitions regardless of pitch. The compact 1" step height is specifically designed for low-slope applications where minimal exposure is desired. Verify local code requirements for low-slope roofing underlayment and flashing before installation.
Frequently Asked Questions:
Q: What is the difference between Supersider 1" and 1-1/2" step flashing?
The 1" step flashing features a compact horizontal step designed for low-slope roof applications (2:12 to 4:12 pitch) where minimal step exposure is desired. The 1-1/2" version is for standard-slope roofs (4:12 and steeper) where greater shingle overlap is needed. Both versions feature the same 4" vertical leg and Supersider siding integration design.
Q: What do the profile dimensions (4", 1", 3/8" x 3/8", 1/4") mean?
The 4" refers to the vertical leg height that extends up the wall behind siding. The 1" is the horizontal step that overlaps with shingles. The 3/8" x 3/8" is the lower drip edge profile that directs water onto the shingle below. The 1/4" notch provides clearance for the shingle course. These dimensions are optimized for low-slope siding integration applications.
Q: Why use 1" step flashing instead of 1-1/2"?
The 1" step flashing creates minimal exposure at roof-to-wall transitions, which is ideal for low-slope applications. On low-slope roofs, the shingle courses are closer together due to greater overlap requirements, so a compact step flashing maintains proper proportions. Using oversized step flashing on low-slope roofs can create aesthetic issues and installation complications.
Q: Why is this product preorder only with no shipping?
Flashing products require specific color and length specifications for each project. GutterAll fulfills flashing orders through preorder to ensure contractors receive exactly what they need. In-store pickup or local delivery only - no shipping available for flashing products. Contact (503) 850-6784 or email sales@gutterall.com with your color, length, and quantity requirements.
Q: What colors are available besides white?
Supersider 1" step flashing is available in multiple colors to match common siding and trim colors. Contact GutterAll to inquire about available colors. Specify your color preference when placing preorders. White is the most common finish and coordinates with white siding, fascia, and trim.
Q: How do I calculate how much step flashing I need?
Measure the total linear length of all roof-to-wall transitions. For each linear foot of transition, plan approximately one step flashing piece per shingle course. On low-slope roofs with greater shingle overlap, more pieces may be needed per linear foot. Add 10-15% extra for overlaps and waste. Contact GutterAll with your measurements for quantity guidance and to place preorders with specific length requirements.
Installation and Safety Notice
Step flashing installation requires roofing work at height - always follow proper safety protocols. Use appropriate fall protection when working on roofs. Low-slope roofs require extra caution due to reduced traction. Follow building code requirements for step flashing dimensions and overlap. Do not nail through exposed horizontal flashing surface - fasten only the vertical leg that will be covered by siding. Ensure each piece overlaps the one below by at least 2 inches. The 3/8" x 3/8" drip edge must direct water onto the shingle below. Maintain continuous water-shedding path with no gaps or reverse laps. Install siding with proper clearance above shingles. Cut edges may be sharp - wear appropriate gloves during handling and installation. GutterAll provides step flashing for licensed contractors and experienced builders - proper installation is the responsibility of the installer. Verify local building code requirements for low-slope roofing before installation.
Preorder Required - In-Store Pickup or Local Delivery Only
Contact GutterAll to preorder Supersider 1" Step Flashing with your specific requirements.
Flashing products require preorder with specific color, length, and quantity specifications. In-store pickup at the Damascus, Oregon warehouse or local delivery available - no shipping for flashing products. Volume pricing available for contractors placing bulk preorders. Contact GutterAll to discuss your low-slope project requirements and place preorders.
Contact GutterAll: (503) 850-6784
Or email: sales@gutterall.com
GutterAll - Supersider 1" Step Flashing
The compact low-slope siding integration step flashing for code-compliant roof-to-wall transitions. Supersider 1" Step Flashing features 26-gauge galvanized steel construction (.019" / 0.48 mm) with factory-applied white finish. Also known as step flashing, roof flashing, wall flashing, siding flashing, roofing flashing, or transition flashing. Vertical leg 4" (102 mm). Horizontal step 1" (25 mm). Lower edge 3/8" x 3/8" (10 mm x 10 mm). Notch 1/4" (6 mm). Supersider design specifically accommodates siding installation. Code compliant. 20-30+ year expected service life. Preorder required with specific color and length requirements. In-store pickup or local delivery only - no shipping. Contact for pricing and availability.
GutterAll - Damascus, Oregon
Professional Gutter and Roofing Supplies for Contractors
19759 SE Sunnyside Rd
Damascus, OR 97089
Mon-Fri: 7am-4pm
Sat: 9am-2pm PST
sales@gutterall.com
(503) 850-6784
